Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Characterization of Photochromic Dye Solar Cells Using Small-Signal Perturbation Techniques.

ABSTRACT: Photochromic dye-sensitized solar cells (DSSCs) are novel semi-transparent photovoltaic devices that self-adjust their optical properties to the irradiation conditions, a feature that makes them especially suitable for building integrated photovoltaics. These novel solar cells have already achieved efficiencies above 4%, and there are multiple pathways to improve the performance. In this work, we conduct a full characterization of DSSCs with the photochromic dye NPI, combining electrical impedance spectroscopy (EIS) and intensity-modulated photocurrent spectroscopy (IMPS). We argue that the inherent properties of the photochromic dye, which result in a modification of the functioning of the solar cell by the optical excitation that also acts as a probe, pose unique challenges to the interpretation of the results using conventional models. Absorption of light in the visible range significantly increases when the NPI dye is in the activated state; however, the recombination rate also increases, thus limiting the efficiency. We identify and quantify the mechanism of enhanced recombination when the photochromic dye is activated using a combination of EIS and IMPS. From the comparison to a state-of-the-art reference dye (RK1), we were able to detect a new feature in the IMPS spectrum that is associated with the optical activation of the photochromic dye, providing a useful tool for assessing the electronic behavior of the device under different conditions of light excitation. This study provides guidelines to adequate characterization protocols of photochromic solar cells and essential insights on the interfacial electronic processes.

SUBMITTER: Riquelme AJ

PROVIDER: S-EPMC8488939 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Theoretical Investigation of Azobenzene-Based Photochromic Dyes for Dye-Sensitized Solar Cells.

Project description:Two donor-?-spacer-acceptor (D-?-A) organic dyes were designed as photochromic dyes with the same ?-spacer and acceptor but different donors, based on their electron-donating strength. Various structural, electronic, and optical properties, chemical reactivity parameters, and certain crucial factors that affect short-circuit current density (Jsc) and open circuit voltage (Voc) were investigated computationally using density functional theory and time-dependent density functional theory. The trans-cis isomerization of these azobenzene-based dyes and its effect on their properties was studied in detail. Furthermore, the dye-(TiO2)9 anatase nanoparticle system was simulated to understand the electronic structure of the interface. Based on the results, we justified how the trans-cis isomerization and different donor groups influence the physical properties as well as the photovoltaic performance of the resultant dye-sensitized solar cells (DSSCs). These theoretical calculations can be used for the rapid screening of promising dyes and their optimization for photochromic DSSCs.

| S-EPMC7279488 | biostudies-literature

A strategy to design novel structure photochromic sensitizers for dye-sensitized solar cells.

Project description:Two sensitizers with novel structure were designed and synthetized by introducing photochromic bisthienylethene (BTE) group into the conjugated system. Thanks to the photochromic effect the sensitizers have under ultraviolet and visible light, the conjugated bridge can be restructured and the resulting two photoisomers showed different behaviors in photovoltaic devices. This opens up a new research way for the dye-sensitized solar cells (DSSCs).

| S-EPMC4341208 | biostudies-literature

Photochromic naphthopyran dyes incorporating a benzene, thiophene or furan spacer: effect on photochromic, optoelectronic and photovoltaic properties in dye-sensitized solar cells.

Project description:We recently demonstrated that diaryl-naphthopyran photochromic dyes are efficient for sensitization of TiO2 mesoporous electrodes, thus allowing the fabrication of photo-chromo-voltaic cells that can self-adapt their absorption of light and their generation of electricity with the light intensity. Herein we report the synthesis, the characterisation of two novel photochromic dyes based on diaryl-naphthopyran core i.e NPI-ThPh and NPI-FuPh for use in Dye Sensitized Solar Cells (DSSCs). Compared to our reference dye NPI, the molecules only vary by the nature of the spacer, a thiophene or a furan, connecting the photochromic unit and the phenyl-cyano-acrylic acid moiety used as the anchoring function. We found that swapping a phenyl for a thiophene or a furan leads to an improvement of the absorption properties of the molecules both in solution and after grafting on TiO2 electrodes, however their photochromic process becomes not fully reversible. Despite better absorption in the visible range, the new dyes show poorer photochromic and photovoltaic properties in devices compared to NPI. Thanks to UV-Vis spectroscopy, DFT calculation, electrical characterization of the cells, and impedance spectroscopy, we unravel the factors limiting their performances. Our study contributes to better understand the connection between photochromic and photovoltaic properties, which is key to develop better performing molecules of this class.

| S-EPMC7613291 | biostudies-literature

First application of benzotriazole as a dye additive to dye-sensitized solar cells: electrochemical device characterization

Project description:Dye-sensitized solar cell, known as an emergent technology, has been attracted attention around the world. It has been easily produced by a mesoporous semiconductor oxide (SO), with a dye. On the other hand, some unexpected reactions as the back-electron recombination, reducing the solar cell efficiency. The presence of some molecules to act as an oxide passivation might rise up the collection reaction rate, and enhance the photoelectrochemical solar system parameters. The molecule used as a dye additive, must effortlessly adsorb in SO and potentiate the dye deaggregation. This work aims to study the benzotriazole (BTAH) insertion in DSSC with TiO2, evaluating its capability as a passivator molecule in such PV technology. The electrochemical results showed better electrochemical energy conversion efficiency with lower resistance with BTAH at 2.0 mg mL−1, achieving a jsc = 9.92 ± 0.26, Voc = 0.770 ± 0.022, FF = 0.557 ± 0.014, ɳ = 4.26 ± 0.13 with superior electron lifetime and amazing recombination prevention. Supplementary Information The online version contains supplementary material available at 10.1007/s13738-022-02645-1.

| S-EPMC9441823 | biostudies-literature

Fabrication of plasmonic dye-sensitized solar cells using ion-implanted photoanodes.

Project description:Plasmonic dye-sensitized solar cells containing metal nanoparticles suffer from stability issues due to their miscibility with liquid iodine-based electrolytes. To resolve the stability issue, herein, an ion implantation technique was explored to implant metal nanoparticles inside TiO2, which protected these nanoparticles with a thin coverage of TiO2 melt and maintained the localized surface plasmon resonance oscillations of the metal nanoparticles to efficiently enhance their light absorption and make them corrosion resistant. Herein, Au nanoparticles were implanted into the TiO2 matrix up to the penetration depth of 22 nm, and their influence on the structural and optical properties of TiO2 was studied. Moreover, plasmonic dye-sensitized solar cells were fabricated using N719 dye-loaded Au-implanted TiO2 photoanodes, and their power conversion efficiency was found to be 44.7% higher than that of the unimplanted TiO2-based dye-sensitized solar cells due to the enhanced light absorption of the dye molecules in the vicinity of the localized surface plasmon resonance of Au as well as the efficient electron charge transport at the TiO2@Au@N719/electrolyte interface.

| S-EPMC9065801 | biostudies-literature

Spectral splitting photovoltaics using perovskite and wideband dye-sensitized solar cells.

Project description:The extension of the light absorption of photovoltaics into the near-infrared region is important to increase the energy conversion efficiency. Although the progress of the lead halide perovskite solar cells is remarkable, and high conversion efficiency of >20% has been reached, their absorption limit on the long-wavelength side is ∼800 nm. To further enhance the conversion efficiency of perovskite-based photovoltaics, a hybridized system with near-infrared photovoltaics is a useful approach. Here we report a panchromatic sensitizer, coded DX3, that exhibits a broad response into the near-infrared, up to ∼1100 nm, and a photocurrent density exceeding 30 mA cm(-2) in simulated air mass 1.5 standard solar radiation. Using the DX3-based dye-sensitized solar cell in conjunction with a perovskite cell that harvests visible light, the hybridized mesoscopic photovoltaics achieved a conversion efficiency of 21.5% using a system of spectral splitting.

| S-EPMC4667623 | biostudies-literature

High-performance dye-sensitized solar cells using Ag-doped CoS counter electrodes.

Project description:CoS has been emerging as a promising Pt-free counter electrode (CE) material for dye-sensitized solar cells (DSSCs) due to its satisfactory electrocatalytic properties for redox reactions. However, its low electronic and ionic conductivities have limited its use in DSSCs. The doping of Ag with appropriate amount significantly improved the properties of CoS for application as a CE. Ag-doped CoS samples with various doping amounts were prepared by a facile one-step hydrothermal approach. There were very sharp changes of morphologies and particle sizes after doping different amounts of Ag. It is found that the DSSC fabricated with the 5% Ag-doped CoS CE achieved an impressive power-conversion efficiency (PCE) of 8.35% which was higher than that of the DSSC with a Pt CE (8.17%) by 2.2%, while the DSSC consisting of undoped CoS only exhibited a PCE of 6.93%. Such an enhanced PCE could be attributed to the significantly improved electrochemical activity and mixed conductivity resulting from the Ag dopant. Therefore, the excellent electrocatalytic activity, facile preparation and low material cost of the Ag-doped CoS electrode provide it with promising potential for large-scale production of new-generation DSSCs.

| S-EPMC9080620 | biostudies-literature

Analysis and Prediction of Hydrothermally Synthesized ZnO-Based Dye-Sensitized Solar Cell Properties Using Statistical and Machine-Learning Techniques.

Project description:Dye-sensitized solar cells (DSSCs) are one of the most versatile and low-cost solar cells. However, DSSCs are prone to low power conversion efficiency (PCE) compared to their counterparts, owing to their different synthesis parameters and process conditions. Therefore, designing efficient DSSCs and identifying the parameters that control the PCE of DSSCs are a critical tasks. We have collected data from hydrothermally synthesized DSSCs in the present work, published from 2005 to 2020. In line with publishing trends in the said period, we evaluate ZnO as a popular photoactive material for DSSC applications. We further analyzed the performance of hydrothermally synthesized ZnO DSSCs using different statistical techniques and provided some significant insights. We further applied the machine-learning technique with a decision tree algorithm to understand and discover the possible set of rules and heuristics that govern the morphology of the hydrothermally grown ZnO. In addition, we also employed supervised and unsupervised machine-learning models using conventional decision trees and classification and regression trees, respectively, to identify the dependence of the PCE of ZnO DSSCs on the different synthesis parameters. The reported work also evidences the PCE predictions of the ZnO DSSCs by using random forest and artificial neural network algorithms. The results substantiate that the random forest and artificial neural network algorithms successfully predict the PCE of the ZnO DSSCs with reasonable accuracy. Thus, we present a novel approach of applying statistical analysis and machine-learning algorithms to understand, discover, and predict the performance of DSSCs. We recommend extending the said know-how to other solar cells to identify rules and heuristics and experimentally realize highly efficient solar cells in shrinking manufacturing windows with a cost-effective approach.

| S-EPMC8582059 | biostudies-literature

A small electron donor in cobalt complex electrolyte significantly improves efficiency in dye-sensitized solar cells.

Project description:Photoelectrochemical approach to solar energy conversion demands a kinetic optimization of various light-induced electron transfer processes. Of great importance are the redox mediator systems accomplishing the electron transfer processes at the semiconductor/electrolyte interface, therefore affecting profoundly the performance of various photoelectrochemical cells. Here, we develop a strategy-by addition of a small organic electron donor, tris(4-methoxyphenyl)amine, into state-of-art cobalt tris(bipyridine) redox electrolyte-to significantly improve the efficiency of dye-sensitized solar cells. The developed solar cells exhibit efficiency of 11.7 and 10.5%, at 0.46 and one-sun illumination, respectively, corresponding to a 26% efficiency improvement compared with the standard electrolyte. Preliminary stability tests showed the solar cell retained 90% of its initial efficiency after 250?h continuous one-sun light soaking. Detailed mechanistic studies reveal the crucial role of the electron transfer cascade processes within the new redox system.

| S-EPMC5187592 | biostudies-literature

Fabrication, Optimization and Characterization of Natural Dye Sensitized Solar Cell.

Project description:The dyes extracted from pomegranate and berry fruits were successfully used in the fabrication of natural dye sensitized solar cells (NDSSC). The morphology, porosity, surface roughness, thickness, absorption and emission characteristics of the pomegranate dye sensitized photo-anode were studied using various analytical techniques including FESEM, EDS, TEM, AFM, FTIR, Raman, Fluorescence and Absorption Spectroscopy. Pomegranate dye extract has been shown to contain anthocyanin which is an excellent light harvesting pigment needed for the generation of charge carriers for the production of electricity. The solar cell's photovoltic performance in terms of efficiency, voltage, and current was tested with a standard illumination of air-mass 1.5 global (AM 1.5?G) having an irradiance of 100?mW/cm2. After optimization of the photo-anode and counter electrode, a photoelectric conversion efficiency (?) of 2%, an open-circuit voltage (Voc) of 0.39?mV, and a short-circuit current density (Isc) of 12.2?mA/cm2 were obtained. Impedance determination showed a relatively low charge-transfer resistance (17.44??) and a long lifetime, signifying a reduction in recombination losses. The relatively enhanced efficiency is attributable in part to the use of a highly concentrated pomegranate dye, graphite counter electrode and TiCl4 treatment of the photo-anode.

| S-EPMC5270247 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data