Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Polyethylene Hydrogenolysis at Mild Conditions over Ruthenium on Tungstated Zirconia.

ABSTRACT: Plastics waste has become a major environmental threat, with polyethylene being one of the most produced and hardest to recycle plastics. Hydrogenolysis is potentially the most viable catalytic technology for recycling. Ruthenium (Ru) is one of the most active hydrogenolysis catalysts but yields too much methane. Here we introduce ruthenium supported on tungstated zirconia (Ru-WZr) for hydrogenolysis of low-density polyethylene (LDPE). We show that the Ru-WZr catalysts suppress methane formation and produce a product distribution in the diesel and wax/lubricant base-oil range unattainable by Ru-Zr and other Ru-supported catalysts. Importantly, the enhanced performance is showcased for real-world, single-use LDPE consumables. Reactivity studies combined with characterization and density functional theory calculations reveal that highly dispersed (WO _x )_n clusters store H as surface hydroxyls by spillover. We correlate this hydrogen storage mechanism with hydrogenation and desorption of long alkyl intermediates that would otherwise undergo further C-C scission to produce methane.

SUBMITTER: Wang C

PROVIDER: S-EPMC8479762 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Hydrogenolysis of Polyethylene and Polypropylene into Propane over Cobalt-Based Catalysts.

Project description:The development of technologies to recycle polyethylene (PE) and polypropylene (PP), globally the two most produced polymers, is critical to increase plastic circularity. Here, we show that 5 wt % cobalt supported on ZSM-5 zeolite catalyzes the solvent-free hydrogenolysis of PE and PP into propane with weight-based selectivity in the gas phase over 80 wt % after 20 h at 523 K and 40 bar H2. This catalyst significantly reduces the formation of undesired CH4 (≤5 wt %), a product which is favored when using bulk cobalt oxide or cobalt nanoparticles supported on other carriers (selectivity ≤95 wt %). The superior performance of Co/ZSM-5 is attributed to the stabilization of dispersed oxidic cobalt nanoparticles by the zeolite support, preventing further reduction to metallic species that appear to catalyze CH4 generation. While ZSM-5 is also active for propane formation at 523 K, the presence of Co promotes stability and selectivity. After optimizing the metal loading, it was demonstrated that 10 wt % Co/ZSM-5 can selectively catalyze the hydrogenolysis of low-density PE (LDPE), mixtures of LDPE and PP, as well as postconsumer PE, showcasing the effectiveness of this technology to upcycle realistic plastic waste. Cobalt supported on zeolites FAU, MOR, and BEA were also effective catalysts for C2-C4 hydrocarbon formation and revealed that the framework topology provides a handle to tune gas-phase selectivity.

| S-EPMC9597591 | biostudies-literature

Hydrogenolysis of Furfuryl Alcohol to 1,2-Pentanediol Over Supported Ruthenium Catalysts.

Project description:Hydrogenolysis of the furan rings of furfural and furfuryl alcohol, which can be obtained from biomass, has attracted attention as a method for obtaining valuable chemicals such as 1,2-pentanediol. In this study, we examined the hydrogenolysis of furfuryl alcohol to 1,2-pentanediol over Pd/C, Pt/C, Rh/C, and various supported Ru catalysts in several solvents. In particular, we investigated the effects of combinations of solvents and supports on the reaction outcome. Of all the tested combinations, Ru/MgO in water gave the best selectivity for 1,2-pentanediol: with this catalyst, 42 % selectivity for 1,2-pentanediol was achieved upon hydrogenolysis of furfuryl alcohol for 1 h at 463 K. In contrast, reaction in water in the presence of Ru/Al2 O3 afforded cyclopentanone and cyclopentanol by means of hydrogenation and rearrangement reactions.

| S-EPMC8340061 | biostudies-literature

Electronic modulation of metal-support interactions improves polypropylene hydrogenolysis over ruthenium catalysts.

Project description:Ruthenium (Ru) is the one of the most promising catalysts for polyolefin hydrogenolysis. Its performance varies widely with the support, but the reasons remain unknown. Here, we introduce a simple synthetic strategy (using ammonia as a modulator) to tune metal-support interactions and apply it to Ru deposited on titania (TiO2). We demonstrate that combining deuterium nuclear magnetic resonance spectroscopy with temperature variation and density functional theory can reveal the complex nature, binding strength, and H amount. H2 activation occurs heterolytically, leading to a hydride on Ru, an H+ on the nearest oxygen, and a partially positively charged Ru. This leads to partial reduction of TiO2 and high coverages of H for spillover, showcasing a threefold increase in hydrogenolysis rates. This result points to the key role of the surface hydrogen coverage in improving hydrogenolysis catalyst performance.

| S-EPMC9440920 | biostudies-literature

Selective hydrogenolysis of catechyl lignin into propenylcatechol over an atomically dispersed ruthenium catalyst.

Project description:C-lignin is a homo-biopolymer, being made up of caffeyl alcohol exclusively. There is significant interest in developing efficient and selective catalyst for depolymerization of C-lignin, as it represents an ideal feedstock for producing catechol derivatives. Here we report an atomically dispersed Ru catalyst, which can serve as an efficient catalyst for the hydrogenolysis of C-lignin via the cleavage of C-O bonds in benzodioxane linkages, giving catechols in high yields with TONs up to 345. A unique selectivity to propenylcatechol (77%) is obtained, which is otherwise hard to achieve, because this catalyst is capable of hydrogenolysis rather than hydrogenation. This catalyst also demonstrates good reusability in C-lignin depolymerization. Detailed investigations by model compounds concluded that the pathways involving dehydration and/or dehydrogenation reactions are incompatible routes; we deduced that caffeyl alcohol generated via concurrent C-O bonds cleavage of benzodioxane unit may act as an intermediate in the C-lignin hydrogenolysis. Current demonstration validates that atomically dispersed metals can not only catalyze small molecules reactions, but also drive the transformation of abundant and renewable biopolymer.

| S-EPMC7814062 | biostudies-literature

Effect of support acidity during selective hydrogenolysis of glycerol over supported palladium-ruthenium catalysts.

Project description:We report the role of the acidity of support during the selectivity hydrogenolysis of glycerol over supported bimetallic palladium-ruthenium (PdRu) catalysts. The PdRu nanoparticles were supported on a series of metal oxides and zeolitic supports via the modified impregnation method and tested for the liquid-phase hydrogenolysis of glycerol using gaseous hydrogen. The relative acid site densities of selected catalysts were determined by ammonia temperature-programmed desorption and pyridine desorption experiments. Based on these studies, we report a direct correlation between the catalytic activity (conversion and 1,2 propane diol yield) and two different acid sites (strong acid sites and very strong acid sites). Besides zeolite-supported catalysts, TiO2 supported PdRu nanoparticles exhibit moderate catalytic activity; however, this catalyst shows high selectivity for the desired C-O bond cleavage to produce C3 products over the undesired C-C bond cleavage to produce < C3 products. This article is part of a discussion meeting issue 'Science to enable the circular economy'.

| S-EPMC7422897 | biostudies-literature

Toward Green Production of Chewing Gum and Diet: Complete Hydrogenation of Xylose to Xylitol over Ruthenium Composite Catalysts under Mild Conditions.

Project description:Xylitol is one of the most famous chemicals known to people as the essential ingredient of chewing gum and as the sugar alternative for diabetics. Catalytic hydrogenation of biomass-derived xylose with H2 to produce high-value xylitol has been carried out under harsh reaction conditions. Herein, we exhibit the combination of Ru NPs with an environmentally benign MOF (ZIF-67) to afford a heterogeneous composite catalyst. Complete conversion of xylose with 100% selectivity to xylitol was achieved at 50°C and 1 atm H2. This is the first successful attempt to produce xylitol with ambient pressure H2 as well as the first time to achieve a 100% selectivity of xylitol for applicable catalysts. We also proved the universality of the Ru@ZIF-67 towards other hydrogenation processes. Under 1 atm H2, we achieved 100% conversion and >99% selectivity of 1-phenylethanol at 50°C for the hydrogenation of acetophenone. This is also the first report of hydrogenating acetophenone to 1-phenylethanol under 1 atm H2, which confirms that our result not only contributes to enhance the industrial yields of xylitol and reduces both the economical and energy costs but also provides new perspectives on the other hydrogenation process with H2.

| S-EPMC6944490 | biostudies-literature

Non Noble-Metal Copper-Cobalt Bimetallic Catalyst for Efficient Catalysis of the Hydrogenolysis of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran under Mild Conditions.

Project description:The efficient catalysis of the hydrogenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) over non noble-metal catalysts has received great attention in recent years. However, the reaction usually requires harsh conditions, such as high reaction temperature and excessively long reaction time, which limits the application of the non noble-metal catalysts. In this work, a bimetallic Co x -Cu@C catalyst was prepared via the pyrolysis of MOFs, and an 85% DMF yield was achieved under a reaction temperature and time of 160 °C and 3 h, respectively. The results of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDX) mapping, and other characterization techniques showed that the synthesis method in this paper realized the in situ loading of cobalt into the copper catalyst. The reaction mechanism studies revealed that the cobalt doping effectively enhanced the hydrogenation activity of the copper-based catalyst on the C-O bond at a low temperature. Moreover, the bimetallic Co x -Cu@C catalyst exhibited superior reusability without any loss in the activity when subjected to five testing rounds.

| S-EPMC8153901 | biostudies-literature

Preparation of Propanols by Glycerol Hydrogenolysis over Bifunctional Nickel-Containing Catalysts.

Project description:The paper presents the results obtained in studying glycerol hydrogenolysis into 1-propanol and 2-propanol over bifunctional Ni/WO3-TiO2 and Ni/WO3-ZrO2 catalysts in the flow system. Due to the optimal combination of acidic and hydrogenation properties of the heterogeneous catalysts, they exhibit higher performance in glycerol conversion into C3 alcohols, although the process is carried out in rather mild conditions. At the reaction temperature of 250 °C and hydrogen pressure of 3 MPa, the total yield of 1-propanol and 2-propanol reaches 95%, and the glycerol conversion is close to 100%.

| S-EPMC8001030 | biostudies-literature

Ruthenium(II)-Catalyzed Homocoupling of α-Carbonyl Sulfoxonium Ylides Under Mild Conditions: Methodology Development and Mechanistic DFT Study.

Project description:A mild ruthenium(II)-catalyzed homocoupling of α-carbonyl sulfoxonium ylides was developed and the detailed mechanism was understood based on DFT calculations in the current report. The catalytic system utilizes the α-carbonyl sulfoxonium ylide as both the directing group for ortho-sp2 C-H activation and the acylmethylating reagent for C-C coupling. Various substituents are compatible in the transformation and a variety of isocoumarin derivatives were synthesized at room temperature without any protection. The theoretical results disclosed that the full catalytic cycle contains eight elementary steps, and in all the cationic Ru(II) monomer is involved as the catalytic active species. The acid additive is responsible for protonation of the ylide carbon prior to the intramolecular nucleophilic addition and C-C bond cleavage. Interestingly, the intermediacy of free acylmethylation intermediate or its enol isomer is not necessary for the transformation.

| S-EPMC7525066 | biostudies-literature

Hydrogenation of benzoic acid derivatives over Pt/TiO<sub>2</sub> under mild conditions.

Project description:Hydrogenation of benzoic acid (BA) to cyclohexanecarboxylic acid (CCA) has important industrial and academic significance, however, the electron deficient aromatic ring and catalyst poisoning by carboxyl groups make BA hydrogenation a challenging transformation. Herein, we report that Pt/TiO2 is very effective for BA hydrogenation with, to our knowledge, a record TOF of 4490 h-1 at 80 °C and 50 bar H2, one order higher than previously reported results. Pt/TiO2 catalysts with electron-deficient and electron-enriched Pt sites are obtained by modifying the electron transfer direction between Pt and TiO2. Electron-deficient Pt sites interact with BA more strongly than electron-rich Pt sites, helping the dissociated H of the carboxyl group to participate in BA hydrogenation, thus enhancing its activity. The wide substrate scope, including bi- and tri-benzoic acids, further demonstrates the high efficiency of Pt/TiO2 for hydrogenation of BA derivatives.

| S-EPMC9814562 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data