Ag/MgO Nanoparticles via Gas Aggregation Nanocluster Source for Perovskite Solar Cell Engineering.
Ontology highlight
ABSTRACT:
SUBMITTER: Caleffi M
PROVIDER: S-EPMC8509757 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In this contribution, the efficiencies of perovskite solar cells have been further enhanced, based on optical optimization studies. The photovoltaic devices with textured perovskite film can be obtained and a power conversion efficiency (PCE) of the textured fluorine-doped tin oxide (FTO)/Ag nanoparticles (NPs) embedded in c-TiO₂/m-TiO₂/CH₃NH₃PbI₃/Spiro-OMeTAD/Au showed 33.7% enhancement, and a maximum of up to 14.01% was achieved. The efficiency enhancement can be attributed to the light trapping effect caused by the textured FTO and the incorporated Ag NPs, which can enhance scattering to extend the optical pathway in the photoactive layer of the solar cell. Interestingly, aside from enhanced light absorption, the charge transport characteristics of the devices can be improved by optimizing Ag NPs loading levels, which is due to the localized surface plasmon resonance (LSPR) from the incorporated Ag NPs. This light trapping strategy helps to provide an appropriated management for optical optimization of perovskite solar cells.
| S-EPMC6215094 | biostudies-literature
Project description:It is critical to prepare smooth and dense perovskite films for the fabrication of high efficiency perovskite solar cells. However, solution casting process often results in films with pinhole formation and incomplete surface coverage. Herein, we demonstrate a fast and efficient vacuum deposition method to optimize the surface morphology of solution-based perovskite films. The obtained planar devices exhibit an average power conversion efficiency (PCE) of 13.42% with a standard deviation of ±2.15% and best efficiency of 15.57%. Furthermore, the devices also show excellent stability of over 30 days with a slight degradation <9% when stored under ambient conditions. We also investigated the effect of vacuum deposition thickness on the electron transportation and overall performance of the devices. This work provides a versatile approach to prepare high-quality perovskite films and paves a way for high-performance and stable perovskite photovoltaic devices.
| S-EPMC5670249 | biostudies-literature
Project description:Recent research shows that the interface state in perovskite solar cells is the main factor which affects the stability and performance of the device, and interface engineering including strain engineering is an effective method to solve this issue. In this work, a CsBr buffer layer is inserted between NiO x hole transport layer and perovskite layer to relieve the lattice mismatch induced interface stress and induce more ordered crystal growth. The experimental and theoretical results show that the addition of the CsBr buffer layer optimizes the interface between the perovskite absorber layer and the NiO x hole transport layer, reduces interface defects and traps, and enhances the hole extraction/transfer. The experimental results show that the power conversion efficiency of optimal device reaches up to 19.7% which is significantly higher than the efficiency of the device without the CsBr buffer layer. Meanwhile, the device stability is also improved. This work provides a deep understanding of the NiO x /perovskite interface and provides a new strategy for interface optimization.
| S-EPMC7284208 | biostudies-literature
Project description:Reducing the energy loss and retarding the carrier recombination at the interface are crucial to improve the performance of the perovskite solar cell (PSCs). However, little is known about the recombination mechanism at the interface of anode and SnO2 electron transfer layer (ETL). In this work, an ultrathin wide bandgap dielectric MgO nanolayer is incorporated between SnO2:F (FTO) electrode and SnO2 ETL of planar PSCs, realizing enhanced electron transporting and hole blocking properties. With the use of this electrode modifier, a power conversion efficiency of 18.23% is demonstrated, an 11% increment compared with that without MgO modifier. These improvements are attributed to the better properties of MgO-modified FTO/SnO2 as compared to FTO/SnO2, such as smoother surface, less FTO surface defects due to MgO passivation, and suppressed electron-hole recombinations. Also, MgO nanolayer with lower valance band minimum level played a better role in hole blocking. When FTO is replaced with Sn-doped In2O3 (ITO), a higher power conversion efficiency of 18.82% is demonstrated. As a result, the device with the MgO hole-blocking layer exhibits a remarkable improvement of all J-V parameters. This work presents a new direction to improve the performance of the PSCs based on SnO2 ETL by transparent conductive electrode surface modification.
| S-EPMC5604382 | biostudies-literature
Project description:Despite the impressive photovoltaic performances with power conversion efficiency beyond 22%, perovskite solar cells are poorly stable under operation, failing by far the market requirements. Various technological approaches have been proposed to overcome the instability problem, which, while delivering appreciable incremental improvements, are still far from a market-proof solution. Here we show one-year stable perovskite devices by engineering an ultra-stable 2D/3D (HOOC(CH2)4NH3)2PbI4/CH3NH3PbI3 perovskite junction. The 2D/3D forms an exceptional gradually-organized multi-dimensional interface that yields up to 12.9% efficiency in a carbon-based architecture, and 14.6% in standard mesoporous solar cells. To demonstrate the up-scale potential of our technology, we fabricate 10 × 10?cm2 solar modules by a fully printable industrial-scale process, delivering 11.2% efficiency stable for >10,000?h with zero loss in performances measured under controlled standard conditions. This innovative stable and low-cost architecture will enable the timely commercialization of perovskite solar cells.
| S-EPMC5461484 | biostudies-literature
Project description:Formamidinium lead triiodide (FAPbI3) perovskite quantum dots (PQDs) show great advantages in photovoltaic applications due to their ideal bandgap energy, high stability and solution processability. The anti-solvent used for the post-treatment of FAPbI3 PQD solid films significantly affects the surface chemistry of the PQDs, and thus the vacancies caused by surface ligand removal inhibit the optoelectronic properties and stability of PQDs. Here, we study the effects of different anti-solvents with different polarities on FAPbI3 PQDs and select a series of organic molecules for surface passivation of PQDs. The results show that methyl acetate could effectively remove surface ligands from the PQD surface without destroying its crystal structure during the post-treatment. The benzamidine hydrochloride (PhFACl) applied as short ligands of PQDs during the post-treatment could fill the A-site and X-site vacancies of PQDs and thus improve the electronic coupling of PQDs. Finally, the PhFACl-based PQD solar cell (PQDSC) achieves a power conversion efficiency of 6.4%, compared to that of 4.63% for the conventional PQDSC. This work provides a reference for insights into the surface passivation of PQDs and the improvement in device performance of PQDSCs. Graphical abstract Supplementary Information The online version contains supplementary material available at 10.1007/s12200-022-00038-z.
| S-EPMC9756204 | biostudies-literature
Project description:In this work, we report an easy, efficient method to synthesize high quality lithium-based upconversion nanoparticles (UCNPs) which combine two promising materials (UCNPs and lithium ions) known to enhance the photovoltaic performance of perovskite solar cells (PSCs). Incorporating the synthesized YLiF4:Yb,Er nanoparticles into the mesoporous layer of the PSCs cells, at a certain doping level, demonstrated a higher power conversion efficiency (PCE) of 19%, additional photocurrent, and a better fill factor (FF) of 82% in comparison to undoped PSCs (PCE = ~16.5%; FF = 71%). The reported results open a new avenue toward efficient PSCs for renewable energy applications.
| S-EPMC8623711 | biostudies-literature
Project description:Nanoparticles can be used in a large variety of applications, including magnetic sensing, biological, superconductivity, tissue engineering, and other fields. In this study, we explore the fabrication of gas phase silver nanoparticles using a sputtering evaporation source. This setup composed of a dual magnetron cluster source holds several advantages over other techniques. The system has independent control over the cluster concentration and a wide range of cluster size and materials that can be used for the clusters and for the matrix where it can be embedded. Characterization of these silver nanoparticles was done using transmission electron microscopy (TEM). We obtain a lateral width of 10.6 nm with a dispersion of 0.24 nm. With atomic force microscopy (AFM) a Gaussian fit of this distribution yields and average height of 6.3 nm with a standard deviation of 1.4 nm. We confirm that the deposited silver nanoparticles have a homogenous area distribution, that they have a defined shape and size distribution, and that they are single standing nanoparticles. Given that the scientific literature is not precise regarding the toxic concentration of the nanoparticles, devices such as ours can help clarify these questions. In order to explore further biological applications, we have done preliminary experiments of cell spreading (myoblast adhesion), obtaining interesting morphological changes correlated with the silver concentration on the surface. With a deposited silver concentration ranging from 100?620 ng/cm², the cells showed morphological changes in a short time of 2 h. We conclude that this high precision nanoparticle fabrication technique is adequate for further biological research.
| S-EPMC6316590 | biostudies-literature
Project description:The mixed halide perovskites have emerged as outstanding light absorbers for efficient solar cells. Unfortunately, it reveals inhomogeneity in these polycrystalline films due to composition separation, which leads to local lattice mismatches and emergent residual strains consequently. Thus far, the understanding of these residual strains and their effects on photovoltaic device performance is absent. Herein we study the evolution of residual strain over the films by depth-dependent grazing incident X-ray diffraction measurements. We identify the gradient distribution of in-plane strain component perpendicular to the substrate. Moreover, we reveal its impacts on the carrier dynamics over corresponding solar cells, which is stemmed from the strain induced energy bands bending of the perovskite absorber as indicated by first-principles calculations. Eventually, we modulate the status of residual strains in a controllable manner, which leads to enhanced PCEs up to 20.7% (certified) in devices via rational strain engineering.
| S-EPMC6379394 | biostudies-literature
Project description:A distinctive synthetic method for the efficient synthesis of multifunctional bimetallic plasmonic Au@Ag core@shell nanoparticles (NPs) with tunable size, morphology, and localized surface plasmon resonance (LSPR) using Triton X-100/hexanol-1/deionized water/cyclohexane-based water-in-oil (W/O) microemulsion (ME) is described. The W/O ME acted as a "true nanoreactor" for the synthesis of Au@Ag core@shell NPs by providing a confined and controlled environment and suppressing the nucleation, growth, agglomeration, and aggregation of the NPs. High-resolution transmission electron microscopic analysis of the synthesized Au@Ag core@shell NPs revealed an "unusual core@shell" contrast, and the selected area electron diffraction and Moiré patterns showed that Au layers are paralleled to Ag layers, thus indicating the formation of Au@Ag core@shell NPs. Interestingly, the UV-visible spectrum of the Au@Ag core@shell NPs exhibited enthralling plasmonic properties by introducing a high-frequency quadrupolar LSPR mode originated from the isolated Au@Ag NPs along with a low-frequency dipolar LSPR mode originated from the coupled Au@Ag NPs. The effective plasmonic enhancement of the Au@Ag core@shell NPs is attributed to the extreme enhancement of the localized electromagnetic field by coupling of the localized surface plasmons of the Au core and Ag shell. The mechanisms for the nucleation and growth of Au@Ag core@shell NPs in W/O ME have been proposed. A unique electron transfer phenomenon between the Au core and Ag shell is elucidated for better understanding and manipulation of the electronic properties, which evinced the development of Au@Ag core@shell NPs through suppression of the galvanic replacement reaction.
| S-EPMC6843713 | biostudies-literature