Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Mesoporous onion-like carbon nanostructures from natural oil for high-performance supercapacitor and electrochemical sensing applications: Insights into the post-synthesis sonochemical treatment on the electrochemical performance.

ABSTRACT: Although onion-like carbon nanostructures (OLCs) are attractive materials for energy storage, their commercialization is hampered by the absence of a simple, cost-effective, large-scale synthesis route and binder-free electrode processing. The present study employs a scalable and straightforward technique to fabricate sonochemically tailored OLCs-based high-performance supercapacitor electrode material. An enhanced supercapacitive performance was demonstrated by the OLCs when sonicated in DMF at 60 °C for 15 min, with a specific capacitance of 647 F/g, capacitance retention of 97% for 5000 cycles, and a charge transfer resistance of 3 Ω. Furthermore, the OLCs were employed in the electrochemical quantification of methylene blue, a potential COVID-19 drug. The sensor demonstrated excellent analytical characteristics, including a linear range of 100 pM to 1000 pM, an ultralow sensitivity of 64.23 pM, and a high selectivity. When used to identify and quantify methylene blue in its pharmaceutical formulation, the sensor demonstrated excellent reproducibility, high stability, and satisfactory recovery.

SUBMITTER: Ramya AV

PROVIDER: S-EPMC8482498 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Facile Synthesis of SnS2 Nanostructures with Different Morphologies for High-Performance Supercapacitor Applications.

Project description:SnS2 is an emerging candidate for an electrode material because of the considerable interlayer spaces in its crystal structures and the large surface area. SnS2 as a photocatalyst and in lithium ion batteries has been reported. On the other hand, there are only a few reports of their supercapacitor applications. In this study, sheetlike SnS2 (SL-SnS2), flowerlike SnS2 (FL-SnS2), and ellipsoid-like SnS2 (EL-SnS2) were fabricated via a facile solvothermal route using different types of solvents. The results suggested that the FL-SnS2 exhibited better capacitive performance than the SL-SnS2 and EL-SnS2, which means that the morphology has a significant effect on the electrochemical reaction. The FL-SnS2 displayed higher supercapacitor performance with a high capacity of approximately ∼431.82 F/g at a current density of 1 A/g. The remarkable electrochemical performance of the FL-SnS2 could be attributed to the large specific surface area and better average pore size. These results suggest that a suitable solvent is appropriate for the large-scale construction of SnS2 with different morphologies and also has huge potential in the practical applications of high-performance supercapacitors.

| S-EPMC6641318 | biostudies-literature

Morphology and property control of NiO nanostructures for supercapacitor applications.

Project description:We process one-dimensional (1D) NiO nanostructures in anodized alumina templates starting from electrochemically deposited Ni nanotubes (NTs), and characterize their morphology-dependent supercapacitance behavior. The morphology of the 1D NiO nanostructures is controlled by the time of annealing at 450°C. After 25 min of annealing, the NTs start to close but maintain the tubular structure, and after a further 300 min of annealing time, the tubes are completely closed and nanorods (NRs) are formed. We show that the structures obtained are highly promising for supercapacitor applications; the performance of the NiO NT structure is with a specific capacitance of 2,093 F/g, the highest ever obtained for NiO, approaching the theoretical capacitance of this material. A suitable combination of nanocrystalline grain size and the high surface area akin to the tubular structure is responsible for this high performance. In contrast, the NiO NR structure is characterized by lower performance (797 F/g). A further attribute of the proposed structure is its high stability against galvanostatic charging-discharging cycling at high current densities, with almost no alteration to performance after 500 cycles.

| S-EPMC3765375 | biostudies-other

Two-Dimensional VO2 Mesoporous Microarrays for High-Performance Supercapacitor.

Project description:Two-dimensional (2D) mesoporous VO2 microarrays have been prepared using an organic-inorganic liquid interface. The units of microarrays consist of needle-like VO2 particles with a mesoporous structure, in which crack-like pores with a pore size of about 2 nm and depth of 20-100 nm are distributed on the particle surface. The liquid interface acts as a template for the formation of the 2D microarrays, as identified from the kinetic observation. Due to the mesoporous structure of the units and high conductivity of the microarray, such 2D VO2 microarrays exhibit a high specific capacitance of 265 F/g at 1 A/g and excellent rate capability (182 F/g at 10 A/g) and cycling stability, suggesting the effect of unique microstructure for improving the electrochemical performance.

| S-EPMC5940969 | biostudies-literature

Three-dimensional nickel vanadium layered double hydroxide nanostructures grown on carbon cloth for high-performance flexible supercapacitor applications.

Project description:This study reports the synthesis of ultrathin Ni-V layered double hydroxide nanosheets on carbon cloth (NVL@CC) through adopting a facile and cost-effective method for flexible supercapacitor applications. The as-synthesized NVL@CC possesses a uniform, mechanically strong and highly ordered porous network with connected pores, ensuring high specific capacitance and enhanced cyclability. A high specific capacity of 1226 C g-1 (2790 F g-1) was obtained at 1 A g-1, and it remained at 430 C g-1 (1122 F g-1) even at a higher current density of 10 A g-1. A hybrid supercapacitor (HSC) was assembled with the NVL@CC electrode as the positive electrode and activated carbon coated carbon cloth as the negative electrode (NVL@CC//AC HSC). The devices showed an excellent energy density of 0.69 mW h cm-3 at a power density of 2.5 mW cm-3 with 100% of the original capacitance being retained at a current density of 5 mA cm-2. Furthermore, the devices exhibited an energy density of 0.24 mW h cm-3 even at a higher power density of 214.4 mW cm-3, surpassing the performances observed for many recently reported flexible supercapacitors. Importantly, the electrochemical performance of the solid-state flexible supercapacitors showed a negligible change upon bending and twisting of the devices. The devices showed no decay in specific capacitance and coulombic efficiency up to 5000 charge-discharge cycles, confirming the excellent cycle life of the HSC device. The performance of NVL@CC indicates the great potential of the material for future flexible energy storage devices.

| S-EPMC9419287 | biostudies-literature

Polarization invariant plasmonic nanostructures for sensing applications.

Project description:Optics-based sensing platform working under unpolarized light illumination is of practical importance in the sensing applications. For this reason, sensing platforms based on localized surface plasmons are preferred to their integrated optics counterparts for their simple mode excitation and inexpensive implementation. However, their optical response under unpolarized light excitation is typically weak due to their strong polarization dependence. Herein, the role of rotational symmetry for realizing robust sensing platform exhibiting strong optical contrast and high sensitivity is explored. Specifically, gammadion and star-shaped gold nanostructures with different internal and external rotational symmetries are fabricated and studied in detail, from which their mode characteristics are demonstrated as superposition of their constituent longitudinal plasmons that are in conductive coupling with each other. We demonstrate that introducing and increasing internal rotational symmetry would lead to the enhancement in optical contrast up to ~3x under unpolarized light illumination. Finally, we compare the sensing performances of rotationally symmetric gold nanostructures with a more rigorous figure-of-merit based on sensitivity, Q-factor, and spectral contrast.

| S-EPMC5548906 | biostudies-literature

Enhanced electrochemical performance of nanoplate nickel cobaltite (NiCo2O4) supercapacitor applications.

Project description:Well-ordered, unique interconnected nanostructured binary metal oxides with lightweight, free-standing, and highly flexible nickel foam substrate electrodes have attracted tremendous research attention for high performance supercapacitor applications owing to the combination of the improved electrical conductivity and highly efficient electron and ion transport channels. In this study, a unique interconnected nanoplate-like nickel cobaltite (NiCo2O4) nanostructure was synthesized on highly conductive nickel foam and its use as a binder-free material in energy storage applications was assessed. The nanoplate-like NiCo2O4 nanostructure electrode was prepared by a simple chemical bath deposition method under optimized conditions. The NiCo2O4 electrode delivered an outstanding specific capacitance of 2791 F g-1 at a current density of 5 A g-1 in a KOH electrolyte in a three-electrode system as well as outstanding cycling stability with 99.1% retention after 3000 cycles at a current density of 7 A g-1. The as-synthesized NiCo2O4 electrode had a maximum energy density of 63.8 W h kg-1 and exhibited an outstanding high power density of approximately 654 W h kg-1. This paper reports a simple and cost-effective process for the synthesis of flexible high performance devices that may inspire new ideas for energy storage applications.

| S-EPMC9059483 | biostudies-literature

Self-Assembled 3D Flower-Like Nickel Hydroxide Nanostructures and Their Supercapacitor Applications.

Project description:Three-dimensional (3D) nanostructures have attracted considerable attention because of their high surface areas and unique properties which gives outstanding performance in catalysis and energy storage applications. This paper proposes the growth mechanism of 3D flower-like β-Ni(OH)2 constructed through a two dimensional sheet framework using a one-step oleylamine-assisted solvothermal approach, where oleylamine acts as the surfactant, co-solvent, stabilizer, and reducing agent. A detailed examination of the product morphology after various reaction times suggested that the self-assembly of flower occurs through a mechanism involving nucleation, Ostwald ripening, and recrystallization. The associated characterization revealed it to be pure β-Ni(OH)2 without any sign of contamination. The effect of the morphology (sheet to 3D flower-like β-Ni(OH)2) on the electrochemical supercapacitive behavior was assessed by cyclic voltammetry and galvanostatic charge-discharge tests. The results showed that 3D flower-like β-Ni(OH)2 exhibited better specific capacitance of ~1567 F g(-1) at a current density of 1 A g(-1) and retained ~25% capacitance at a high current density of 10 A g(-1) compared to the other reference materials. The superior electrochemical properties of the 3D flower-like β-Ni(OH)2 originate from their large specific surface area and unique structure.

| S-EPMC4890008 | biostudies-other

Three-dimensional N-doped mesoporous carbon-MXene hybrid architecture for supercapacitor applications.

Project description:Hierarchical heterostructures of mesoporous carbon wrapped around MXene nanolayers, which combine a porous skeleton, two-dimensional nanosheet morphology, and hybrid characteristics, have attracted research attention as electrode materials for energy storage systems. Nevertheless, it remains a significant challenge to fabricate such structures due to a lack of control of material morphology with high pore accessibility for the mesostructured carbon layers. As a proof of concept, I report a novel layer-by-layer N-doped mesoporous carbon (NMC)MXene heterostructure through the interfacial self-assembly of exfoliated MXene nanosheets and block copolymer P123/melamine-formaldehyde resin micelles with subsequent calcination treatment. The incorporation of MXene layers in the carbon matrix not only creates a spacer to inhibit the MXene sheet restacking and high specific surface area, but it also renders composites with good conductivity and additional pseudo capacitance. The as-prepared electrode with NMC and MXene exhibits outstanding electrochemical performance, with a gravimetric capacitance of 393 F g-1 at 1 A g-1 in an aqueous electrolyte and remarkable cycling stability. More importantly, the proposed synthesis strategy highlights the benefit of using MXene as a buttress for organizing mesoporous carbon in novel architectures with the potential for energy storage application.

| S-EPMC10052559 | biostudies-literature

Synthesis and Supercapacitor Performance of Polyaniline/Nitrogen-Doped Ordered Mesoporous Carbon Composites.

Project description:The electrochemical property of ordered mesoporous carbon (OMC) can be changed significantly due to the incorporating of electron-donating heteroatoms into OMC. Here, we demonstrate the successful fabrication of nitrogen-doped ordered mesoporous carbon (NOMC) materials to be used as carbon substrates for loading polyaniline (PANI) by in situ polymerization. Compared with NOMC, the PANI/NOMC prepared with a different mass ratio of PANI and NOMC exhibits remarkably higher electrochemical specific capacitance. In a typical three-electrode configuration, the hybrid has a specific capacitance about 276.1 F/g at 0.2 A/g with a specific energy density about 38.4 Wh/kg. What is more, the energy density decreases very slowly with power density increasing, which is a different phenomenon from other reports. PANI/NOMC materials exhibit good rate performance and long cycle stability in alkaline electrolyte (~ 80% after 5000 cycles). The fabrication of PANI/NOMC with enhanced electrochemical properties provides a feasible route for promoting its applications in supercapacitors.

| S-EPMC5968012 | biostudies-literature

High-performance freestanding supercapacitor electrode based on polypyrrole coated nickel cobalt sulfide nanostructures.

Project description:In the present work, we report the successful fabrication of dandelion-like Nickel-Cobalt Sulfide@Polypyrrole microspheres through the hydrothermal method and its possible application as a binder-free electrode in supercapacitors. This electrode exhibited low charge transfer resistance with a remarkable specific capacitance of 2554.9 F g-1 at 2.54 A g-1, in addition to considerable cycle life stability. Also, an asymmetric device was prepared using NiCo2S4@PPy/NF as positive and rGO/NF as negative electrodes. This asymmetric supercapacitor exhibited a specific capacitance of 98.9 F g-1 at 1.84 A g-1 and delivered an energy density of 35.17 Wh kg-1 at a power density of 1472 W kg-1. Such a remarkable performance can be originated from the synergy effect of NiCo2S4 and PPy and the direct deposition of the composite on the current collector. Our findings suggest the dandelion-like NiCo2S4@PPy as a promising material for making high-performance supercapacitors.

| S-EPMC8930993 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data