Browse
Submit Data
Databases
API
Help

Dataset Information

13 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Sequential storage and release of microdroplets.

ABSTRACT: Droplet microfluidic methods have opened up the possibility of studying a plethora of phenomena ranging from biological to physical or chemical processes at ultra low volumes and high throughput. A key component of such approaches is the ability to trap droplets for observation, and many device architectures for achieving this objective have been developed. A challenge with such approaches is, however, recovering the droplets following their confinement for applications involving further analysis. Here, we present a device capable of generating, confining and releasing microdroplets in a sequential manner. Through a combination of experimental and computational simulations, we shed light on the key features required for successful droplet storage and retrieval. Moreover, we explore the effect of the flow rate of the continuous phase on droplet release, determining that a critical rate is needed to ensure complete droplet deformation through constrictions holding the droplets in place prior to release. Finally, we find that once released, droplets can be retrieved and collected off chip. The ability to generate, store and sequentially release droplets renders such a device particularly promising for future applications where reactions may not only be monitored on-chip, but droplets can also be retrieved for further analysis, facilitating new exploratory avenues in the fields of analytical chemistry and biology.

SUBMITTER: Toprakcioglu Z

PROVIDER: S-EPMC8481565 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Stability models for sequential storage.

Project description:Some drugs are intended for sequential storage under two different storage conditions. If the data for each condition are analyzed separately, predicting assay and other responses after T1 months at one condition followed by T2 months at the other condition is non-trivial for several reasons. First, the two analyses will give different intercept terms. What should one do about that? Second, how would one calculate the confidence limits for combined storage? Third, what if prior storage at one condition affects the slope at the other condition? This paper proposes a simple ANCOVA model containing two slope terms, one for each storage condition. When multiple batches and/or packages are involved, it is easily generalized to two sets of slope terms. Confidence limits are straightforward and can be calculated using existing commercial software. With properly designed data, one can test whether prior storage at one condition affects the slope at the other condition. If no such effect is significant, very useful extrapolations can be made. Temperature excursions, model reduction and curvilinear dependencies are discussed.

| S-EPMC3066345 | biostudies-literature

Single-molecule DNA sequencing of widely varying GC-content using nucleotide release, capture and detection in microdroplets.

Project description:Despite remarkable progress in DNA sequencing technologies there remains a trade-off between short-read platforms, having limited ability to sequence homopolymers, repeated motifs or long-range structural variation, and long-read platforms, which tend to have lower accuracy and/or throughput. Moreover, current methods do not allow direct readout of epigenetic modifications from a single read. With the aim of addressing these limitations, we have developed an optical electrowetting sequencing platform that uses step-wise nucleotide triphosphate (dNTP) release, capture and detection in microdroplets from single DNA molecules. Each microdroplet serves as a reaction vessel that identifies an individual dNTP based on a robust fluorescence signal, with the detection chemistry extended to enable detection of 5-methylcytosine. Our platform uses small reagent volumes and inexpensive equipment, paving the way to cost-effective single-molecule DNA sequencing, capable of handling widely varying GC-bias, and demonstrating direct detection of epigenetic modifications.

| S-EPMC7736801 | biostudies-literature

Electrotunable liquid sulfur microdroplets.

Project description:Manipulating liquids with tunable shape and optical functionalities in real time is important for electroactive flow devices and optoelectronic devices, but remains a great challenge. Here, we demonstrate electrotunable liquid sulfur microdroplets in an electrochemical cell. We observe electrowetting and merging of sulfur droplets under different potentiostatic conditions, and successfully control these processes via selective design of sulfiphilic/sulfiphobic substrates. Moreover, we employ the electrowetting phenomena to create a microlens based on the liquid sulfur microdroplets and tune its characteristics in real time through changing the shape of the liquid microdroplets in a fast, repeatable, and controlled manner. These studies demonstrate a powerful in situ optical battery platform for unraveling the complex reaction mechanism of sulfur chemistries and for exploring the rich material properties of the liquid sulfur, which shed light on the applications of liquid sulfur droplets in devices such as microlenses, and potentially other electrotunable and optoelectronic devices.

| S-EPMC6992759 | biostudies-literature

Sequential release of nanoparticle payloads from ultrasonically burstable capsules.

Project description:In many biomedical contexts ranging from chemotherapy to tissue engineering, it is beneficial to sequentially present bioactive payloads. Explicit control over the timing and dose of these presentations is highly desirable. Here, we present a capsule-based delivery system capable of rapidly releasing multiple payloads in response to ultrasonic signals. In vitro, these alginate capsules exhibited excellent payload retention for up to 1 week when unstimulated and delivered their entire payloads when ultrasonically stimulated for 10-100 s. Shorter exposures (10 s) were required to trigger delivery from capsules embedded in hydrogels placed in a tissue model and did not result in tissue heating or death of encapsulated cells. Different types of capsules were tuned to rupture in response to different ultrasonic stimuli, thus permitting the sequential, on-demand delivery of nanoparticle payloads. As a proof of concept, gold nanoparticles were decorated with bone morphogenetic protein-2 to demonstrate the potential bioactivity of nanoparticle payloads. These nanoparticles were not cytotoxic and induced an osteogenic response in mouse mesenchymal stem cells. This system may enable researchers and physicians to remotely regulate the timing, dose, and sequence of drug delivery on-demand, with a wide range of clinical applications ranging from tissue engineering to cancer treatment.

| S-EPMC4685712 | biostudies-literature

Sequential Payload Release from Acoustically-Responsive Scaffolds Using Focused Ultrasound.

Project description:Regenerative processes, such as angiogenesis and osteogenesis, often require multiple growth factors with distinct spatiotemporal patterns and expression sequences. Within tissue engineering, hydrogel scaffolds are commonly used for exogenous growth factor delivery. However, direct incorporation of growth factors within conventional hydrogels does not afford spatiotemporally controlled delivery because release is governed by passive mechanisms that cannot be actively controlled after the scaffold is implanted. We have developed acoustically-responsive scaffolds (ARSs), which are fibrin scaffolds doped with payload-containing, sonosensitive emulsions. Payload release from ARSs can be controlled non-invasively and on demand using focused, megahertz-range ultrasound. In the in vitro study described here, we developed and characterized ARSs that enable sequential release of two surrogate, fluorescent payloads using consecutive ultrasound exposures at different acoustic pressures. ARSs were generated with various combinations and volume fractions of perfluoropentane, perfluorohexane, and perfluoroheptane emulsions. Acoustic droplet vaporization and inertial cavitation thresholds correlated with the boiling point/molecular weight of the perfluorocarbon while payload release correlated inversely. Payload release was longitudinally measured and observed to follow a sigmoidal trend versus acoustic pressure. Perfluoropentane and perfluorohexane emulsions were stabilized when incorporated into ARSs with perfluoroheptane emulsion. These results highlight the potential of using ARSs for sequential, dual-payload release for tissue regeneration.

| S-EPMC6441330 | biostudies-literature

RNA-seq of coacervate microdroplets

Project description:mRNA content of diverse coacervate and condensate microdroplets was sequenced. The following coacervate / condensate types were generated: - PDDA/CM-Dex (ool17, ool18) - Lys/CM-Dex (ool9, ool12) - FUS (ool22) - Dhh1 (ool24_2)

2022-02-28 | E-MTAB-11348 | biostudies-arrayexpress

Facile storage and release of white phosphorus and yellow arsenic.

Project description:The storage of metastable compounds and modifications of elements are of great interest for synthesis and other, e.g., semiconductor, applications. Whereas white phosphorus is a metastable modification that can be stored under certain conditions, storage of the extremely (light- and air-)sensitive form of arsenic, yellow arsenic, is a challenge rarely tackled so far. Herein, we report on the facile storage and release of these tetrahedral E4 molecules (E = P, As) using activated carbon as a porous storage material. These loaded materials are air- and light-stable and have been comprehensively characterized by solid-state 31P{1H} MAS NMR spectroscopy, powder X-ray diffraction analysis, nitrogen adsorption measurements, and thermogravimetric analysis. Additionally, we show that these materials can be used as a suitable E4 source for releasing intact white phosphorus or yellow arsenic, enabling subsequent reactions in solution. Because the uptake and release of E4 are reversible, these materials are excellent carriers of these highly reactive modifications.

| S-EPMC5783940 | biostudies-literature

Ordered and kinetically discrete sequential protein release from biodegradable thin films.

Project description:Multidrug regimens can sometimes treat recalcitrant diseases when single-drug therapies fail. Recapitulating complex multidrug administration from controlled release films for localized delivery remains challenging because their release kinetics are frequently intertwined, and an initial burst release of each drug is usually uncontrollable. Kinetic control over protein release is demonstrated by cross-linking layer-by-layer films during the assembly process. We used biodegradable and naturally derived components and relied on copper-free click chemistry for bioorthogonal covalent cross-links throughout the film that entrap but do not modify the embedded protein. We found that this strategy restricted the interdiffusion of protein while maintaining its activity. By depositing a barrier layer and a second protein-containing layer atop this construct, we generated well-defined sequential protein release with minimal overlap that follows their spatial distribution within the film.

| S-EPMC4387866 | biostudies-literature

Sequential intracellular release of water-soluble cargos from Shell-crosslinked polymersomes.

Project description:Polymer vesicles, i.e. polymersomes (PS), present unique nanostructures with an interior aqueous core that can encapsulate multiple independent cargos concurrently. However, the sequential release of such co-loaded actives remains a challenge. Here, we report the rational design and synthesis of oxidation-responsive shell-crosslinked PS with capability for the controlled, sequential release of encapsulated hydrophilic molecules and hydrogels. Amphiphilic brush block copolymers poly(oligo(ethylene glycol) methyl ether methacrylate)-b-poly(oligo(propylene sulfide) methacrylate) (POEGMA-POPSMA) were prepared to fabricate PS via self-assembly in aqueous solution. As a type of unique drug delivery vehicle, the interior of the PS was co-loaded with hydrophilic molecules and water-soluble poly(N-isopropylacrylamide) (PNIPAM) conjugates. Due to the thermosensitivity of PNIPAM, PNIPAM conjugates within the PS aqueous interior underwent a phase transition to form hydrogels in situ when the temperature was raised above the lower critical solution temperature (LCST) of PNIPAM. Via control of the overall shell permeability by oxidation, we realized the sequential release of two water-soluble payloads based on the assumption that hydrogels have much smaller membrane permeability than that of molecular cargos. The ability to control the timing of release of molecular dyes and PNIPAM-based hydrogels was also observed within live cells. Furthermore, leakage of hydrogels from the PS was effectively alleviated in comparison to molecular cargos, which would facilitate intracellular accumulation and prolonged retention of hydrogels within the cell cytoplasm. Thus, we demonstrate that the integration of responsive hydrogels into PS with crosslinkable membranes provides a facile and versatile technique to control the stability and release of water-soluble cargos for drug delivery purposes.

| S-EPMC6008218 | biostudies-literature

External control of reactions in microdroplets.

Project description:Scale reduction of chemical reactions enables novel screening and synthesis approaches that facilitate a highly parallelized and combinatorial exploration of chemical space. Droplet-based microfluidics have evolved as a powerful platform to allow many chemical reactions within small volumes that each can be controlled and manipulated. A significant technical challenge is the ability to change the concentration of reactants inside a droplet. Here we describe a strategy that relies on the use of reactants that are soluble in both oil and water and allow a passive, diffusive exchange of reactants between the oil and aqueous phases to externally control composition of the droplets. We demonstrate the applicability of our approach by externally changing the pH inside microdroplets without the need for physical manipulation or droplet merging.

| S-EPMC4488745 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data