An approach to increase the power output of Karnafuli Hydroelectric Power Station: A step to sustainable development in Bangladesh's energy sector.
Ontology highlight
ABSTRACT:
SUBMITTER: Hossain FS
PROVIDER: S-EPMC8504746 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:We present the design of a power management integrated circuit that processes harvested energy from radio frequency waves and piezoelectric vibrations. The rectification of piezoelectric and RF sources has a power conversion efficiency (PCE) of 87.73% and 74.70%, respectively. The asynchronous and microcontroller-less integrated circuit (IC) is designed to be low power, so the bulk of the harvested energy goes to three loads. The output peak powers of 111 μW, 156 μW, and 128 μW will be sufficient to run small devices for RF communication systems.
| S-EPMC7602376 | biostudies-literature
Project description:The right bank high slope of the Dagangshan Hydroelectric Power Station is located in complicated geological conditions with deep fractures and unloading cracks. How to obtain the mechanical parameters and then evaluate the safety of the slope are the key problems. This paper presented a displacement back analysis for the slope using an artificial neural network model (ANN) and particle swarm optimization model (PSO). A numerical model was established to simulate the displacement increment results, acquiring training data for the artificial neural network model. The backpropagation ANN model was used to establish a mapping function between the mechanical parameters and the monitoring displacements. The PSO model was applied to initialize the weights and thresholds of the backpropagation (BP) network model and determine suitable values of the mechanical parameters. Then the elastic moduli of the rock masses were obtained according to the monitoring displacement data at different excavation stages, and the BP neural network model was proved to be valid by comparing the measured displacements, the displacements predicted by the BP neural network model, and the numerical simulation using the back-analyzed parameters. The proposed model is useful for rock mechanical parameters determination and instability investigation of rock slopes.
| S-EPMC4129176 | biostudies-other
Project description:A hybrid hydrogen-carbon (H(2)CAR) process for the production of liquid hydrocarbon fuels is proposed wherein biomass is the carbon source and hydrogen is supplied from carbon-free energy. To implement this concept, a process has been designed to co-feed a biomass gasifier with H(2) and CO(2) recycled from the H(2)-CO to liquid conversion reactor. Modeling of this biomass to liquids process has identified several major advantages of the H(2)CAR process. (i) The land area needed to grow the biomass is <40% of that needed by other routes that solely use biomass to support the entire transportation sector. (ii) Whereas the literature estimates known processes to be able to produce approximately 30% of the United States transportation fuel from the annual biomass of 1.366 billion tons, the H(2)CAR process shows the potential to supply the entire United States transportation sector from that quantity of biomass. (iii) The synthesized liquid provides H(2) storage in an open loop system. (iv) Reduction to practice of the H(2)CAR route has the potential to provide the transportation sector for the foreseeable future, using the existing infrastructure. The rationale of using H(2) in the H(2)CAR process is explained by the significantly higher annualized average solar energy conversion efficiency for hydrogen generation versus that for biomass growth. For coal to liquids, the advantage of H(2)CAR is that there is no additional CO(2) release to the atmosphere due to the replacement of petroleum with coal, thus eliminating the need to sequester CO(2).
| S-EPMC1821126 | biostudies-literature
Project description:Reducing energy usage and promoting energy management practices remain hot issues in the construction sector. Construction firms are not interested to adopt energy conservation and management practices in their projects. Despite the successful integration of energy management practices in developed nations, their adaptability in developing countries, especially in Pakistan, is at a slow pace. Therefore, drivers to energy management practices need to be realized for its adoption. Based on this, the current study intends to evaluate the drivers of energy management practices adopted in the construction sector of Pakistan by using a four-stage methodology. Fuzzy Delphi method (FDM), interpretive structural modeling (ISM), and Matrice d'Impacts Croises Multiplication Appliques a un Classement (MICMAC) analysis were integrated with prioritizing essential drivers. Increased tax imposition on construction companies for energy usage and pollution contribution, promotion of investment subsidies for energy efficiency technologies, and increased enforcement of government rules and regulations regarding on-site energy management practices arose as significant drivers to adoption of energy management practices in the construction sector of Pakistan. These results will be helpful for policymakers to develop effective policies for integrating energy management practices in the construction sector. This study contributes significantly by developing a novel model of drivers affecting EMP adoption in the Pakistani construction sector. Further research might be expanded to other developing countries to validate current results.
| S-EPMC9302223 | biostudies-literature
Project description:The Rhine catchment in Switzerland has been transformed by a chain of hydroelectric power stations. We addressed the impact of fragmentation on the genetic structure of fish populations by focusing on the European chub (Squalius cephalus). This fish species is not stocked and copes well with altered habitats, enabling an assessment of the effects of fragmentation per se. Using microsatellites, we genotyped 2133 chub from 47 sites within the catchment fragmented by 37 hydroelectric power stations, two weirs and the Rhine Falls. The shallow genetic population structure reflected drainage topology and was affected significantly by barriers to migration. The effect of power stations equipped with fishpasses on genetic differentiation was detectable, albeit weaker than that of man-made barriers without fishpasses. The Rhine Falls as the only long-standing natural obstacle (formed 14 000 to 17 000 years ago) also had a strong effect. Man-made barriers also exacerbated the upstream decrease in allelic diversity in the catchment, particularly when lacking fishpasses. Thus, existing fishpasses do have the desired effect of mitigating fragmentation, but barriers still reduce population connectivity in a fish that traverses fishpasses better than many other species. Less mobile species are likely to be affected more severely.
| S-EPMC4721079 | biostudies-literature
Project description:In this review, we summarize research efforts to realize Na-based organic materials for novel battery chemistries. Na is a more abundant element than Li, thereby contributing to less costly materials with limited to no geopolitical constraints while organic electrode materials harvested from biomass resources provide the possibility of achieving renewable battery components with low environmental impact during processing and recycling. Together, this can form the basis for truly sustainable electrochemical energy storage. We explore the efforts made on electrode materials of organic salts, primarily carbonyl compounds but also Schiff bases, unsaturated compounds, nitroxides and polymers. Moreover, sodiated carbonaceous materials derived from biomasses and waste products are surveyed. As a conclusion to the review, some shortcomings of the currently investigated materials are highlighted together with the major limitations for future development in this field. Finally, routes to move forward in this direction are suggested.
| S-EPMC5456737 | biostudies-other
Project description:Control of light absorption and transmission by metal-insulator-metal (MIM) metasurfaces are promising for applications in optical windows. This study shows the realization of photo-thermal energy conversion for radiative cooling by MIM metasurfaces with thin metal substrate and Indium-Tin-Oxide (ITO). High transparency of ITO at visible wavelengths and high absorption at mid-infrared wavelengths were realized for future applications of efficient cooling or heating applicable for living and working spaces. The MIM (ITO/CaF2/ITO) metasurface was patterned with low-resolution photo-lithography as a demonstration of further simplification and possible scalability of the patterning for practical window applications.
| S-EPMC9609501 | biostudies-literature
Project description:Green hydrogen can help to decarbonize parts of the transportation sector, but its power sector interactions are not well understood so far. It may contribute to integrating variable renewable energy sources if production is sufficiently flexible in time. Using an open-source co-optimization model of the power sector and four options for supplying hydrogen at German filling stations, we find a trade-off between energy efficiency and temporal flexibility. For lower shares of renewables and hydrogen, more energy-efficient and less flexible small-scale on-site electrolysis is optimal. For higher shares of renewables and/or hydrogen, more flexible but less energy-efficient large-scale hydrogen supply chains gain importance, as they allow to temporally disentangle hydrogen production from demand via storage. Liquid hydrogen emerges as particularly beneficial, followed by liquid organic hydrogen carriers and gaseous hydrogen. Large-scale hydrogen supply chains can deliver substantial power sector benefits, mainly through reduced renewable curtailment. Energy modelers and system planners should consider the distinct flexibility characteristics of hydrogen supply chains in more detail when assessing the role of green hydrogen in future energy transition scenarios. We also propose two alternative cost and emission metrics which could be useful in future analyses.
| S-EPMC8271012 | biostudies-literature
Project description:Fertilization requires sperm to travel long distances through the complex environment of the female reproductive tract. Despite the strong association between poor motility and infertility, the kinetics of sperm tail movement and the role individual proteins play in this process is poorly understood. Here, we use a high spatiotemporal sperm imaging system and an analysis protocol to define the role of CRISPs in the mechanobiology of sperm function. Each of CRISP1, CRISP2, and CRISP4 is required to optimize sperm flagellum waveform. Each plays an autonomous role in defining beat frequency, flexibility, and power dissipation. We thus posit that the expansion of the CRISP family from one member in basal vertebrates, to three in most mammals, and four in numerous rodents, represents an example of neofunctionalization wherein proteins with a common core function, boosting power output, have evolved to optimize different aspects of sperm tail performance.
| S-EPMC8374954 | biostudies-literature
Project description:The qualitative and quantitative measurements of protein abundance and protein modification states are essential in understanding their role in diverse cellular processes. Traditional Western blotting technique, though sensitive, is prone to produce substantial errors and is not readily adapted to high-throughput technologies. We propose a modified immunoblotting procedure, which is based on simultaneous transfer of proteins from multiple gel-strips onto the same membrane, and is compatible with any conventional gel electrophoresis system. As a result, the data output per single blotting cycle can readily be increased up to ten-fold. In contrast to the traditional "one protein detection per electrophoresis cycle", this procedure allows simultaneous monitoring of up to nine different proteins. In addition to maintaining the ability to detect picogram quantities of protein, the modified system substantially improves data accuracy by reducing signal errors by two-fold. Multistrip Western blotting procedure allows making statistically reliable side-by-side comparisons of different or repeated sets of data. Compared to the traditional methods, this approach provides a more economical, reproducible, and effective procedure, facilitating the generation of large amounts of high-quality quantifiable data.
| S-EPMC2410211 | biostudies-literature