Feasibility study and direct extraction of endogenous free metallic cations combining hemodialysis and chelating polymer.
Ontology highlight
ABSTRACT:
SUBMITTER: Natuzzi M
PROVIDER: S-EPMC8497614 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The large-scale enrichment of metallic carbon nanotubes is a challenging goal that has proven elusive. Selective dispersion of carbon nanotubes by specifically designed conjugated polymers is effective for isolating semiconducting species, but a comparable system does not exist for isolating metallic species. Here, we report a two-polymer system where semiconducting species are extracted from the raw HiPCO or plasma-torch nanotube starting material using an electron-rich poly(fluorene-co-carbazole) derivative, followed by isolation of the metallic species remaining in the residue using an electron-poor methylated poly(fluorene-co-pyridine) polymer. Characterization of the electronic nature of extracted samples was carried out via a combination of absorption, Raman, and fluorescence spectroscopy, as well as electrical conductivity measurements. Using this methodology, the metallic species in the sample were enriched 2-fold in comparison to the raw starting material. These results indicate that the use of electron-poor polymers is an effective strategy for the enrichment of metallic species.
| S-EPMC6644074 | biostudies-literature
Project description:Loosely bound iron, due to its contribution to oxidative stress and inflammation, has become an important therapeutic target for many diseases. A water-soluble chitosan-based polymer exhibiting both antioxidant and chelating properties due to the dual functionalization with DOTAGA and DFO has been developed to extract this iron therefore preventing its catalytic production of reactive oxygen species. This functionalized chitosan was shown to have stronger antioxidant properties compared to conventional chitosan, improved iron chelating properties compared to the clinical therapy, deferiprone, and provided promising results for its application and improved metal extraction within a conventional 4 h hemodialysis session with bovine plasma.
| S-EPMC10188602 | biostudies-literature
Project description:BackgroundTranscranial direct current stimulation (tDCS) is a safe, portable, and inexpensive form of noninvasive brain stimulation that appears to augment the effects of concurrent therapy. However, several methodological issues in existing studies distance tDCS from current clinical practice. In this study, we offered (and administered) tDCS to individuals seeking typical behavioral aphasia therapy on an outpatient basis.MethodsWe approached clients (n = 10) planning to receive standard aphasia therapy at a university clinic. Following a brief description of tDCS, we offered to provide stimulation during their therapy. Those interested and without contraindications participated in a double-blind, sham-controlled crossover study of tDCS paired with speech-language therapy provided twice weekly. Participants received active (2 mA) or sham tDCS during two eight-week therapy phases (separated by ten weeks) with the anode over Broca's area and the cathode on the contralateral forehead. Stimulation was provided for the first 20 minutes of each one-hour session. Prior to and following each phase, participants were video recorded telling the Cinderella narrative. Recordings were transcribed and analyzed for correct information units (CIUs).ResultsSeven individuals (70%) were interested in and eligible for tDCS. Data from four participants who completed the study indicated a large effect size favoring active over sham tDCS (Cohen's d = 1.32). The participant with the most severe deficits did not benefit from therapy in either condition.ConclusionThere is potential for tDCS to enhance meaningful communication outcomes in standard clinical practice. Further investigation is needed to replicate findings and determine individual characteristics predictive of treatment response.
| S-EPMC7731681 | biostudies-literature
Project description:We present an electrically switchable, compact metasurface device based on the metallic polymer PEDOT:PSS in combination with a gel polymer electrolyte. Applying square-wave voltages, we can reversibly switch the PEDOT:PSS from dielectric to metallic. Using this concept, we demonstrate a compact, standalone, and CMOS compatible metadevice. It allows for electrically controlled ON and OFF switching of plasmonic resonances in the 2-3 µm wavelength range, as well as electrically controlled beam switching at angles up to 10°. Furthermore, switching frequencies of up to 10 Hz, with oxidation times as fast as 42 ms and reduction times of 57 ms, are demonstrated. Our work provides the basis towards solid state switchable metasurfaces, ultimately leading to submicrometer-pixel spatial light modulators and hence switchable holographic devices.
| S-EPMC10125172 | biostudies-literature
Project description:Plasmonic coupling between adjacent metallic nanoparticles can be exploited for acousto-plasmonics, single-molecule sensing, and photochemistry. Light absorption or electron probes can be used to study plasmons and their interactions, but their use is challenging for disordered systems and colloids dispersed in insulating matrices. Here, we investigate the effect of plasmonic coupling on optomechanics with Brillouin light spectroscopy (BLS) in a prototypical metal-polymer nanocomposite, gold nanorods (Au NRs) in polyvinyl alcohol. The intensity of the light inelastically scattered on thermal phonons captured by BLS is strongly affected by the wavelength of the probing light. When light is resonant with the transverse plasmons, BLS reveals mostly the normal vibrational modes of single NRs. For lower energy off-resonant light, BLS is dominated by coupled bending modes of NR dimers. The experimental results, supported by optomechanical calculations, document plasmonically enhanced BLS and reveal energy-dependent confinement of coupled plasmons close to the tips of NR dimers, generating BLS hot-spots. Our work establishes BLS as an optomechanical probe of plasmons and promotes nanorod-soft matter nanocomposites for acousto-plasmonic applications.
| S-EPMC9798866 | biostudies-literature
Project description:Malachite green (MG) is currently posing a carcinogenic threat to the safety of human lives; therefore, it is highly desirable to develop an effective method for fast trace detection of MG. Herein, for the first time, this paper presents a systematic study on polymer microspheres, being prepared by combined Pickering emulsion polymerization and molecular imprinting, to detect and purify MG. The microspheres, molecularly imprinted with MG, show enhanced adsorption selectivity to MG, despite a somewhat lowered adsorption capacity, as compared to the counterpart without molecular imprinting. Structural features and adsorption performance of these microspheres are elucidated by different characterizations and kinetic and thermodynamic analyses. The surface of the molecularly imprinted polymer microspheres (M-PMs) exhibits regular pores of uniform pore size distribution, endowing M-PMs with impressive adsorption selectivity to MG. In contrast, the microspheres without molecular imprinting show a larger average particle diameter and an uneven porous surface (with roughness and a large pore size), causing a lower adsorption selectivity to MG despite a higher adsorption capacity. Various adsorption conditions are investigated, such as pH and initial concentration of the solution with MG, for optimizing the adsorption performance of M-PMs in selectively tackling MG. The adsorption kinetics and thermodynamics are deeply discussed and analyzed, so as to provide a full picture of the adsorption behaviors of the polymer microspheres with and without the molecular imprinting. Significantly, M-PMs show promising solid-phase extraction column applications for recovering MG in a continuous extraction manner.
| S-EPMC6418669 | biostudies-literature
Project description:Current conventional detection of SARS-CoV-2 involves collection of a patient's sample with a nasopharyngeal swab, storage of the swab during transport in a viral transport medium, extraction of RNA, and quantitative reverse transcription PCR (RT-qPCR). We developed a simplified preparation method using a chelating resin, Chelex, which obviates RNA extraction during viral testing. Direct detection RT-qPCR and digital droplet PCR were compared to the current conventional method with RNA extraction for simulated samples and patient specimens. The heat treatment in the presence of Chelex markedly improved detection sensitivity as compared to heat alone, and lack of RNA extraction shortens the overall diagnostic workflow. Furthermore, the initial sample heating step inactivates SARS-CoV-2 infectivity, thus improving workflow safety. This fast RNA preparation and detection method is versatile for a variety of samples, safe for testing personnel, and suitable for standard clinical collection and testing on high-throughput platforms.
| S-EPMC8349732 | biostudies-literature
Project description:IntroductionIn this work we selected components, developed technology and studied a number of parameters of polymer nanocomposite materials, remembering that the material would have high optical and good mechanical characteristics, good sorption ability in order to ensure high value of the optical signal for a short time while maintaining the initial geometric shape. In addition, if this nanocomposite is used for medicine and biology (biocompatible or biocidal materials or the creation of a sensor based on it), the material must be non-toxic and/or biocompatible. We study the creation of polymer nanocomposites which may be applied as biocompatible materials with new functional parameters.Material and methodsA number of polymer nanocomposites based on various urethane-acrylate monomers and nanoparticles of gold, silicon oxides, zinc and/or titanium oxides are obtained, their mechanical (microhardness) properties and wettability (contact angle) are studied. The set of required, biology-related properties of these materials, such as toxicity and sorption of microorganisms are also investigated in order to prove their possible applicability.Results and discussionThe composition of the samples influences their microhardness and the value of contact angle, which means that varying with the monomer and the metallic, oxide nanoparticles composition, we could change these parameters. Besides it, the set of required, biology-related properties of these materials, such as toxicity and sorption of microorganisms were also investigated in order to prove their possible applicability. It was shown that the materials are non-toxic, the adhesion of microorganisms on their surface also could be varied by changing their composition.ConclusionThe presented polymer nanocomposites with different compositions of monomer and the presence of nanoparticles in them are prospective material for a possible bio-application as it is biocompatible, not toxic. The sorption of microorganism could be varied depending on the type of bacterias, the monomer composition, and nanoparticles.
| S-EPMC7127852 | biostudies-literature
Project description:Cloud point extraction (CPE) is a separation and preconcentration of non-ionic surfactant from one liquid phase to another. In this study, Sylgard 309 and three different types of additives for CPE, namely CPE-Sylgard, CPE-Sylgard-BMIMBr and CPE-Sylgard-GLDA, are investigated to extract methylphenol from water samples. The methylphenols are well separated by reversed-phase high-performance liquid chromatography (HPLC) with isocratic elution of acetonitrile : water; 60 : 40 (v/v) and detection at 260 nm. The optimized parameters for the effect of salt, surfactant, temperature, time of extraction, pH, interference study and the performance of different additives on methylphenol extraction are investigated. CPE-Sylgard-GLDA is chosen because it gives us a high peak and good peak area compared with CPE-Sylgard and CPE-Sylgard-BMIMBr. The recovery extractions of CPE-Sylgard-GLDA are obtained in the range of 80-99% as the percentage of relative standard deviation (RSD) is less than 10. The LOD and LOQ are 0.05 ppm and 0.18 ppm, respectively. The method developed for CPE-Sylgard-GLDA coupled with HPLC is feasible for the determination of methylphenol because it is simple, effective, cheap, and produces a high percentage of recovery.
| S-EPMC6083667 | biostudies-literature
Project description:Red blood cell (RBC) hemolysis is one of the most common storage lesions in packed RBCs (pRBC). Older units of pRBCs, especially those?>?21 days old, have increasing levels of hemolysis leading to increased oxidative stress and premature platelet activation. This effect can mostly be attributed to the increase of cell-free hemoglobin (Hb). Therefore, removal of cell-free Hb from pRBCs prior to transfusion could mitigate these deleterious effects. We propose a new method for the removal of Hb from pRBCs using zinc beads. Prepared Hb solutions and pRBCs were treated with zinc beads using two different protocols. UV-Vis spectrophotometry was used to determine Hb concentrations, before and after treatment. Experiments were run in triplicate and paired t tests were used to determine significant differences between groups. Zinc beads removed on average 94% of cell-free Hb within 15 min and 78% Hb from pRBCs (p?<?0.0001), demonstrating a maximum binding capacity?~?66.2?±?0.7 mg Hb/mL beads. No differences in RBC morphology or deformability were observed after treatment. This study demonstrates the feasibility of using zinc beads for the rapid and targeted removal of Hb from pRBC units. Further investigation is needed to scale this method for large volume removal.
| S-EPMC6506348 | biostudies-literature