Nanomagnetite- and Nanotitania-Incorporated Polyacrylonitrile Nanofibers for Simultaneous Cd(II)- and As(V)-Ion Removal Applications
Ontology highlight
ABSTRACT:
SUBMITTER: Siriwardane I
PROVIDER: S-EPMC8552354 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Functionalization and morphological construction can promote lithium-ion storage performance of organic polymers. In this contribution, exceptional lithium ion storage performance is empowered to porous polyacrylonitrile (PAN) nanofibers via the integration of template-assisted electrospinning technology and thermal treatment. It is found that the atmosphere adopted during the annealing process controls the storage behaviors of Li+. Impressively, the samples annealed in air present competitive capacities, rate capabilities, and a stable lifetime, compared with other counterparts (PAN powders and PAN fibers treated in N2). Such enhancement in performance is attributed to the enriched oxygen-based functionalities (mainly C=O group) which guarantee a high specific capacity and the porous structure which facilitates the transportation of Li+ and electrons to improve the rate capability. It is envisioned that such morphology control and surface functionalization open up new horizons in the development of organic electrode materials with enhanced lithium-ion storage performances.
| S-EPMC7859936 | biostudies-literature
Project description:Toward the objective of developing platform technologies for anti-infective materials based upon photodynamic inactivation, we employed electrospinning to prepare a non-woven textile comprised of polyacrylonitrile nanofibers embedded with a porphyrin-based cationic photosensitizer; termed PAN-Por(+). Photosensitizer loading was determined to be 34.8 nmol/mg material; with thermostability to 300 °C. Antibacterial efficacy was evaluated against four bacteria belonging to the ESKAPE family of pathogens (Staphylococcus aureus; vancomycin-resistant Enterococcus faecium; Acinetobacter baumannii; and Klebsiella pneumonia), as well as Escherichia coli. Our results demonstrated broad photodynamic inactivation of all bacterial strains studied upon illumination (30 min; 65 ± 5 mW/cm²; 400-700 nm) by a minimum of 99.9996+% (5.8 log units) regardless of taxonomic classification. PAN-Por(+) also inactivated human adenovirus-5 (~99.8% reduction in PFU/mL) and vesicular stomatitis virus (>7 log units reduction in PFU/mL). When compared to cellulose-based materials employing this same photosensitizer; the higher levels of photodynamic inactivation achieved here with PAN-Por(+) are likely due to the combined effects of higher photosensitizer loading and a greater surface area imparted by the use of nanofibers. These results demonstrate the potential of photosensitizer-embedded polyacrylonitrile nanofibers to serve as scalable scaffolds for anti-infective or self-sterilizing materials against both bacteria and viruses when employing a photodynamic inactivation mode of action.
| S-EPMC5302559 | biostudies-literature
Project description:The fabrication of polymeric nanofibers and its potential versatility instigated to foster smart hybrid nanomaterials for the removal of environmental pollutants. In this pursuit, in this research work, polyacrylonitrile (PAN)-based two-dimensional (2D) nanofibrous mats with polyethyleneimine (PEI)/Fe and quaternary ammonium (QA)/Fe as hybrid fillers were prepared by the electrospinning process for the effective dye removal and bacterial disinfection. The characteristics of the fabricated nanomaterials were extensively explored by several analytical techniques such as field emission-scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and Brunauer-Emmett-Teller analysis. Magnetic and thermal properties were investigated by superconducting quantum interference device and thermogravimetric measurements. The kinetic and isothermal models affirmed the adsorption behavior of the PAN-PEI/Fe nanofibers, and further regenerative studies substantiated the sustainability of the mats for the removal of industrial dye effluents. Subsequently, the magnetic-QA-loaded PAN nanofiber mats exhibited bactericidal killing efficacy of 99 and 89.5% in both Staphylococcus aureus and green fluorescence protein expressing Escherichia coli bacterial models evaluated from the conventional quantitative bacterial colony-counting assay. Disk diffusion method and microscopic investigations corroborated the disinfection efficacy with zone of inhibitions of ∼23 and 33 mm, respectively. Interestingly, in vitro cell culture studies conducted in BHK-21 and NIH 3T3 cell lines demonstrated the cytocompatibility, and the in vivo toxicity investigations using the zebrafish models necessitated the real-time application of these nanofibrous mats. Therefore, the comprehensive study of the fabricated PAN-templated functionalized 2D nanofibrous mats affirmed to be competent for the remediation of industrial dye effluents and bacteria in water bodies.
| S-EPMC6044827 | biostudies-literature
Project description:Carbon nanofiber nonwovens are promising materials for electrode or filtration applications; however, their utilization is obviated by a lack of high throughput production methods. In this study, we utilize a highly effective high-throughput method for the fabrication of polyacrylonitrile (PAN) nanofibers as a nonwoven on a dedicated substrate. The method employs rotational-, air pressure- and electrostatic forces to produce fibers from the inner edge of a rotating bell towards a flat collector. We investigate the impact of all above-mentioned forces on the fiber diameter, morphology, and bundling of the carbon-precursor PAN fibers. The interplay of radial forces with collector-facing forces has an influence on the uniformity of fiber deposition. Finally, the obtained PAN nanofibers are converted to carbon nonwovens by thermal treatment.
| S-EPMC8072871 | biostudies-literature
Project description:The rapid increase of industrial activities leads to serious environmental pollution, especially, in aqueous systems and particularly with heavy metals. Cadmium, one of the most poisonous elements, is rapidly accumulated in the human body, therefore, the efficient removal of cadmium ions from wastewater is an urgent need. Coordination networks (CNs) and its subdivision metal-organic frameworks (MOFs), are structured porous composites which present various special properties. In this work two CNs were used as adsorbent materials for the removal of Cd(II) ions from aqueous solutions. By the reaction of CoSO4·7H2O and NiSO4·7H2O with N,N-bis(phosphonomethyl)glycine (Gly) in hydrothermal conditions two CNs-Co-Gly and Ni-Gly- were synthesized, respectively. Cadmium adsorption onto the studied CNs was conducted in batch mode, and the effect of pH, initial concentration, contact time, temperature and sorbent weight on the sorption process were investigated. Parametric Method 3 (PM3)semi-empirical analyses of the CNs' structural properties were performed in order to predict the adsorption properties. For this reason, two octahedral models were calculated and computational predictions were compared with the experimental results. Both computational and experimental adsorption studies found that Ni-Gly presents higher affinity for cadmium ions. Moreover, the adsorbent materials can be readily regenerated and recycled without significant loss of cadmium uptake capacity.
| S-EPMC7279495 | biostudies-literature
Project description:Remediation of soil heavy metal by biochar has been extensively studied. However, few studies focused on the role of biochar on the co-immobilization of cadmium (Cd(II)) and arsenate (As(V)) and related soil nutrient availability. Remediation tests were conducted with three types of pristine and ferric trichloride (FeCl3) modified biochar (rice, wheat, and corn straw biochar) in Cd-As co-contaminated soil, with application rates of 1, 5, and 10% (w/w) and the incubation of 1, 7, 10, and 15 days. Using TCLP (Toxicity Characteristic Leaching Procedure) method, 10% of FeCl3 modified corn-straw derived biochar (FCB) had the highest immobilization efficiency of Cd(II) (63.21%) and As(V) (95.10%) after 10 days of the incubation. Iron-modified biochar immobilized higher fractions of water-soluble (F1) and surface-absorbed (F2) metal fractions than pristine biochar. For FCB amendment, Cd was mostly presented in the organic matter (OM) and sulfides associated (F4) and residual (F5) fractions (88.52%), as was found in the Fe-Al (oxides and hydroxides) (F3), F4, and F5 fractions (75.87%). FCB amendment increased soil pH values and available iron contents (p < 0.05), while no changes in soil available phosphorus content (p > 0.05). This study showed that FCB application reduces the environmental mobility of metals in Cd-As contaminated soil, while it also increases soil pH and available nutrient mobility, improving soil environmental quality and reducing remediation costs.
| S-EPMC7037325 | biostudies-literature
Project description:The synergistic adsorption of heavy metal ions and humic acid can be very challenging. This is largely because of their competitive adsorption onto most adsorbent materials. Hierarchically structured composites containing polyethylenimine-modified magnetic mesoporous silica and graphene oxide (MMSP-GO) were here prepared to address this. Magnetic mesoporous silica microspheres were synthesized and functionalized with PEI molecules, providing many amine groups for chemical conjugation with the carboxyl groups on GO sheets and enhanced the affinity between the pollutants and the mesoporous silica. The features of the composites were characterized using TEM, SEM, TGA, DLS, and VSM measurements. Series adsorption results proved that this system was suitable for simultaneous and efficient removal of heavy metal ions and humic acid using MMSP-GO composites as adsorbents. The maximum adsorption capacities of MMSP-GO for Pb(II) and Cd (II) were 333 and 167 mg g(-1) caculated by Langmuir model, respectively. HA enhances adsorption of heavy metals by MMSP-GO composites due to their interactions in aqueous solutions. The underlying mechanism of synergistic adsorption of heavy metal ions and humic acid were discussed. MMSP-GO composites have shown promise for use as adsorbents in the simultaneous removal of heavy metals and humic acid in wastewater treatment processes.
| S-EPMC3679167 | biostudies-literature
Project description:Rare earth elements (REEs), which include lanthanides as yttrium and europium became crucial in the last decade in many sectors like automotive, energy, and defense. They contribute to the increment efficiency and performance of different products. In this paper nanofiber membranes have been successfully applied for the selective recovery of Eu(III) and Y(III) from aqueous solutions. Polyacrylonitrile (PAN) electrospun nanofibers were impregnated with a commercial organic extractant, Cyanex 272, in order to increase their affinity to rare earth metals ions. The coated nanofibers were characterized by SEM, ATR-FTIR, and TGA. Firstly, the adsorption of Eu(III) and Y(III) were evaluated in batch mode. Experimental data showed that the adsorption of Y(III) and Eu(III) corresponds to pseudo-second order model, with Langmuir sorption model being the best fit for both target ions. The results demonstrated that the adsorption capacity was high, showing a maximum capacity of 200 and 400 mg/g for Y(III) and Eu(III), respectively. Additionally, the presence of interfering ions does not show significative effects in the adsorption process. Finally, experiments in continuous mode indicated that the adsorption of the target elements is close to 100%, showing that PAN-272 is a promising material for the recovery of earth metal ions.
| S-EPMC6955798 | biostudies-literature
Project description:The pollution of Cadmium (Cd) species in natural water has attracted more and more attention due to its high cumulative toxicity. In the search for improved removal of cadmium from contaminated water, we characterized uptake on a recently identified nanomaterial (SiO2-Mg(OH)2) obtained by subjecting sepiolite to acid-base modification. The structural characteristics of SiO2-Mg(OH)2 were analyzed by means of SEM-EDS, Fourier Transform Infra-Red Spectroscopy (FTIR) and Powder X-ray Diffraction (PXRD). Static adsorption experiments were carried out to evaluate the effect of contact time, temperature, amount of adsorbent, and pH-value on the adsorption of Cd(II) by SiO2-Mg(OH)2. The results show that the pore structure of SiO2-Mg(OH)2 is well developed, with specific surface area, pore size and pore volume increased by 60.09%, 16.76%, and 43.59%, respectively, compared to natural sepiolite. After modification, the sepiolite substrate adsorbs Cd(II) following pseudo-second-order kinetics and a Langmuir surface adsorption model, suggesting both chemical and physical adsorption. At 298 K, the maximum saturated adsorption capacity fitted by Sips model of SiO2-Mg(OH)2 regarding Cd(II) is 121.23 mg/g. The results show that SiO2-Mg(OH)2 nanocomposite has efficient adsorption performance, which is expected to be a remediation agent for heavy metal cadmium polluted wastewater.
| S-EPMC7178199 | biostudies-literature
Project description:This paper reports the carbon quantum dots-doped magnetic electrospinning nanofibers for the self-display and removal of Hg(II) ions from water. The fluorescent carbon quantum dots and magnetic Fe3O4 nanoparticles were pre-prepared successfully, and they appeared to be homogeneously dispersed in nanofibers via electrospinning. During the sorption of Hg(II) ions, the significant fluorescence signals of nanofibers gradually declined and exhibited a good linear relationship with cumulative adsorption capacity, which could be easily recorded by the photoluminescence spectra. The sorption performance of mercury ions onto the nanofibers was investigated in terms of different experimental factors including contact time, solution pH value, and initial ion concentration. Considering the actual parameters, the nanofibers were sensitive self-display adsorption system for Hg(II) ions in the existence of other cation. The sorption data were described by different kinetic models, which indicate that the whole sorption was controlled by chemical adsorption. The intraparticle diffusion mass transfer was not obvious in this system, which further proved the uniform adsorption and even fluorescence quenching in nanofibers. Additionally, the nanocomposite fiber could regenerate in several cycles with no significant loss of adsorption capacity and fluorescence intensity. Thus, the nanofibers are promising alternatives for environmental pollution incidents. It is especially competent due to its high efficiency for self-display and removal of high concentration of mercury ions.
| S-EPMC6641464 | biostudies-literature