Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A vanadium-based oxide-phosphate-pyrophosphate framework as a 4 V electrode material for K-ion batteries.

ABSTRACT: K-ion batteries (KIBs) are promising for large-scale electrical energy storage owing to the abundant resources and the electrochemical specificity of potassium. Among the positive electrode materials for KIBs, vanadium-based polyanionic materials are interesting because of their high working voltage and good structural stability which dictates the cycle life. In this study, a potassium vanadium oxide phosphate, K₆(VO)₂(V₂O₃)₂(PO₄)₄(P₂O₇), has been investigated as a 4 V class positive electrode material for non-aqueous KIBs. The material is synthesized through pyrolysis of a single metal-organic molecular precursor, K₂[(VOHPO₄)₂(C₂O₄)] at 500 °C in air. The material demonstrates a reversible extraction/insertion of 2.7 mol of potassium from/into the structure at a discharge voltage of ∼4.03 V vs. K. Operando and ex situ powder X-ray diffraction analyses reveal that the material undergoes reversible K extraction/insertion during charge/discharge via a two-phase reaction mechanism. Despite the extraction/insertion of large potassium ions, the material demonstrates an insignificant volume change of ∼1.2% during charge/discharge resulting in excellent cycling stability without capacity degradation over 100 cycles in a highly concentrated electrolyte cell. Robustness of the polyanionic framework is proved from identical XRD patterns of the pristine and cycled electrodes (after 100 cycles).

SUBMITTER: Ohara M

PROVIDER: S-EPMC8480335 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Sodium-Vanadium Bronze Na9V14O35: An Electrode Material for Na-Ion Batteries.

Project description:Na9V14O35 (η-NaxV2O5) has been synthesized via solid-state reaction in an evacuated sealed silica ampoule and tested as electroactive material for Na-ion batteries. According to powder X-ray diffraction, electron diffraction and atomic resolution scanning transmission electron microscopy, Na9V14O35 adopts a monoclinic structure consisting of layers of corner- and edge-sharing VO5 tetragonal pyramids and VO4 tetrahedra with Na cations positioned between the layers, and can be considered as sodium vanadium(IV,V) oxovanadate Na9V104.1+O19(V5+O4)4. Behavior of Na9V14O35 as a positive and negative electrode in Na half-cells was investigated by galvanostatic cycling against metallic Na, synchrotron powder X-ray diffraction and electron energy loss spectroscopy. Being charged to 4.6 V vs. Na+/Na, almost 3 Na can be extracted per Na9V14O35 formula, resulting in electrochemical capacity of ~60 mAh g-1. Upon discharge below 1 V, Na9V14O35 uptakes sodium up to Na:V = 1:1 ratio that is accompanied by drastic elongation of the separation between the layers of the VO4 tetrahedra and VO5 tetragonal pyramids and volume increase of about 31%. Below 0.25 V, the ordered layered Na9V14O35 structure transforms into a rock-salt type disordered structure and ultimately into amorphous products of a conversion reaction at 0.1 V. The discharge capacity of 490 mAh g-1 delivered at first cycle due to the conversion reaction fades with the number of charge-discharge cycles.

| S-EPMC8747075 | biostudies-literature

Sodium vanadium titanium phosphate electrode for symmetric sodium-ion batteries with high power and long lifespan.

Project description:Sodium-ion batteries operating at ambient temperature hold great promise for use in grid energy storage owing to their significant cost advantages. However, challenges remain in the development of suitable electrode materials to enable long lifespan and high rate capability. Here we report a sodium super-ionic conductor structured electrode, sodium vanadium titanium phosphate, which delivers a high specific capacity of 147 mA h g-1 at a rate of 0.1 C and excellent capacity retentions at high rates. A symmetric sodium-ion full cell demonstrates a superior rate capability with a specific capacity of about 49 mA h g-1 at 20 C rate and ultralong lifetime over 10,000 cycles. Furthermore, in situ synchrotron diffraction and X-ray absorption spectroscopy measurement are carried out to unravel the underlying sodium storage mechanism and charge compensation behaviour. Our results suggest the potential application of symmetric batteries for electrochemical energy storage given the superior rate capability and long cycle life.

| S-EPMC5493763 | biostudies-literature

Vanadium oxide nanorods as an electrode material for solid state supercapacitor.

Project description:The electrochemical properties of metal oxides are very attractive and fascinating in general, making them a potential candidate for supercapacitor application. Vanadium oxide is of particular interest because it possesses a variety of valence states and is also cost effective with low toxicity and a wide voltage window. In the present study, vanadium oxide nanorods were synthesized using a modified sol-gel technique at low temperature. Surface morphology and crystallinity studies were carried out by using scanning electron microscopy, transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy analysis. To the best of our knowledge, the as-prepared nanorods were tested with magnesium ion based polymer gel electrolyte for the first time. The prepared supercapacitor cell exhibits high capacitance values of the order of ~ 141.8 F g-1 with power density of ~ 2.3 kW kg-1 and energy density of ~ 19.1 Wh kg-1. The cells show excellent rate capability and good cycling stability.

| S-EPMC9723181 | biostudies-literature

Vanadium dioxide-zinc oxide stacked photocathodes for photo-rechargeable zinc-ion batteries.

Project description:The development of batteries that can be recharged directly by light, without the need for external solar cells or external power supplies, has recently gained interest for powering off-grid devices. Vanadium dioxide (VO2) has been studied as a promising photocathode for zinc-ion batteries because it can both store energy and harvest light. However, the efficiency of the photocharging process depends on electrode structure and charge transport layers. In this work, we report photocathodes using zinc oxide as an electron transport and hole blocking layer on top of which we synthesise VO2. The improved interface and charge separation in these photocathodes offer an improvement in photo-conversion efficiency from ∼0.18 to ∼0.51% compared to previous work on mixed VO2 photocathodes. In addition, a good capacity retention of ∼73% was observed after 500 cycles. The proposed stacked photocathodes reduce the battery light charging time by 3-fold and are therefore an important step towards making this technology more viable.

| S-EPMC8525630 | biostudies-literature

Ultralong cycle stability of aqueous zinc-ion batteries with zinc vanadium oxide cathodes.

Project description:Rechargeable aqueous zinc-ion batteries are promising candidates for large-scale energy storage but are plagued by the lack of cathode materials with both excellent rate capability and adequate cycle life span. We overcome this barrier by designing a novel hierarchically porous structure of Zn-vanadium oxide material. This Zn0.3V2O5·1.5H2O cathode delivers a high specific capacity of 426 mA·h g-1 at 0.2 A g-1 and exhibits an unprecedented superlong-term cyclic stability with a capacity retention of 96% over 20,000 cycles at 10 A g-1. Its electrochemical mechanism is elucidated. The lattice contraction induced by zinc intercalation and the expansion caused by hydronium intercalation cancel each other and allow the lattice to remain constant during charge/discharge, favoring cyclic stability. The hierarchically porous structure provides abundant contact with electrolyte, shortens ion diffusion path, and provides cushion for relieving strain generated during electrochemical processes, facilitating both fast kinetics and long-term stability.

| S-EPMC6984968 | biostudies-literature

ϵ-FeOOH: A Novel Negative Electrode Material for Li- and Na-Ion Batteries.

Project description:The demand for eco-friendly materials for secondary batteries has stimulated the exploration of a wide variety of Fe oxides, but their potential as electrode materials remains unknown. In this contribution, ϵ-FeOOH was synthesized using a high-pressure/high-temperature method and examined for the first time in nonaqueous Li and Na cells. Under a pressure of 8 GPa, α-FeOOH transformed into ϵ-FeOOH at 400 °C and then decomposed into α-Fe2O3 and H2O above 500 °C. Here, FeO6 octahedra form [2 × 1] tunnels in α-FeOOH or [1 × 1] tunnels in ϵ-FeOOH. The ϵ-FeOOH/Li cell exhibited a rechargeable capacity (Q recha) of ∼700 mA h·g-1 at 0.02-3.0 V, whereas the ϵ-FeOOH/Na cell indicated a Q recha of less than 30 mA h·g-1 at 0.02-2.7 V. The discharge and charge profiles of ϵ-FeOOH and α-FeOOH were similar, but the rate capability of ϵ-FeOOH was superior to that of α-FeOOH.

| S-EPMC7203964 | biostudies-literature

Perylenetetracarboxylic Diimide as Diffusion-Less Electrode Material for High-Rate Organic Na-Ion Batteries.

Project description:In this work 3,4,9,10-perylenetetracarboxylic diimide (PTCDI) is investigated as electrode material for organic Na-ion batteries. Since PTCDI is a widely used industrial pigment, it may turn out to be a cost-effective, abundant, and environmentally benign cathode material for secondary Na-ion batteries. Among other carbonyl pigments, PTCDI is especially interesting due to its high Na-storage capacity in combination with remarkable high rate capabilities. The detailed analysis of cyclic voltammetry measurements reveals a diffusion-less mechanism, suggesting that Na-ion storage in the PTCDI film allows for exceptionally fast charging/discharging rates. This finding is further corroborated by galvanostatic sodiation measurements at high rates of 17 C (2.3 A g-1 ), showing that 57 % of the theoretically possible capacity of PTCDI, or 78 mAh g-1 , are attained in only 3.5 min charging time.

| S-EPMC7839514 | biostudies-literature

Development of vanadium-based polyanion positive electrode active materials for high-voltage sodium-based batteries.

Project description:Polyanion compounds offer a playground for designing prospective electrode active materials for sodium-ion storage due to their structural diversity and chemical variety. Here, by combining a NaVPO4F composition and KTiOPO4-type framework via a low-temperature (e.g., 190 °C) ion-exchange synthesis approach, we develop a high-capacity and high-voltage positive electrode active material. When tested in a coin cell configuration in combination with a Na metal negative electrode and a NaPF6-based non-aqueous electrolyte solution, this cathode active material enables a discharge capacity of 136 mAh g-1 at 14.3 mA g-1 with an average cell discharge voltage of about 4.0 V. Furthermore, a specific discharge capacity of 123 mAh g-1 at 5.7 A g-1 is also reported for the same cell configuration. Through ex situ and operando structural characterizations, we also demonstrate that the reversible Na-ion storage at the positive electrode occurs mostly via a solid-solution de/insertion mechanism.

| S-EPMC9283384 | biostudies-literature

Amorphous Vanadium Oxide Thin Films as Stable Performing Cathodes of Lithium and Sodium-Ion Batteries.

Project description:Herein, we report additive- and binder-free pristine amorphous vanadium oxide (a-VOx) for Li- and Na-ion battery application. Thin films of a-VOx with a thickness of about 650 nm are grown onto stainless steel substrate from crystalline V2O5 target using pulsed laser deposition (PLD) technique. Under varying oxygen partial pressure (pO2) environment of 0, 6, 13 and 30 Pa, films bear O/V atomic ratios 0.76, 2.13, 2.25 and 2.0, respectively. The films deposited at 6‑30 Pa have a more atomic percentage of V5+ than that of V4+ with a tendency of later state increased as pO2 rises. Amorphous VOx films obtained at moderate pO2 levels are found superior to other counterparts for cathode application in Li- and Na-ion batteries with reversible capacities as high as 300 and 164 mAh g-1 at 0.1 C current rate, respectively. At the end of the 100th cycle, 90% capacity retention is noticed in both cases. The observed cycling trend suggests that more is the (V5+) stoichiometric nature of a-VOx better is the electrochemistry.

| S-EPMC6235769 | biostudies-literature

Carbon Derived from Pine Needles as a Na+-Storage Electrode Material in Dual-Ion Batteries.

Project description:Pine needles are used as the precursor material to prepare hard carbon. Scanning electron microscopy, X-ray diffraction, and N2 adsorption-desorption tests are carried out to characterize the surface, crystal, and pore structure of the material. The pine needle derived carbon (PNC) exhibits excellent Na-ion storage ability. A dual-ion battery of PNC/graphite using a Na+-based organic electrolyte is constructed. The batteries display outstanding electrochemical performance: a superior energy density (200 Wh kg-1 at 131 W kg-1), high cut-off voltage (4.7 V), and outstanding cycling stability (87.2% retention after 1000 cycles). In addition, the separate responses of the cathode and anode are investigated.

| S-EPMC6607337 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data