Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis of Molybdenum Sulfide/Tellurium Hetero-Composite by a Simple One-Pot Hydrothermal Technique for High-Performance Supercapacitor Electrode Material.

ABSTRACT: It is necessary to investigate effective energy storage devices that can fulfill the requirements of short-term and long-term durable energy outputs. Here, we report a simple one-pot hydrothermal technique through which to fabricate the MoS₂/Te nanocomposite to be used as an effective electrode material for high-performance supercapacitors. Comprehensive characterization of the as-fabricated nanomaterial was performed using FESEM, HRTEM, XRD, FTIR, XPS, etc., as well as electrochemical characterizations. The electrochemical characterization of the as-fabricated nanocomposite electrode material showed a high specific capacitance of 402.53 F g^-1 from a galvanostatic charge-discharge (GCD) profile conducted at 1 A g^-1 current density. The electrode material also showed significant rate performance with high cyclic stability reaching up to 92.30% under 4000 cycles of galvanostatic charge-discharge profile at a current density of 10 A g^-1. The highly encouraging results obtained using this simple synthetic approach demonstrate that the hetero-structured nanocomposite of MoS₂/Te electrode material could serve as a promising composite to use in effective supercapacitors or energy storage devices.

SUBMITTER: Karki HP

PROVIDER: S-EPMC8468014 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Simple Synthesis of Molybdenum Disulfide/Reduced Graphene Oxide Composite Hollow Microspheres as Supercapacitor Electrode Material.

Project description:MoS₂/RGO composite hollow microspheres were hydrothermally synthesized by using SiO₂/GO microspheres as a template, which were obtained via the sonication-assisted interfacial self-assembly of tiny GO sheets on positively charged SiO₂ microspheres. The structure, morphology, phase, and chemical composition of MoS₂/RGO hollow microspheres were systematically investigated by a series of techniques such as FE-SEM, TEM, XRD, TGA, BET, and Raman characterizations, meanwhile, their electrochemical properties were carefully evaluated by CV, GCD, and EIS measurements. It was found that MoS₂/RGO hollow microspheres possessed unique porous hollow architecture with high-level hierarchy and large specific surface area up to 63.7 m²·g-1. When used as supercapacitor electrode material, MoS₂/RGO hollow microspheres delivered a maximum specific capacitance of 218.1 F·g-1 at the current density of 1 A·g-1, which was much higher than that of contrastive bare MoS₂ microspheres developed in the present work and most of other reported MoS₂-based materials. The enhancement of supercapacitive behaviors of MoS₂/RGO hollow microspheres was likely due to the improved conductivity together with their distinct structure and morphology, which not only promoted the charge transport but also facilitated the electrolyte diffusion. Moreover, MoS₂/RGO hollow microsphere electrode displayed satisfactory long-term stability with 91.8% retention of the initial capacitance after 1000 charge/discharge cycles at the current density of 3 A·g-1, showing excellent application potential.

| S-EPMC5457065 | biostudies-other

Novel biomass-derived smoke-like carbon as a supercapacitor electrode material.

Project description:In this present work, smoke-like carbon was successfully fabricated from a bio-waste fungal substrate crude polysaccharide for the first time. The as-prepared products possess smoke-like structures, ultra-high specific surface area (S BET: 2160 m2 g-1) and a high content of micropores (microporous surface area of 60%, with a nanopore size of 0.70 nm), which can increase the specific capacitance, representing a wonderful structure for electrochemical energy storage devices. The as-prepared sample displayed an excellent specific capacitance of 152 F g-1 at 5 A g-1 in the three-electrode configuration and exhibited maximal densities of 6.8-10.2 W h kg-1 under power outputs of 253.4-24.3 kW kg-1. We believe that this work demonstrates a simple, green and low-cost route by using agricultural residue to prepare applicable carbon materials for use in energy storage devices.

| S-EPMC6689642 | biostudies-literature

Vanadium oxide nanorods as an electrode material for solid state supercapacitor.

Project description:The electrochemical properties of metal oxides are very attractive and fascinating in general, making them a potential candidate for supercapacitor application. Vanadium oxide is of particular interest because it possesses a variety of valence states and is also cost effective with low toxicity and a wide voltage window. In the present study, vanadium oxide nanorods were synthesized using a modified sol-gel technique at low temperature. Surface morphology and crystallinity studies were carried out by using scanning electron microscopy, transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy analysis. To the best of our knowledge, the as-prepared nanorods were tested with magnesium ion based polymer gel electrolyte for the first time. The prepared supercapacitor cell exhibits high capacitance values of the order of ~ 141.8 F g-1 with power density of ~ 2.3 kW kg-1 and energy density of ~ 19.1 Wh kg-1. The cells show excellent rate capability and good cycling stability.

| S-EPMC9723181 | biostudies-literature

High-performance freestanding supercapacitor electrode based on polypyrrole coated nickel cobalt sulfide nanostructures.

Project description:In the present work, we report the successful fabrication of dandelion-like Nickel-Cobalt Sulfide@Polypyrrole microspheres through the hydrothermal method and its possible application as a binder-free electrode in supercapacitors. This electrode exhibited low charge transfer resistance with a remarkable specific capacitance of 2554.9 F g-1 at 2.54 A g-1, in addition to considerable cycle life stability. Also, an asymmetric device was prepared using NiCo2S4@PPy/NF as positive and rGO/NF as negative electrodes. This asymmetric supercapacitor exhibited a specific capacitance of 98.9 F g-1 at 1.84 A g-1 and delivered an energy density of 35.17 Wh kg-1 at a power density of 1472 W kg-1. Such a remarkable performance can be originated from the synergy effect of NiCo2S4 and PPy and the direct deposition of the composite on the current collector. Our findings suggest the dandelion-like NiCo2S4@PPy as a promising material for making high-performance supercapacitors.

| S-EPMC8930993 | biostudies-literature

New Limits for Stability of Supercapacitor Electrode Material Based on Graphene Derivative.

Project description:Supercapacitors offer a promising alternative to batteries, especially due to their excellent power density and fast charging rate capability. However, the cycling stability and material synthesis reproducibility need to be significantly improved to enhance the reliability and durability of supercapacitors in practical applications. Graphene acid (GA) is a conductive graphene derivative dispersible in water that can be prepared on a large scale from fluorographene. Here, we report a synthesis protocol with high reproducibility for preparing GA. The charging/discharging rate stability and cycling stability of GA were tested in a two-electrode cell with a sulfuric acid electrolyte. The rate stability test revealed that GA could be repeatedly measured at current densities ranging from 1 to 20 A g-1 without any capacitance loss. The cycling stability experiment showed that even after 60,000 cycles, the material kept 95.3% of its specific capacitance at a high current density of 3 A g-1. The findings suggested that covalent graphene derivatives are lightweight electrode materials suitable for developing supercapacitors with extremely high durability.

| S-EPMC7558132 | biostudies-literature

Preparation and Laser Marking Properties of Poly(propylene)/Molybdenum Sulfide Composite Materials.

Project description:In this study, using molybdenum sulfide (MoS2) as laser-sensitive particles and poly(propylene) (PP) as the matrix resin, laser-markable PP/MoS2 composite materials with different MoS2 contents ranging from 0.005 to 0.2% were prepared by melt-blending. A comprehensive analysis of the laser marking performance of PP/MoS2 composites was carried out by controlling the content of laser additives, laser current intensity, and the scanning speed of laser marking. The color difference test shows that the best laser marking performance of the composite can be obtained at the MoS2 content of 0.02 wt %. The surface morphology of the PP/MoS2 composite material was observed after laser marking using a metallographic microscope, an optical microscope, and a scanning electron microscope (SEM). During the laser marking process, the laser energy was absorbed and converted into heat energy to cause high-temperature melting, pyrolysis, and carbonization of PP on the surface of the PP/MoS2 composite material. The black marking from carbonized materials was formed in contrast to the white matrix. Using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and Raman spectroscopy, the composite materials before and after laser marking were tested and characterized. The PP/MoS2 composite material was pyrolyzed to form amorphous carbonized materials. The effect of the laser-sensitive MoS2 additive on the mechanical properties of composite materials was investigated. The results show that the PP/MoS2 composite has the best laser marking property when the MoS2 loading content is 0.02 wt %, the laser marking current intensity is 11 A, and the laser marking speed is 800 mm/s, leading to a clear and high-contrast marking pattern.

| S-EPMC8028170 | biostudies-literature

Cost-Effective Synthesis of Efficient CoWO4/Ni Nanocomposite Electrode Material for Supercapacitor Applications.

Project description:In the present study, the synthesis of CoWO4 (CWO)-Ni nanocomposites was conducted using a wet chemical method. The crystalline phases and morphologies of the Ni nanoparticles, CWO, and CWO-Ni composites were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and energy-dispersive X-ray spectroscopy (EDAX). The electrochemical properties of CWO and CWO-Ni composite electrode materials were assessed by cyclic voltammetry (CV), and galvanostatic charge-discharge (GCD) tests using KOH as a supporting electrolyte. Among the CWO-Ni composites containing different amounts of Ni1, Ni2, and Ni3, CWO-Ni3 exhibited the highest specific capacitance of 271 F g-1 at 1 A g-1, which was greater than that of bare CWO (128 F g-1). Moreover, the CWO-Ni3 composite electrode material displayed excellent reversible cyclic stability and maintained 86.4% of its initial capacitance after 1500 discharge cycles. The results obtained herein demonstrate that the prepared CWO-Ni3 nanocomposite is a promising electrode candidate for supercapacitor applications.

| S-EPMC7692640 | biostudies-literature

Cobalt Sulfide/Graphene Composite Hydrogel as Electrode for High-Performance Pseudocapacitors.

Project description:Graphene and its composite hydrogels with interconnected three-dimensional (3D) structure have raised continuous attention in energy storage. Herein, we describe a simple hydrothermal strategy to synthesize 3D CoS/graphene composite hydrogel (CGH), which contains the reduction of GO sheets and anchoring of CoS nanoparticles on graphene sheets. The formed special 3D structure endows this composite with high electrochemical performance. Remarkably, the obtained 3D CGH exhibits high specific capacitance (C(s)) of 564 F g(-1) at a current density of 1 A g(-1) (about 1.3 times higher than pure CoS), superior rate capability and high stability. It is worth mentioning that this methodology is readily adaptable to decorating CoS nanoparticles onto graphene sheets and may be extended to the preparation of other pseudocapacitive materials based on graphene hydrogels for electrochemical applications.

| S-EPMC4754945 | biostudies-literature

Hybrid ?-Fe2O3@Ni(OH)2 nanosheet composite for high-rate-performance supercapacitor electrode.

Project description:In this study, we report a facile fabrication of ultrathin two-dimensional (2D) nanosheet hybrid composite, ?-Fe2O3 nanosheet@Ni(OH)2 nanosheet, by a two-step hydrothermal method to achieve high specific capacitance and good stability performance at high charging/discharging rates when serving as electrode material of supercapacitors. The ?-Fe2O3@Ni(OH)2 hybrid electrode not only has a smooth decrease of the specific capacitance with increasing current density, compared with the sharp decline of single component of Ni(OH)2 electrode, but also presents excellent rate capability with a specific capacitance of 356?F/g at a current density of 16?A/g and excellent cycling stability (a capacity retention of 93.3% after 500?cycles), which are superior to the performances of Ni(OH)2 with a lower specific capacitance of 132?F/g and a lower capacity retention of 81.8% at 16?A/g. The results indicate such hybrid structure would be promising as excellent electrode material for good performances at high current densities in the future.

| S-EPMC4995458 | biostudies-literature

Surface Characteristic Effect of Ag/TiO2 Nanoarray Composite Structure on Supercapacitor Electrode Properties.

Project description:Ag-ion-modified titanium nanotube (Ag/TiO2-NT) arrays were designed and fabricated as the electrode material of supercapacitors for electrochemical energy storage. TiO2 nanotube (NT) arrays were prepared by electrochemical anodic oxidation and then treated by Ag metal vapor vacuum arc (MEVVA) implantation. The Ag amount was controlled via adjusting ion implantation parameters. The morphology, crystallinity, and electrochemistry properties of as-obtained Ag/TiO2-NT electrodes were distinguished based on various characterizations. Compared with different doses of Ag/TiO2-NTs, the electrode with the dose of 5.0 × 1017 ions·cm-2 exhibited much higher electrode capacity and greatly enhanced activity in comparison to the pure TiO2-NTs. The modified electrode showed a high capacitance of 9324.6 mF·cm-3 (86.9 mF·g, 1.2 mF·cm-2), energy density of 82.8 μWh·cm-3 (0.8 μWh·g, 0.0103 μWh·cm-2), and power density of 161.0 mW·cm-3 (150.4 μW·g, 2.00 μW·cm-2) at the current density of 0.05 mA. Therefore, Ag/TiO2-NTs could act as a feasible electrode material of supercapacitors.

| S-EPMC6081553 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data