Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Honeycomb Boron on Al(111): From the Concept of Borophene to the Two-Dimensional Boride.

ABSTRACT: A great variety of two-dimensional (2D) boron allotropes (borophenes) were extensively studied in the past decade in the quest for graphene-like materials with potential for advanced technological applications. Among them, the 2D honeycomb boron is of specific interest as a structural analogue of graphene. Recently it has been synthesized on the Al(111) substrate; however it remains unknown to what extent does honeycomb boron behave like graphene. Here we elucidate the structural and electronic properties of this unusual 2D material with a combination of core-level X-ray spectroscopies, scanning tunneling microscopy, and DFT calculations. We demonstrate that in contrast to graphene on lattice-mismatched metal surfaces, honeycomb boron cannot wiggle like a blanket on Al(111), but rather induces reconstruction of the top metal layer, forming a stoichiometric AlB₂ sheet on top of Al. Our conclusions from theoretical modeling are fully supported by X-ray absorption spectra showing strong similarity in the electronic structure of honeycomb boron on Al(111) and thick AlB₂ films. On the other hand, a clear separation of the electronic states of the honeycomb boron into π- and σ-subsystems indicates an essentially 2D nature of the electronic system in both one-layer AlB₂ and bulk AlB₂.

SUBMITTER: Preobrajenski AB

PROVIDER: S-EPMC8482755 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Two-Dimensional Binary Honeycomb Layer Formed by Ag and Te on Ag(111).

Project description:Inspired by the unique properties of graphene, research efforts have broadened to investigations of various other two-dimensional materials with the aim of exploring their properties for future applications. Our combined experimental and theoretical study confirms the existence of a binary honeycomb structure formed by Ag and Te on Ag(111). Low-energy electron diffraction shows sharp spots which provide evidence of an undistorted AgTe layer. Band structure data obtained by angle-resolved photoelectron spectroscopy are closely reproduced by first-principles calculations, using density functional theory (DFT). This confirms the formation of a honeycomb structure with one Ag and one Te atom in the unit cell. In addition, the theoretical band structure reproduces also the finer details of the experimental bands, such as a split of one of the AgTe bands.

| S-EPMC7343276 | biostudies-literature

From boron cluster to two-dimensional boron sheet on Cu(111) surface: growth mechanism and hole formation.

Project description:As attractive analogue of graphene, boron monolayers have been theoretically predicted. However, due to electron deficiency of boron atom, synthesizing boron monolayer is very challenging in experiments. Using first-principles calculations, we explore stability and growth mechanism of various boron sheets on Cu(111) substrate. The monotonic decrease of formation energy of boron cluster B(N) with increasing cluster size and low diffusion barrier for a single B atom on Cu(111) surface ensure continuous growth of two-dimensional (2D) boron cluster. During growth process, hexagonal holes can easily arise at the edge of a 2D triangular boron cluster and then diffuse entad. Hence, large-scale boron monolayer with mixed hexagonal-triangular geometry can be obtained via either depositing boron atoms directly on Cu(111) surface or soft landing of small planar BN clusters. Our theoretical predictions would stimulate further experiments of synthesizing boron sheets on metal substrates and thus enrich the variety of 2D monolayer materials.

| S-EPMC3831238 | biostudies-literature

Reversible Hydrogen Storage in Metal-Decorated Honeycomb Borophene Oxide.

Project description:Two-dimensional (2D) boron-based materials are receiving much attention as H2 storage media due to the low atomic mass of boron and the stability of decorating alkali metals on the surface, which enhance interactions with H2. This work investigates the suitability of Li, Na, and K decorations on 2D honeycomb borophene oxide (B2O) for H2 storage, using dispersion corrected density functional theory (DFT-D2). A high theoretical gravimetric density of 8.3 wt % H2 is achieved for the Li-decorated B2O structure. At saturation, each Li binds to two H2 with an average binding energy of -0.24 eV/H2. Born-Oppenheimer molecular dynamics simulations at temperatures of 100, 300, and 500 K demonstrate the stability of the Li-decorated structure and the H2 desorption behavior at different temperatures. Our findings indicate that Li-decorated 2D B2O is a promising material for reversible H2 storage and recommend experimental investigation of 2D B2O as a potential H2 storage medium.

| S-EPMC8447184 | biostudies-literature

Two-Dimensional Band Structure in Honeycomb Metal-Organic Frameworks.

Project description:Two-dimensional (2D) metal-organic frameworks (MOFs) have been recently proposed as a flexible material platform for realizing exotic quantum phases including topological and anomalous quantum Hall insulators. Experimentally, direct synthesis of 2D MOFs has been essentially confined to metal substrates, where the strong interaction with the substrate masks the intrinsic electronic properties of the MOF. In addition to electronic decoupling from the underlying metal support, synthesis on weakly interacting substrates (e.g., graphene) would enable direct realization of heterostructures of 2D MOFs with inorganic 2D materials. Here, we demonstrate synthesis of 2D honeycomb MOFs on epitaxial graphene substrate. Using low-temperature scanning tunneling microscopy (STM) and atomic force microscopy (AFM) complemented by density-functional theory (DFT) calculations, we show the formation of a 2D band structure in the MOF decoupled from the substrate. These results open the experimental path toward MOF-based designer electronic materials with complex, engineered electronic structures.

| S-EPMC6179349 | biostudies-literature

Two-dimensional topological superconductivity in Pb/Co/Si(111).

Project description:Just like insulators can present topological phases characterized by Dirac edge states, superconductors can exhibit topological phases characterized by Majorana edge states. In particular, one-dimensional topological superconductors are predicted to host zero-energy Majorana fermions at their extremities. By contrast, two-dimensional superconductors have a one-dimensional boundary which would naturally lead to propagating Majorana edge states characterized by a Dirac-like dispersion. In this paper we present evidences of one-dimensional dispersive in-gap edge states surrounding a two-dimensional topological superconducting domain consisting of a monolayer of Pb covering magnetic Co-Si islands grown on Si(111). We interpret the measured dispersive in-gap states as a spatial topological transition with a gap closure. Our method could in principle be generalized to a large variety of heterostructures combining a Rashba superconductor with a magnetic layer in order to be used as a platform for engineering topological quantum phases.

| S-EPMC5725560 | biostudies-literature

Candidate quantum spin liquid due to dimensional reduction of a two-dimensional honeycomb lattice.

Project description:As with quantum spin liquids based on two-dimensional triangular and kagome lattices, the two-dimensional honeycomb lattice with either a strong spin-orbital coupling or a frustrating second-nearest-neighbor coupling is expected to be a source of candidate quantum spin liquids. An ammonium salt [(C3H7)3NH]2[Cu2(C2O4)3](H2O)2.2 containing hexagonal layers of Cu(2+) was obtained from solution. No structural transition or long-range magnetic ordering was observed from 290 K to 2 K from single crystal X-ray diffraction, specific heat and susceptibility measurements. The anionic layers are separated by sheets of ammonium and H2O with distance of 3.5 Å and no significant interaction between anionic layers. The two-dimensional honeycomb lattice is constructed from Jahn-Teller distorted Cu(2+) and oxalate anions, showing a strong antiferromagnetic interaction between S = 1/2 metal atoms with θ = -120 (1) K. Orbital analysis of the Cu(2+) interactions through the oxalate-bridges suggests a stripe mode pattern of coupling with weak ferromagnetic interaction along the b axis, and strong antiferromagnetic interaction along the a axis. Analysis of the magnetic susceptibility shows that it is dominated by a quasi-one-dimensional contribution with spin chains that are at least as well isolated as those of well-known quasi-one-dimensional spin liquids.

| S-EPMC5377320 | biostudies-literature

Synthesis of borophenes: Anisotropic, two-dimensional boron polymorphs.

Project description:At the atomic-cluster scale, pure boron is markedly similar to carbon, forming simple planar molecules and cage-like fullerenes. Theoretical studies predict that two-dimensional (2D) boron sheets will adopt an atomic configuration similar to that of boron atomic clusters. We synthesized atomically thin, crystalline 2D boron sheets (i.e., borophene) on silver surfaces under ultrahigh-vacuum conditions. Atomic-scale characterization, supported by theoretical calculations, revealed structures reminiscent of fused boron clusters with multiple scales of anisotropic, out-of-plane buckling. Unlike bulk boron allotropes, borophene shows metallic characteristics that are consistent with predictions of a highly anisotropic, 2D metal.

| S-EPMC4922135 | biostudies-literature

Two-dimensional honeycomb network through sequence-controlled self-assembly of oligopeptides.

Project description:The sequence of a peptide programs its self-assembly and hence the expression of specific properties through non-covalent interactions. A large variety of peptide nanostructures has been designed employing different aspects of these non-covalent interactions, such as dispersive interactions, hydrogen bonding or ionic interactions. Here we demonstrate the sequence-controlled fabrication of molecular nanostructures using peptides as bio-organic building blocks for two-dimensional (2D) self-assembly. Scanning tunnelling microscopy reveals changes from compact or linear assemblies (angiotensin I) to long-range ordered, chiral honeycomb networks (angiotensin II) as a result of removal of steric hindrance by sequence modification. Guided by our observations, molecular dynamic simulations yield atomistic models for the elucidation of interpeptide-binding motifs. This new approach to 2D self-assembly on surfaces grants insight at the atomic level that will enable the use of oligo- and polypeptides as large, multi-functional bio-organic building blocks, and opens a new route towards rationally designed, bio-inspired surfaces.

| S-EPMC4729956 | biostudies-literature

Two-Dimensional Iron Tungstate: A Ternary Oxide Layer With Honeycomb Geometry.

Project description:The exceptional physical properties of graphene have sparked tremendous interests toward two-dimensional (2D) materials with honeycomb structure. We report here the successful fabrication of 2D iron tungstate (FeWO x ) layers with honeycomb geometry on a Pt(111) surface, using the solid-state reaction of (WO3)3 clusters with a FeO(111) monolayer on Pt(111). The formation process and the atomic structure of two commensurate FeWO x phases, with (2 × 2) and (6 × 6) periodicities, have been characterized experimentally by combination of scanning tunneling microscopy (STM), low-energy electron diffraction (LEED), X-ray photoelectron spectroscopy (XPS), and temperature-programmed desorption (TPD) and understood theoretically by density functional theory (DFT) modeling. The thermodynamically most stable (2 × 2) phase has a formal FeWO3 stoichiometry and corresponds to a buckled Fe2+/W4+ layer arranged in a honeycomb lattice, terminated by oxygen atoms in Fe-W bridging positions. This 2D FeWO3 layer has a novel structure and stoichiometry and has no analogues to known bulk iron tungstate phases. It is theoretically predicted to exhibit a ferromagnetic electronic ground state with a Curie temperature of 95 K, as opposed to the antiferromagnetic behavior of bulk FeWO4 materials.

| S-EPMC4838946 | biostudies-literature

Two-Dimensional Ketone-Driven Metal-Organic Coordination on Cu(111).

Project description:Two-dimensional metal-organic nanostructures based on the binding of ketone groups and metal atoms were fabricated by depositing pyrene-4,5,9,10-tetraone (PTO) molecules on a Cu(111) surface. The strongly electronegative ketone moieties bind to either copper adatoms from the substrate or codeposited iron atoms. In the former case, scanning tunnelling microscopy images reveal the development of an extended metal-organic supramolecular structure. Each copper adatom coordinates to two ketone ligands of two neighbouring PTO molecules, forming chains that are linked together into large islands through secondary van der Waals interactions. Deposition of iron atoms leads to a transformation of this assembly resulting from the substitution of the metal centres. Density functional theory calculations reveal that the driving force for the metal substitution is primarily determined by the strength of the ketone-metal bond, which is higher for Fe than for Cu. This second class of nanostructures displays a structural dependence on the rate of iron deposition.

| S-EPMC5074249 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data