Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A Novel On-Chip Liquid-Metal-Enabled Microvalve.

ABSTRACT: A room temperature liquid metal-based microvalve has been proposed in this work. The microvalve has the advantages of easy fabrication, high flexibility, and a low leak rate. By designing a posts array in the channel, the liquid metal can be controlled to form a deformable valve boss and block the flow path. Besides, through adjustment of the pressure applied to the liquid metal, the microvalve can perform reliable switching commands. To eliminate the problem that liquid metal is easily oxidized, which causes the microvalve to have poor repeatability, a method of electrochemical cathodic protection has been proposed, which significantly increases the number of open/close switch cycles up to 145. In addition, this microvalve overcomes the shortcomings of the traditional microvalve that requires an alignment process to assemble all the parts. When the valve is closed, no leak rate is detected at ≤320 mbar, and the leak rate is ≤0.043 μL/min at 330 mbar, which indicates it has good tightness. As an application, we also fabricate a chip that can control bubble flow based on this microvalve. Therefore, this microvalve has great prospects in the field of microfluidics.

SUBMITTER: Gong J

PROVIDER: S-EPMC8467270 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Liquid metal enabled pump.

Project description:Small-scale pumps will be the heartbeat of many future micro/nanoscale platforms. However, the integration of small-scale pumps is presently hampered by limited flow rate with respect to the input power, and their rather complicated fabrication processes. These issues arise as many conventional pumping effects require intricate moving elements. Here, we demonstrate a system that we call the liquid metal enabled pump, for driving a range of liquids without mechanical moving parts, upon the application of modest electric field. This pump incorporates a droplet of liquid metal, which induces liquid flow at high flow rates, yet with exceptionally low power consumption by electrowetting/deelectrowetting at the metal surface. We present theory explaining this pumping mechanism and show that the operation is fundamentally different from other existing pumps. The presented liquid metal enabled pump is both efficient and simple, and thus has the potential to fundamentally advance the field of microfluidics.

| S-EPMC3948272 | biostudies-literature

A Microfluidic Chip for Liquid Metal Droplet Generation and Sorting

Project description: Not available

| S-EPMC6190479 | biostudies-literature

On-Chip Production of Size-Controllable Liquid Metal Microdroplets Using Acoustic Waves.

Project description:Micro- to nanosized droplets of liquid metals, such as eutectic gallium indium (EGaIn) and Galinstan, have been used for developing a variety of applications in flexible electronics, sensors, catalysts, and drug delivery systems. Currently used methods for producing micro- to nanosized droplets of such liquid metals possess one or several drawbacks, including the lack in ability to control the size of the produced droplets, mass produce droplets, produce smaller droplet sizes, and miniaturize the system. Here, a novel method is introduced using acoustic wave-induced forces for on-chip production of EGaIn liquid-metal microdroplets with controllable size. The size distribution of liquid metal microdroplets is tuned by controlling the interfacial tension of the metal using either electrochemistry or electrocapillarity in the acoustic field. The developed platform is then used for heavy metal ion detection utilizing the produced liquid metal microdroplets as the working electrode. It is also demonstrated that a significant enhancement of the sensing performance is achieved by introducing acoustic streaming during the electrochemical experiments. The demonstrated technique can be used for developing liquid-metal-based systems for a wide range of applications.

| S-EPMC6311111 | biostudies-literature

Reactive wetting enabled anchoring of non-wettable iron oxide in liquid metal for miniature soft robot.

Project description:Magnetic liquid metal (LM) soft robots attract considerable attentions because of distinctive immiscibility, deformability and maneuverability. However, conventional LM composites relying on alloying between LM and metallic magnetic powders suffer from diminished magnetism over time and potential safety risk upon leakage of metallic components. Herein, we report a strategy to composite inert and biocompatible iron oxide (Fe3O4) magnetic nanoparticles into eutectic gallium indium LM via reactive wetting mechanism. To address the intrinsic interfacial non-wettability between Fe3O4 and LM, a silver intermediate layer was introduced to fuse with indium component into AgxIny intermetallic compounds, facilitating the anchoring of Fe3O4 nanoparticles inside LM with improved magnetic stability. Subsequently, a miniature soft robot was constructed to perform various controllable deformation and locomotion behaviors under actuation of external magnetic field. Finally, practical feasibility of applying LM soft robot in an ex vivo porcine stomach was validated under in-situ monitoring by endoscope and X-ray imaging.

| S-EPMC10560245 | biostudies-literature

Liquid repellency enabled antipathogen coatings.

Project description:Currently, Coronavirus Disease 2019 (COVID-19)-a respiratory contagion spreading through expiratory droplets-has evolved into a global pandemic, severely impacting the public health. Importantly, the emerging of immune evasion SARS-CoV-2 variants and the limited effect of current antivirals against SARS-CoV-2 in clinical trials suggested that alternative strategies in addition to the conventional vaccines and antivirals are required to successfully control the COVID-19 pandemic. Here, we propose to use liquid-repellent coatings to prevent the spread of the disease in the absence of effective vaccines, antimicrobial agents, or therapeutics, wherein the deposition and penetration of pathogen droplets are prohibited. We use SARS-CoV-2 as a model pathogen and find that SARS-CoV-2 remnants are reduced by seven orders of magnitude on coated surfaces, yielding a repelling efficacy far outperforming the inactivation rate of disinfectants. The SARS-CoV-2 remnant scales exponentially with the liquid/solid adhesion, uncovering the mechanism and effective means for minimizing pathogen attachment. The antipathogen coating that both repels and inactivates pathogens is demonstrated by incorporating the super-liquid-repellent coating with antipathogen additives. Together with its versatility over a wide range of substrates and pathogens, the novel antipathogen coating is of considerable value for infection control in everyday life as well as during pandemics.

| S-EPMC8495064 | biostudies-literature

Liquid Metal Patterned Stretchable and Soft Capacitive Sensor with Enhanced Dielectric Property Enabled by Graphite Nanofiber Fillers.

Project description:In this work, we introduce liquid metal patterned stretchable and soft capacitive sensor with enhanced dielectric properties enabled by graphite nanofiber (GNF) fillers dispersed in polydimethylsiloxane (PDMS) substrate. We oxidized gallium-based liquid metal that exhibited excellent wetting behavior on the surface of the composites to enable patterning of the electrodes by a facile stencil printing. The fluidic behavior of the liquid metal electrode and modulated dielectric properties of the composite (k = 6.41 ± 0.092@6 wt % at 1 kHz) was utilized to fabricate stretchable and soft capacitive sensor with ability to distinguish various hand motions.

| S-EPMC8879769 | biostudies-literature

Liquid-Crystal-Enabled Active Plasmonics: A Review.

Project description:Liquid crystals are a promising candidate for development of active plasmonics due to their large birefringence, low driving threshold, and versatile driving methods. We review recent progress on the interdisciplinary research field of liquid crystal based plasmonics. The research scope of this field is to build the next generation of reconfigurable plasmonic devices by combining liquid crystals with plasmonic nanostructures. Various active plasmonic devices, such as switches, modulators, color filters, absorbers, have been demonstrated. This review is structured to cover active plasmonic devices from two aspects: functionalities and driven methods. We hope this review would provide basic knowledge for a new researcher to get familiar with the field, and serve as a reference for experienced researchers to keep up the current research trends.

| S-EPMC5453087 | biostudies-other

Metamaterial-enabled arbitrary on-chip spatial mode manipulation.

Project description:On-chip spatial mode operation, represented as mode-division multiplexing (MDM), can support high-capacity data communications and promise superior performance in various systems and numerous applications from optical sensing to nonlinear and quantum optics. However, the scalability of state-of-the-art mode manipulation techniques is significantly hindered not only by the particular mode-order-oriented design strategy but also by the inherent limitations of possibly achievable mode orders. Recently, metamaterials capable of providing subwavelength-scale control of optical wavefronts have emerged as an attractive alternative to manipulate guided modes with compact footprints and broadband functionalities. Herein, we propose a universal yet efficient design framework based on the topological metamaterial building block (BB), enabling the excitation of arbitrary high-order spatial modes in silicon waveguides. By simply programming the layout of multiple fully etched dielectric metamaterial perturbations with predefined mathematical formulas, arbitrary high-order mode conversion and mode exchange can be simultaneously realized with uniform and competitive performance. The extraordinary scalability of the metamaterial BB frame is experimentally benchmarked by a record high-order mode operator up to the twentieth. As a proof of conceptual application, an 8-mode MDM data transmission of 28-GBaud 16-QAM optical signals is also verified with an aggregate data rate of 813 Gb/s (7% FEC). This user-friendly metamaterial BB concept marks a quintessential breakthrough for comprehensive manipulation of spatial light on-chip by breaking the long-standing shackles on the scalability, which may open up fascinating opportunities for complex photonic functionalities previously inaccessible.

| S-EPMC9160251 | biostudies-literature

A Novel Flexible Liquid Metal Microheater with a Textured Structure.

Project description:In this paper, we propose a novel liquid metal microheater utilizing a textured structure. This microheater effectively solves the problem of the liquid metal in the PDMS flow channel fracturing at a certain temperature and significantly increases the maximum operating temperature that can be achieved by the current liquid metal microheater. Experimental results demonstrate that this new structured microheater can achieve a maximum operating temperature exceeding 300 °C. To explain the performance improvement and the reasons behind liquid metal fracture, corresponding experiments were conducted, and explanations were provided based on the experimental results. Subsequently, we verified the mechanical flexibility of the microheater and found that it exhibits excellent tensile and bending resistance. Finally, utilizing its good mechanical flexibility, the microheater was successfully attached to the side wall of a cup, resulting in the boiling of water.

| S-EPMC10818653 | biostudies-literature

Liquid metal motor.

Project description:Liquid metal has demonstrated an enormous potential for developing soft functional devices and machines. However, current liquid metal enabled machines suffer from several issues, such as the requirement of a liquid environment, generation of weak actuating forces, and insufficient maneuverability. To overcome these restrictions, here, a motor is developed based on the electrical actuation of liquid metal droplets without the need for conventional electromagnets. The approach is distinguished by (1) the encapsulation of electrolyte and multiple liquid metal droplets within an enclosed system, and (2) the creation of stable and continuous torque outside a liquid environment. In addition, a liquid metal electrical brush is introduced to operate the motor with low friction and low wear. The unique driving mechanism endows the motor with several advantages, including low friction, no sparking, low noise, versatile working environment, and being built from soft materials that could offer new opportunities for developing soft robotics.

| S-EPMC7772565 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data