Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electrochemical Performance of Orthorhombic CsPbI₃ Perovskite in Li-Ion Batteries.

ABSTRACT: A facile solution process was employed to prepare CsPbI₃ as an anode material for Li-ion batteries. Rietveld refinement of the X-ray data confirms the orthorhombic phase of CsPbI₃ at room temperature. As obtained from bond valence calculations, strained bonds between Pb and I are identified within PbI₆ octahedral units. Morphological study shows that the as-prepared δ-CsPbI₃ forms a nanorod-like structure. The XPS analysis confirm the presence of Cs (3d, 4d), Pb (4d, 4f, 5d) and I (3p, 3d, 4d). The lithiation process involves both intercalation and conversion reactions, as confirmed by cyclic voltammetry (CV) and first-principles calculations. Impedance spectroscopy coupled with the distribution function of relaxation times identifies charge transfer processes due to Li metal foil and anode/electrolyte interfaces. An initial discharge capacity of 151 mAhg^-1 is found to continuously increase to reach a maximum of ~275 mAhg^-1 at 65 cycles, while it drops to ~240 mAhg^-1 at 75 cycles and then slowly decreases to 235 mAhg^-1 at 100 cycles. Considering the performance and structural integrity during electrochemical performance, δ-CsPbI₃ is a promising material for future Li-ion battery (LIB) application.

SUBMITTER: Kaisar N

PROVIDER: S-EPMC8510073 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Electrochemical Li Topotactic Reaction in Layered SnP3 for Superior Li-Ion Batteries.

Project description:The development of new anode materials having high electrochemical performances and interesting reaction mechanisms is highly required to satisfy the need for long-lasting mobile electronic devices and electric vehicles. Here, we report a layer crystalline structured SnP3 and its unique electrochemical behaviors with Li. The SnP3 was simply synthesized through modification of Sn crystallography by combination with P and its potential as an anode material for LIBs was investigated. During Li insertion reaction, the SnP3 anode showed an interesting two-step electrochemical reaction mechanism comprised of a topotactic transition (0.7-2.0?V) and a conversion (0.0-2.0?V) reaction. When the SnP3-based composite electrode was tested within the topotactic reaction region (0.7-2.0?V) between SnP3 and LixSnP3 (x???4), it showed excellent electrochemical properties, such as a high volumetric capacity (1st discharge/charge capacity was 840/663?mA h cm(-3)) with a high initial coulombic efficiency, stable cycle behavior (636?mA h cm(-3) over 100 cycles), and fast rate capability (550?mA h cm(-3) at 3C). This layered SnP3 anode will be applicable to a new anode material for rechargeable LIBs.

| S-EPMC5075908 | biostudies-other

Superior Electrochemical Performance of Thin-Film Thermoplastic Elastomer-Coated SnSb as an Anode for Li-ion Batteries.

Project description:The high failure strain of thermoplastic elastomers (TPEs) is a very desirable feature for rechargeable Li-ion batteries by improving the lifetime of high specific capacity anode materials that undergo mechanical fractures induced by large volume variations. In this work, poly(styrene-b-2-hydroxyethyl acrylate) called PS-b-PHEA was synthesized by a nitroxide meditated polymerization method. Owing to the use of a specific polystyrene macroinitiator (SG1), a suitable TPE copolymer with long hydroxyethyl acrylate blocks to ensure good mechanical properties is obtained for the first time. We show that the electrochemical properties of the PS-b-PHEA-coated SnSb anode are drastically improved by suppressing the crack formation at the surface of the electrode. Indeed, electrochemical characterization revealed that a high and stable gravimetric capacity over 100 cycles could be achieved. Moreover, excellent capacity reversibility was achieved when cycled at multiple C-rates and fast kinetics confirming the strong protection role of the polymer. The advanced chemical and mechanical properties of PS-b-PHEA open up promising perspectives to significantly improve the electrochemical performance of all electrodes that are known to suffer from large volume variations.

| S-EPMC6416307 | biostudies-literature

Electrochemical Oscillation during Galvanostatic Charging of LiCrTiO4 in Li-Ion Batteries.

Project description:In the late 1960s, the establishment of Prigogine's dissipative structure theory laid the foundation for the (electro)chemical oscillation phenomenon, which has been widely investigated in some electrochemical reactions, such as electro-catalysis and electro-deposition, while the electrochemical oscillation of Li-ion batteries has just been discovered in spinel Li4Ti5O12 a few years before. In this work, spinel LiCrTiO4 samples were synthesized by using a high-temperature solid-state method, characterized with SEM (Scanning electron microscope), XRD (X-ray diffraction), Raman and XPS (X-ray photoelectron spectroscopy) measurements, and electrochemically tested in Li-ion batteries to study the electrochemical oscillation. When sintering in a powder form at a temperature between 800 and 900 °C, we achieved the electrochemical oscillation of spinel LiCrTiO4 during charging, and it is suppressed in the non-stoichiometric LiCrTiO4 samples, especially for reducing the Li content or increasing the Cr content. Therefore, this work developed another two-phase material as the powder-sintered LiCrTiO4 exhibiting the electrochemical oscillation in Li-ion batteries, which would inspire us to explore more two-phase electrode materials in Li-ion batteries, Na-ion batteries, etc.

| S-EPMC8269718 | biostudies-literature

Hierarchically ordered mesoporous Co3O4 materials for high performance Li-ion batteries.

Project description:Highly ordered mesoporous Co3O4 materials have been prepared via a nanocasting route with three-dimensional KIT-6 and two-dimensional SBA-15 ordered mesoporous silicas as templates and Co(NO3)2 · 6H2O as precursor. Through changing the hydrothermal treating temperature of the silica template, ordered mesoporous Co3O4 materials with hierarchical structures have been developed. The larger pores around 10 nm provide an efficient transport for Li ions, while the smaller pores between 3-5 nm offer large electrochemically active areas. Electrochemical impedance analysis proves that the hierarchical structure contributes to a lower charge transfer resistance in the mesoporous Co3O4 electrode than the mono-sized structure. High reversible capacities around 1141 mAh g(-1) of the hierarchically mesoporous Co3O4 materials are obtained, implying their potential applications for high performance Li-ion batteries.

| S-EPMC4726024 | biostudies-other

Orthorhombic Nb2O5-x for Durable High-Rate Anode of Li-Ion Batteries.

Project description:Li4Ti5O12 anode can operate at extraordinarily high rates and for a very long time, but it suffers from a relatively low capacity. This has motivated much research on Nb2O5 as an alternative. In this work, we present a scalable chemical processing strategy that maintains the size and morphology of nano-crystal precursor but systematically reconstitutes the unit cell composition, to build defect-rich porous orthorhombic Nb2O5-x with a high-rate capacity many times those of commercial anodes. The procedure includes etching, proton ion exchange, calcination, and reduction, and the resulting Nb2O5-x has a capacity of 253 mA h g-1 at 0.5C, 187 mA h g-1 at 25C, and 130 mA h g-1 at 100C, with 93.3% of the 25C capacity remaining after cycling for 4,000 times. These values are much higher than those reported for Nb2O5 and Li4Ti5O12, thanks to more available surface/sub-surface reaction sites and significantly improved fast ion and electron conductivity.

| S-EPMC6941880 | biostudies-literature

Sb nanosheet modified separator for Li-S batteries with excellent electrochemical performance.

Project description:An air-stable antimony (Sb) nanosheet modified separator (SbNs/separator) has been prepared by coating exfoliated Sb nanosheets (SbNs) successfully onto a pristine separator through a vacuum infiltration method. The as-prepared Li-S batteries using SbNs/separators exhibit much improved electrochemical performance compared to the ones using commercial separators. The coulombic efficiency (CE) of the Li-S battery using the SbNs/separator after the initial cycle is close to 100% at a current density of 0.1 A g-1, and 660 mA h g-1 capacity retained after 100 cycles. The rate capability of Li-S battery using SbNs/separator delivers a reversible capacity of 425 mA h g-1 when the current density increases to 1 A g-1. The improved electrochemical performance is mainly attributed to the following reasons. Firstly, the combination of physical adsorption and chemical bonding between SbNs and lithium polysulfides (LiPSs), which efficiently inhibits the shuttle phenomena of LiPSs. Secondly, the good electronic conductivity of SbNs improves the utilization of the adsorbed LiPSs, which benefits the capacity release of active materials. Lastly, the fast conversion kinetics of intermediate LiPSs caused by the catalytic effect from SbNs further suppresses the shuttle effect of LiPSs. The SbNs/separators exhibit a great potential for the future high-performance Li-S batteries.

| S-EPMC8694926 | biostudies-literature

Dunaliella Salinas based Sn-carbon anode for high-performance Li-ion batteries.

Project description:Long life, high capacity, environmental friendliness and good rate performance are the most important elements in the research of lithium ion batteries (LIBs). In this paper, Sn-carbon composite electrode materials are prepared using Dunaliella Salinas based carbon (amorphous carbon) as an amorphous carbon precursor combined with tin. Hence, an amorphous carbon template enwrapped by Sn particles forms a core-shell structure (Sn-carbon composite), the annealed Dunaliella Salinas based carbon makes up the carbon core, and Sn particles form the shell of the material. The components of the materials, microstructure and electrochemical properties of LIBs were characterized and tested. The results show that the prepared Sn-carbon composite electrode materials have high purity and combine with amorphous carbon uniformly. The Sn-carbon composite exhibits excellent performance as a LIB anode, its discharge capacities of the 1st, 2nd, and 4th cycles are 1777.39, 944.15 and 722.46 mA h g-1 at a current density of 100 mA g-1, and the capacity is 619.09 mA h g-1 after stable cycling at a current density of 200 mA g-1. The capacity continues to rise at a high current density of 1000 mA g-1 and is 574.97 mA h g-1 at its maximum, demonstrating the excellent performance of the electrode.

| S-EPMC9044169 | biostudies-literature

Role of polyvinylpyrrolidone in the electrochemical performance of Li2MnO3 cathode for lithium-ion batteries.

Project description:While Li2MnO3 as an over-lithiated layered oxide (OLO) shows a significantly high reversible capacity of 250 mA h g-1 in lithium-ion batteries (LIBs), it has critical issues of poor cycling performance and deteriorated high rate performance. In this study, modified OLO cathode materials for improved LIB performance were obtained by heating the as-prepared OLO at different temperatures (400, 500, and 600 °C) in the presence of polyvinylpyrrolidone (PVP) under an N2 atmosphere. Compared to the as-prepared OLO, the OLO sample heated at 500 °C with PVP exhibited a high initial discharge capacity of 206 mA h g-1 and high rate capability of 111 mA h g-1 at 100 mA g-1. The superior performance of the OLO sample heated at 500 °C with PVP is attributed to an improved electronic conductivity and Li+ ionic motion, resulting from the formation of the graphitic carbon structure and increased Mn3+ ratio during the decomposition of PVP.

| S-EPMC9062368 | biostudies-literature

Electrochemical properties of cobalt hydroxychloride microspheres as a new anode material for Li-ion batteries.

Project description:The use of cobalt hydroxychloride [Co2(OH)3Cl] as an anode material for lithium ion batteries (LIBs) is investigated using spherical shape and ultrafine nanocrystals directly formed by spray pyrolysis from spray solution of cobalt chloride salt. Dot-mapping images of the resulting powders reveal a uniform distribution of Co, O, and Cl throughout the powder. The Co2(OH)3Cl powder prepared directly by spray pyrolysis exhibits a high thermal stability at temperatures below 220 °C, as well as having superior electrochemical properties compared with those of the CoCl2(H2O)2 and CoO powders prepared by the same process. The initial discharge capacities of the Co2(OH)3Cl and CoO powders at a constant current density of 1000 mA g(-1) are found to be 1570 and 1142 mA h g(-1), respectively, and their initial Coulombic efficiencies are 72 and 70%. The discharge capacities of the Co2(OH)3Cl and CoO powders after 100 cycles are 955 and 632 mA h g(-1), respectively. The Co2(OH)3Cl powders have a high discharge capacity of 609 mA h g(-1) even after 1000 cycles at a high current density of 5000 mA g(-1).

| S-EPMC4148658 | biostudies-literature

Enhanced electrochemical properties of cellular CoPS@C nanocomposites for HER, OER and Li-ion batteries.

Project description:Cellular CoPS@C nanocomposites were successfully synthesized via a facile two-steps route. The performances of the CoPS@C electrode as a non-noble metal electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) show good activity. On the other hand, the electrochemical investigation of CoPS systems for lithium ion batteries (LIBs) is reported for the first time. The CoPS@C nanocomposite as a novel anode can maintain a capacity of about 713 mA h g-1 after 50 cycles at a current density of 0.2 A g-1, indicating its potential applications in lithium storage. Test results also demonstrate that the CoPS@C nanocomposite exhibit more excellent HER, OER and Li storage performances compared to the bulk CoPS sample.

| S-EPMC9064212 | biostudies-literature