Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Colored Surfaces Made of Synthetic Eumelanin.

ABSTRACT: The polymerization of 3,4-dihydroxy-L-phenylalanine leads to a carboxylic acid-rich synthetic melanin-like material (poly-L-DOPA). Synthetic melanin most resembles natural eumelanin in chemical structure. However, its deposition on surfaces leading to colored surfaces by interference is not as easy to accomplish as in the case of the preparation of colored surfaces by dopamine hydrochloride polymerization. This study deals with the preparation of new colored surfaces made from poly-L-DOPA displaying vivid colors by interference. These surfaces were obtained by depositing thin films of poly-L-DOPA on a reflective silicon nitride substrate. A high ionic strength in the polymerization medium was essential to accomplish the coating. The effect of ionic strength on the resulting surfaces was studied via reflectance, Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). The refractive index was determined by ellipsometry, and was nearly constant to 1.8 when λ > 650 nm. In the visible spectral region, the imaginary part of the refractive index becomes relevant. The refractive index in the visible wavelength range (400-600 nm) was in the range 1.7-1.80.

SUBMITTER: Marcelo G

PROVIDER: S-EPMC8468714 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

sensaas: Shape-based Alignment by Registration of Colored Point-based Surfaces.

Project description:sensaas is a tool developed for aligning and comparing molecular shapes and sub-shapes. Alignment is obtained by registration of 3D point-based representations of the van der Waals surface. The method uses local properties of the shape to identify the correspondence relationships between two point clouds containing up to several thousand colored (labeled) points. Our rigid-body superimposition method follows a two-stage approach. An initial alignment is obtained by matching pose-invariant local 3D descriptors, called FPFH, of the input point clouds. This stage provides a global superimposition of the molecular surfaces, without any knowledge of their initial pose in 3D space. This alignment is then refined by optimizing the matching of colored points. In our study, each point is colored according to its closest atom, which itself belongs to a user defined physico-chemical class. Finally, sensaas provides an alignment and evaluates the molecular similarity by using Tversky coefficients. To assess the efficiency of this approach, we tested its ability to reproduce the superimposition of X-ray structures of the benchmarking AstraZeneca (AZ) data set and, compared its results with those generated by the two shape-alignment approaches shaep and shafts. We also illustrated submatching properties of our method with respect to few substructures and bioisosteric fragments. The code is available upon request from the authors (demo version at https://chemoinfo.ipmc.cnrs.fr/SENSAAS).

| S-EPMC7507133 | biostudies-literature

Effects of Shape, Roughness and Gloss on the Perceived Reflectance of Colored Surfaces.

Project description:This study examined perceptual differentiation of specular from diffuse shading for the recovery of surface color and gloss. In Experiment 1, we parametrically varied the mesoscale relief height of globally planar surfaces, specular sharpness and the orientation of the surface relative to the light source. We obtained psychophysical matches for perceived color saturation and value (HSV), but also considered whether the main effects could be influenced by color space used when transforming data to perceptually-uniform CIE LCH space. Results revealed strong interactions between perceived color attributes and the lighting conditions, the structure of specular reflections, and surface relief. Declines in saturation were observed with increasing specular roughness (using an HSV color representation), but no similar decline was observed in chroma (using a CIE LCH color representation). Experiment 2 found strong negative correlations between perceived gloss and specular roughness. Perceived gloss also depended on mesoscopic relief height and orientation of the surface relative to the light source. Declines in perceived gloss moderately accounted for the variability in color saturation and value matches obtained in Experiment 1. We found information about perceived specular coverage could further improve the model's accountability of perceived color saturation and lightness (Experiment 3). These findings together suggest that perceived color saturation and color value depends on the visual system's ability to distinguish the underlying diffuse shading from specular highlights in images.

| S-EPMC7101081 | biostudies-literature

Nanoshells made easy: improving Au layer growth on nanoparticle surfaces.

Project description:The growth of a continuous, uniform Au layer on a dielectric nanoparticle is the critical step in the synthesis of nanoparticles such as nanoshells or nanorice, giving rise to their unique geometry-dependent plasmon resonant properties. Here, we report a novel, streamlined method for Au layer metallization on prepared nanoparticle surfaces using carbon monoxide as the reducing agent. This approach consistently yields plasmonic nanoparticles with highly regular shell layers and is immune to variations in precursor or reagent preparation. Single particle spectroscopy combined with scanning electron microscopy reveal that thinner, more uniform shell layers with correspondingly red-shifted optical resonances are achievable with this approach.

| S-EPMC5922771 | biostudies-literature

Exploitation of desilylation chemistry in tailor-made functionalization on diverse surfaces.

Project description:Interface engineering to attain a uniform and compact self-assembled monolayer at atomically flat surfaces plays a crucial role in the bottom-up fabrication of organic molecular devices. Here we report a promising and operationally simple approach for modification/functionalization not only at ultraflat single-crystal metal surfaces, M(111) (M=Au, Pt, Pd, Rh and Ir) but also at the highly oriented pyrolytic graphite surface, upon efficient in situ cleavage of trimethylsilyl end groups of the molecules. The obtained self-assembled monolayers are ultrastable within a wide potential window. The carbon-surface bonding on various substrates is confirmed by shell-isolated nanoparticle-enhanced Raman spectroscopy. Application of this strategy in tuning surface wettability is also demonstrated. The most valuable finding is that a combination of the desilylation with the click chemistry represents an efficient method for covalent and tailor-made functionalization of diverse surfaces.

| S-EPMC4382705 | biostudies-literature

Pseudomonas aeruginosa detachment from surfaces via a self-made small molecule.

Project description:Pseudomonas aeruginosa is a significant threat in both healthcare and industrial biofouling. Surface attachment of P. aeruginosa is particularly problematic as surface association induces virulence and is necessary for the ensuing process of biofilm formation, which hampers antibiotic treatments. Previous efforts have searched for dispersal agents of mature biofilm collectives, but there are no known factors that specifically disperse individual surface-attached P. aeruginosa. In this study, we develop a quantitative single-cell surface-dispersal assay and use it to show that P. aeruginosa itself produces factors that can stimulate its dispersal. Through bioactivity-guided fractionation, mass spectrometry, and nuclear magnetic resonance, we elucidated the structure of one such factor, 2-methyl-4-hydroxyquinoline (MHQ). MHQ is an alkyl quinolone with a previously unknown activity and is synthesized by the PqsABC enzymes. Pure MHQ is sufficient to disperse P. aeruginosa, but the dispersal activity of natural P. aeruginosa conditioned media requires additional factors. Whereas other alkyl quinolones have been shown to act as antibiotics or membrane depolarizers, MHQ lacks these activities and known antibiotics do not induce dispersal. In contrast, we show that MHQ inhibits the activity of Type IV Pili (TFP) and that TFP targeting can explain its dispersal activity. Our work thus identifies single-cell surface dispersal as a new activity of P. aeruginosa-produced small molecules, characterizes MHQ as a promising dispersal agent, and establishes TFP inhibition as a viable mechanism for P. aeruginosa dispersal.

| S-EPMC7949062 | biostudies-literature

Fluorine-free, liquid-repellent surfaces made from ionic liquid-infused nanostructured silicon.

Project description:AbstractLiquid-repellent surfaces based on slippery liquid-infused porous substrates (SLIPS) were prepared from porous, nanostructured silicon surfaces with different surface functionalization, infused with the polar ionic liquid 1-ethyl-3-methylimidazolium methylsulfate ([C2mim]MeSO4). Contrary to nonpolar SLIPS based on perfluorinated substrates and infusion liquids, [C2mim]MeSO4 forms stable SLIPS with high energy surfaces like native silicon (Si-SiO2) or ionic liquid-functionalized silicon (Si-[C3mim]Cl), whose liquid-repellent properties against low surface tension liquids (toluene, cyclohexane) were demonstrated by very low sliding angles (α < 3°) and low contact angle hysteresis (Δθ < 10°). These polar, ionic liquid-based SLIPS present a promising, environmentally benign extension of liquid-infused substrates to natural, high-energy oxide surfaces.Graphical abstract

| S-EPMC5225213 | biostudies-literature

Synthetic images aid the recognition of human-made art forgeries

Project description: Not available

| S-EPMC10866502 | biostudies-literature

Microcarriers with Synthetic Hydrogel Surfaces for Stem Cell Expansion.

Project description:Microcarriers are scalable support surfaces for cell growth that enable high levels of expansion, and are particularly relevant for expansion of human mesenchymal stem cells (hMSCs). The goal of this study is to develop a poly(ethylene glycol) (PEG)-based microcarrier coating for hMSC expansion. Commercially available microcarriers do not offer customizability of microcarrier surface properties, including elastic modulus and surface cell adhesion ligands. The lab has previously demonstrated that tuning these material properties on PEG-based hydrogels can modulate important cellular growth characteristics, such as cell attachment and expansion, which are important in microcarrier-based culture. Eosin-Y is adsorbed to polystyrene microcarriers and used as a photoinitiator for thiol-ene polymerization under visible light. Resultant PEG coatings are over 100 µm thick and localized to microcarrier surfaces. This thickness is relevant for cells to react to mechanical properties of the hydrogel coating, and coated microcarriers support hMSC attachment and expansion. hMSC expansion is highly favorable on coated microcarriers in serum-free media, with doubling times under 25 h in the growth phase, and retained osteogenic and adipogenic differentiation capacity after culture on microcarriers. These microcarriers with defined, synthetic coatings enable tailorable surfaces for cell expansion that may be suitable for a variety of biomanufacturing applications.

| S-EPMC5607626 | biostudies-literature

Quasi-liquid layers on ice crystal surfaces are made up of two different phases.

Project description:Ice plays crucially important roles in various phenomena because of its abundance on Earth. However, revealing the dynamic behavior of quasi-liquid layers (QLLs), which governs the surface properties of ice crystals at temperatures near the melting point, remains an experimental challenge. Here we show that two types of QLL phases appear that exhibit different morphologies and dynamics. We directly visualized the two types of QLLs on ice crystal surfaces by advanced optical microscopy, which can visualize the individual 0.37-nm-thick elementary steps on ice crystal surfaces. We found that they had different stabilities and different interactions with ice crystal surfaces. The two immiscible QLL phases appeared heterogeneously, moved around, and coalesced dynamically on ice crystal surfaces. This picture of surface melting is quite different from the conventional picture in which one QLL phase appears uniformly on ice crystal surfaces.

| S-EPMC3268306 | biostudies-literature

The photoreactive free radical in eumelanin.

Project description:Melanin is the primary photoprotecting pigment in humans as well as being implicated in the development of deadly melanoma. The material also conducts electricity and has thus become a bioelectronic model for proton-to-electron transduction. Central to these phenomena are its spin properties-notably two linked species derived from carbon-centered and semiquinone radicals. Using a novel in situ photoinduced electron paramagnetic resonance technique with simultaneous electrical measurements, we have elucidated for the first time the distinct photoreactivity of the two different radical species. We find that the production of the semiquinone is light- and water-driven, explaining the electrical properties and revealing biologically relevant photoreactivity.

| S-EPMC5873843 | biostudies-other

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data