Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Photodegradation Process of Organic Dyes in the Presence of a Manganese-Doped Zinc Sulfide Nanowire Photocatalyst.

ABSTRACT: Zinc sulfide (ZnS) nanowires represent a promising candidate in many fields, including optoelectronics and photocatalysis because of their advantages such as excellent optical properties, chemical stability and an easy-scalable simple synthesis method. In this study, an energy-friendly microwave radiation process was used to develop the single-step, solvothermal process for the growth of manganese-doped zinc sulfide (ZnS) and undoped nanocrystals (NCs) in the forms of nanowires using two short amines as a stabilizer, e.g. ethylenediamine and hydrazine, respectively. ZnS nanowires doped with Mn atoms show absorbance in UV and in the visible region of the spectrum. The photocatalytic degradation of rhodamine B in the presence of Mn-doped and undoped ZnS nanocrystals illuminated with only a 6-W UV lamp has been comprehensively studied. The effect of Mn doping and the presence of a nanocrystal stabilizer on the degradation process was determined. It was found that the efficiency of a photocatalytic degradation process was strongly affected by both factors: the doping process of nanowires with Mn²⁺ atoms and the attachment of ligands to the nanocrystal surface.

SUBMITTER: Zaba A

PROVIDER: S-EPMC8510231 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Facile Microwave-assisted Synthesis Manganese Doped Zinc Sulfide Nanoparticles.

Project description:Undoped and manganese doped zinc sulfide nanoparticles were produced by a fast, one-step and two-component microwave-assisted synthesis method. The solid phase retains around 78% of the initial Mn concentration, as revealed by Particle Induced X-ray Emission analysis. X-ray diffraction patterns confirmed zinc blende structure and in the transmission electron microscopy images, nanoparticles with triangular prism and cube shapes were observed, respectively with an average particle size around 7?nm and 13?nm. Dried powders of zinc sulfide nanoparticles, doped with 0.1?mol% and 0.7?mol% of Mn ions, show highest brilliance of luminescence under UV light. Increasing dopant levels resulted in a diminishing emission that vanishes above 4% of dopant concentration. The synthesis of ZnS was monitored and two main events were detected, one at 145?°C corresponding to the sol-gel phase formation and another after ~3?min at 300?°C where the precipitation of the zinc sulfide nanoparticles occurs.

| S-EPMC6207788 | biostudies-literature

High-quality manganese-doped zinc sulfide quantum rods with tunable dual-color and multiphoton emissions.

Project description:We report a simple, fast and green phosphine-free colloidal chemistry to synthesize high-quality wurtzite-type Mn-doped ZnS quantum rods (QRs) with tunable diameters (1.6-5.6 nm), high aspect ratios (up to 50), variable Mn doping levels (0.18-1.60%), and high quantum yields (up to 45%). The electron paramagnetic resonance spectra with modeling reveal the successful doping of paramagnetic Mn(2+) ions in the host ZnS QRs. The Mn-doped ZnS QRs demonstrate tunable dual-color (orange and blue) emissions by tuning the doping levels and UV excitation wavelengths. The orange emission with long decay lifetime (3.3 ms) originates from the doped Mn(2+) states, while the blue emission with fast decay lifetime (0.31 ns) is attributed to the QR surface states. The bright two- and three-photon excitation upconversion luminescence from the Mn-doped ZnS QRs have been observed using tunable near-infrared femtosecond laser. Our strategy provides a versatile route to programmably control the optical properties of anisotropic semiconductor nanomaterials, which may create new opportunities for photonic devices and bioimaging applications.

| S-EPMC3074539 | biostudies-literature

Artificial neural network modelling of photodegradation in suspension of manganese doped zinc oxide nanoparticles under visible-light irradiation.

Project description:The artificial neural network (ANN) modeling of m-cresol photodegradation was carried out for determination of the optimum and importance values of the effective variables to achieve the maximum efficiency. The photodegradation was carried out in the suspension of synthesized manganese doped ZnO nanoparticles under visible-light irradiation. The input considered effective variables of the photodegradation were irradiation time, pH, photocatalyst amount, and concentration of m-cresol while the efficiency was the only response as output. The performed experiments were designed into three data sets such as training, testing, and validation that were randomly splitted by the software's option. To obtain the optimum topologies, ANN was trained by quick propagation (QP), Incremental Back Propagation (IBP), Batch Back Propagation (BBP), and Levenberg-Marquardt (LM) algorithms for testing data set. The topologies were determined by the indicator of minimized root mean squared error (RMSE) for each algorithm. According to the indicator, the QP-4-8-1, IBP-4-15-1, BBP-4-6-1, and LM-4-10-1 were selected as the optimized topologies. Among the topologies, QP-4-8-1 has presented the minimum RMSE and absolute average deviation as well as maximum R-squared. Therefore, QP-4-8-1 was selected as final model for validation test and navigation of the process. The model was used for determination of the optimum values of the effective variables by a few three-dimensional plots. The optimum points of the variables were confirmed by further validated experiments. Moreover, the model predicted the relative importance of the variables which showed none of them was neglectable in this work.

| S-EPMC4236903 | biostudies-other

Fabrication of ZnO nanoparticles adorned nitrogen-doped carbon balls and their application in photodegradation of organic dyes.

Project description:In the present study, a novel ZnO nanoparticles adorned nitrogen-doped carbon balls (ZnO@CBs) were successfully synthesized from polybenzoxazine and ZnO nanoparticles through a simple carbonization method. The typical wurtzite hexagonal zinc oxide phase in ZnO@CBs and degree of graphitization were revealed by the X-ray diffraction pattern. The field emission scanning electron microscopy confirmed that the synthesized carbon materials have well dispersed ball-like structure, wherein, the ZnO nanoparticles are distributed evenly on the carbon balls (CBs). The synthesized ZnO@CBs with different wt.% (20, 40, 60 and 80) and bare ZnO nanoparticles were investigated for methylene blue (MB) dye degradation experiment. The synthesized ZnO@CBs exhibited high activity in the degradation of MB. Among the different wt.% of ZnO@CBs, 60 wt.% of ZnO@CBs showed the highest MB degradation ratio (99%) with a fast degradation rate (1.65% min-1) under the following optimum conditions: 20 mg of ZnO@CBs in 50 mL of MB solution at room temperature.

| S-EPMC6925138 | biostudies-literature

The Synthesis of Manganese Hydroxide Nanowire Arrays for a High-Performance Zinc-Ion Battery.

Project description:The morphology, microstructure as well as the orientation of cathodic materials are the key issues when preparing high-performance aqueous zinc-ion batteries (ZIBs). In this paper, binder-free electrode Mn(OH)2 nanowire arrays were facilely synthesized via electrodeposition. The nanowires were aligned vertically on a carbon cloth. The as-prepared Mn(OH)2 nanowire arrays were used as cathode to fabricate rechargeable ZIBs. The vertically aligned configuration is beneficial to electron transport and the free space between the nanowires can provide more ion-diffusion pathways. As a result, Mn(OH)2 nanowire arrays yield a high specific capacitance of 146.3 Ma h g-1 at a current density of 0.5 A g-1. They also demonstrates ultra-high diffusion coefficients of 4.5 × 10-8~1.0 × 10-9 cm2 s-1 during charging and 1.0 × 10-9~2.7 × 10-11 cm-2 s-1 during discharging processes, which are one or two orders of magnitude higher than what is reported in the studies. Furthermore, the rechargeable Zn//Mn(OH)2 battery presents a good capacity retention of 61.1% of the initial value after 400 cycles. This study opens a new avenue to boost the electrochemical kinetics for high-performance aqueous ZIBs.

| S-EPMC9331603 | biostudies-literature

Microfluidic Crystallization of Surfactant-Free Doped Zinc Sulfide Nanoparticles for Optical Bioimaging Applications.

Project description:The room-temperature controlled crystallization of monodispersed ZnS nanoparticles (average size of 5 nm) doped with luminescent ions (such as Mn2+, Eu3+, Sm3+, Nd3+, and Yb3+) was achieved via a microfluidic approach. The preparation did not require any stabilizing ligands or surfactants, minimizing potential sources of impurities. The synthesized nanomaterials were characterized from a structural (XRD and XAS at lanthanide L3 edges), morphological (TEM), and compositional (XPS, ICP-MS) perspective, giving complementary information on the materials' features. In view of potential applications in the field of optical bioimaging, the optical emission properties of the doped nanoparticles were assessed, and samples showed strong luminescent properties while being less affected by self-quenching mechanisms. Furthermore, in vitro cytotoxicity experiments were conducted, showing no negative effects and evidencing the appeal of the synthesized materials for potential applications in the field of optical bioimaging.

| S-EPMC8011799 | biostudies-literature

Straightforward Synthesis of Mn3O4/ZnO/Eu2O3-Based Ternary Heterostructure Nano-Photocatalyst and Its Application for the Photodegradation of Methyl Orange and Methylene Blue Dyes.

Project description:Zinc oxide-ternary heterostructure Mn3O4/ZnO/Eu2O3 nanocomposites were successfully prepared via waste curd as fuel by a facile one-pot combustion procedure. The fabricated heterostructures were characterized utilizing XRD, UV-Visible, FT-IR, FE-SEM, HRTEM and EDX analysis. The photocatalytic degradation efficacy of the synthesized ternary nanocomposite was evaluated utilizing model organic pollutants of methylene blue (MB) and methyl orange (MO) in water as examples of cationic dyes and anionic dyes, respectively, under natural solar irradiation. The effect of various experimental factors, viz. the effect of a light source, catalyst dosage, irradiation time, pH of dye solution and dye concentration on the photodegradation activity, was systematically studied. The ternary Mn3O4/ZnO/Eu2O3 photocatalyst exhibited excellent MB and MO degradation activity of 98% and 96%, respectively, at 150 min under natural sunlight irradiation. Experiments further conclude that the fabricated nanocomposite exhibits pH-dependent photocatalytic efficacy, and for best results, concentrations of dye and catalysts have to be maintained in a specific range. The prepared photocatalysts are exemplary and could be employed for wastewater handling and several ecological applications.

| S-EPMC8347762 | biostudies-literature

Synthesis of a Zinc Oxide Nanoflower Photocatalyst from Sea Buckthorn Fruit for Degradation of Industrial Dyes in Wastewater Treatment.

Project description:: Green synthesis of ZnO nanoparticles has attracted research attention as a sustainable method of avoiding the destructive effect of chemicals. We synthesized a flower-shaped zinc oxide (ZnO) nanoflower (NF) from sea buckthorn fruit (SBT) by co-precipitation and characterized it using X-ray powder diffraction (XRD), X-ray photo electronic microscopy (XPS), photoluminescence (PL), field emission transmission electron microscopy (FE-TEM), and Fourier-transform infrared (FT-IR) spectroscopy. The ability of the ZnO/NF to degrade cationic and anionic dyes, including malachite green (MG), Congo red (CR), methylene blue (MB), and eosin Y (EY), under ultraviolet illumination was studied. The photocatalyst degraded approximately 99% of the MG, MB, CR and EY dyes within 70, 70, 80, and 90 min of contact time, respectively, at a dye concentration of 15 mg/L, 5 mg/L, SBT-ZnO/NF degraded 100% of the MG, MB, CR and EY dyes within 23, 25, 28, and 30 min, respectively. The results indicate that SBT-ZnO/NFs as synthesized is an inexpensive, non-toxic, rapid, and reusable photocatalyst that can play an enhanced role in wastewater treatment.

| S-EPMC6970228 | biostudies-literature

Biogenic Control of Manganese Doping in Zinc Sulfide Nanomaterial Using <i>Shewanella oneidensis</i> MR-1.

Project description:Bacteria naturally alter the redox state of many compounds and perform atom-by-atom nanomaterial synthesis to create many inorganic materials. Recent advancements in synthetic biology have spurred interest in using biological systems to manufacture nanomaterials, implementing biological strategies to specify the nanomaterial characteristics such as size, shape, and optical properties. Here, we combine the natural synthetic capabilities of microbes with engineered genetic control circuits toward biogenically synthesized semiconductor nanomaterials. Using an engineered strain of Shewanella oneindensis with inducible expression of the cytochrome complex MtrCAB, we control the reduction of manganese (IV) oxide. Cytochrome expression levels were regulated using an inducer molecule, which enabled precise modulation of dopant incorporation into manganese doped zinc sulfide nanoparticles (Mn:ZnS). Thereby, a synthetic gene circuit controlled the optical properties of biogenic quantum dots. These biogenically assembled nanomaterials have similar physical and optoelectronic properties to chemically synthesized particles. Our results demonstrate the promise of implementing synthetic gene circuits for tunable control of nanomaterials made by biological systems.

| S-EPMC6514046 | biostudies-literature

Angle-dependent photodegradation over ZnO nanowire arrays on flexible paper substrates.

Project description:In this study, we grew zinc oxide (ZnO) nanowire arrays on paper substrates using a two-step growth strategy. In the first step, we formed single-crystalline ZnO nanoparticles of uniform size distribution (ca. 4 nm) as seeds for the hydrothermal growth of the ZnO nanowire arrays. After spin-coating of these seeds onto paper, we grew ZnO nanowire arrays conformally on these substrates. The crystal structure of a ZnO nanowire revealed that the nanowires were single-crystalline and had grown along the c axis. Further visualization through annular bright field scanning transmission electron microscopy revealed that the hydrothermally grown ZnO nanowires possessed Zn polarity. From photocatalytic activity measurements of the ZnO nanowire (NW) arrays on paper substrate, we extracted rate constants of 0.415, 0.244, 0.195, and 0.08 s(-1) for the degradation of methylene blue at incident angles of 0°, 30°, 60°, and 75°, respectively; that is, the photocatalytic activity of these ZnO nanowire arrays was related to the cosine of the incident angle of the UV light. Accordingly, these materials have promising applications in the design of sterilization systems and light-harvesting devices.

| S-EPMC4273692 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data