Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Self-wetting triphase photocatalysis for effective and selective removal of hydrophilic volatile organic compounds in air

ABSTRACT: Photocatalytic air purification is widely regarded as a promising technology, but it calls for more efficient photocatalytic materials and systems. Here we report a strategy to introduce an in-situ water (self-wetting) layer on WO3 by coating hygroscopic periodic acid (PA) to dramatically enhance the photocatalytic removal of hydrophilic volatile organic compounds (VOCs) in air. In ambient air, water vapor is condensed on WO3 to make a unique tri-phasic (air/water/WO3) system. The in-situ formed water layer selectively concentrates hydrophilic VOCs. PA plays the multiple roles as a water-layer inducer, a surface-complexing ligand enhancing visible light absorption, and a strong electron acceptor. Under visible light, the photogenerated electrons are rapidly scavenged by periodate to produce more •OH. PA/WO3 exhibits excellent photocatalytic activity for acetaldehyde degradation with an apparent quantum efficiency of 64.3% at 460 nm, which is the highest value ever reported. Other hydrophilic VOCs like formaldehyde that are readily dissolved into the in-situ water layer on WO3 are also rapidly degraded, whereas hydrophobic VOCs remain intact during photocatalysis due to the “water barrier effect”. PA/WO3 successfully demonstrated an excellent capacity for degrading hydrophilic VOCs selectively in wide-range concentrations (0.5−700 ppmv). Photocatalytic air purification is promising but it calls for more efficient photocatalytic materials and systems. Here, the authors report a strategy to introduce an in-situ water layer on WO3 by coating hygroscopic periodic acid that effectively remove hydrophilic volatile organic compounds.

SUBMITTER: He F

PROVIDER: S-EPMC8556241 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Nanostructured micro/mesoporous graphene: removal performance of volatile organic compounds.

Project description:In this study, we demonstrate an integrated synthesis strategy, which is conducted by the thermochemical process, consisting of pre- and post-activation by thermal treatment and KOH activation for the reduction of graphite oxide. A large number of interconnected pore networks with a micro/mesoporous range were constructed on a framework of graphene layers with a specific surface area of up to 1261 m2 g-1. This suggests a synergistic effect of thermally exfoliated graphene oxide (TEGO) on the removal efficiency of volatile organic compounds by generating pore texture with aromatic adsorbates such as benzene, toluene, and o-xylene (denoted as BTX) from an inert gaseous stream concentration of 100 ppm. As a proof of concept, TEGO, as well as pre- and post-activated TEGO, were used as adsorbents in a self-designed BTX gas adsorption apparatus, which exhibited a high removal efficiency of up to 98 ± 2%. The distinctive structure of TEGO has a significant effect on removal performance, which will greatly facilitate the strategy of efficient VOC removal configurations.

| S-EPMC9105649 | biostudies-literature

Efficient Removal of Volatile Organic Compounds by FAU-Type Zeolite Coatings.

Project description:Silicone and pure organic binders were used to develop FAU-type zeolite coatings applied on pre-treated aluminum substrates by using a spraying method and then cured under specific conditions. The influence of the amount of binder on adhesion properties of zeolite coatings was first investigated to determine the optimum ratio between zeolite and binder. Zeolite coatings were then elaborated with a high zeolite content (between 70 and 80 wt.%) to ensure high adsorption capacities. The amount of binders involved in different zeolite coatings was sufficient to achieve interesting adhesion and cohesion properties. The accessibility of zeolite microporosity was studied by nitrogen adsorption-desorption measurements, which revealed a very small or no loss of the micropore volume for the optimized coatings. Volatile Organic Compounds (VOCs) adsorption measurements were carried out using n-hexane as probe molecule. FAU-type zeolite in powder form adsorbs 180 mg/ganhydrous zeolite, whereas the amounts of n-hexane adsorbed by zeolite coatings ranged from 131 to 175 mg/ganhydrous zeolite.

| S-EPMC7435809 | biostudies-literature

Evaluation of Coriolis Micro Air Sampling to Detect Volatile and Semi-Volatile Organic Compounds.

Project description:There are several analytical procedures available for the monitoring of volatile organic compounds (VOCs) in the air, which differ mainly on sampling procedures. The Coriolis micro air sampler is a tool normally designed for biological air sampling. In this paper, the Coriolis micro bio collector is used to evaluate its ability to sample organic contaminants sampling and detecting them when combined GC-MS. We also compare the use of the Coriolis micro with a standardized sampling method, which is the use of a lung box with a Nalophan® bag. The results show that the Coriolis micro sampling method is suitable for the sampling of organic contaminants. Indeed, the Coriolis micro allows to sample and detect mainly semi-volatile molecules, while the lung box/Nalophan® bags allow to sample more volatile molecules (highly volatile and volatile). These results were confirmed in the controlled air lab with a slight difference with the field. The simultaneous use of the both techniques allow to sample and detect a larger number of molecules with specific physicochemical properties to each sampling technique. In conclusion, the Coriolis micro can sample and detect volatile organic compounds present in air. We have shown that the development of alternative sampling methods and the use of non-target analysis are essential for a more comprehensive risk assessment. Moreover, the use of the Coriolis micro allows the detection of emergent molecules around the Thau lagoon.

| S-EPMC9572053 | biostudies-literature

Low-cost FloPump for regulated air sampling of volatile organic compounds.

Project description:PremiseWe present a low-cost, battery-operated, portable pump, "FloPump," which allows regulated air sampling for the study of volatile organic compounds (VOCs). VOCs are routinely investigated in applications such as atmospheric chemistry, agriculture, and fragrance biology.Methods and resultsWe compared the performance of FloPump with the Supelco pump in collecting VOCs using two test samples: guava fruit (Psidium guajava) and a perfume. The sampling and identification of volatiles was carried out using a dynamic headspace sampling method followed by gas chromatography-mass spectrometry. We show that the sampling efficiency of FloPump is comparable to the commercial pump, and at an affordable cost of ~US$115 (~86% cheaper), it provides a viable option for researchers interested in sampling volatiles on a constrained budget.ConclusionsAccurate air sampling is critical for the study of VOCs. We propose that FloPump will make air sampling more affordable, thus encouraging studies of VOCs.

| S-EPMC7186897 | biostudies-literature

Selective Detection of Target Volatile Organic Compounds in Contaminated Humid Air Using a Sensor Array with Principal Component Analysis.

Project description:We investigated selective detection of the target volatile organic compounds (VOCs) nonanal, n-decane, and acetoin for lung cancer-related VOCs, and acetone and methyl i-butyl ketone for diabetes-related VOCs, in humid air with simulated VOC contamination (total concentration: 300 μg/m³). We used six "grain boundary-response type" sensors, including four commercially available sensors (TGS 2600, 2610, 2610, and 2620) and two Pt, Pd, and Au-loaded SnO₂ sensors (Pt, Pd, Au/SnO₂), and two "bulk-response type" sensors, including Zr-doped CeO₂ (CeZr10), i.e., eight sensors in total. We then analyzed their sensor signals using principal component analysis (PCA). Although the six "grain boundary-response type" sensors were found to be insufficient for selective detection of the target gases in humid air, the addition of two "bulk-response type" sensors improved the selectivity, even with simulated VOC contamination. To further improve the discrimination, we selected appropriate sensors from the eight sensors based on the PCA results. The selectivity to each target gas was maintained and was not affected by contamination.

| S-EPMC5539780 | biostudies-other

Effective removal of aromatic pollutants <i>via</i> adsorption and photocatalysis of porous organic frameworks.

Project description:PAF-45 with a wholly aromatic framework, intrinsic microporosity and π-π conjugation system shows excellent performance in aromatic pollutant removal. It exhibits a high adsorption capacity for the benzene series and moderate photocatalytic performance. As an adsorbent, PAF-45 can adsorb 35 wt% benzene and 68 wt% chlorobenzene in static adsorption experiments at room temperature and pressure. In benzene simulation wastewater, PAF-45 also shows excellent adsorption capacity, without significant reduction after 10 cycles of the adsorption-desorption process. Moreover, PAF-45 exhibits an impressive photocatalytic degradability of aromatic compounds, like aniline and phenol, under visible light illumination.

| S-EPMC9056622 | biostudies-literature

Visualising household air pollution: Colorimetric sensor arrays for monitoring volatile organic compounds indoors.

Project description:Indoor air quality monitoring as it relates to the domestic setting is an integral part of human exposure monitoring and health risk assessment. Hence there is a great need for easy to use, fast and economical indoor air quality sensors to monitor the volatile organic compound composition of the air which is known to be significantly perturbed by the various source emissions from activities in the home. To meet this need, paper-based colorimetric sensor arrays were deployed as volatile organic compound detectors in a field study aiming to understand which activities elicit responses from these sensor arrays in household settings. The sensor array itself is composed of pH indicators and aniline dyes that enable molecular recognition of carboxylic acids, amines and carbonyl-containing compounds. The sensor arrays were initially deployed in different rooms in a single household having different occupant activity types and levels. Sensor responses were shown to differ for different room settings on the basis of occupancy levels and the nature of the room emission sources. Sensor responses relating to specific activities such as cooking, cleaning, office work, etc were noted in the temporal response. Subsequently, the colorimetric sensor arrays were deployed in a broader study across 9 different households and, using multivariate analysis, the sensor responses were shown to correlate strongly with household occupant activity and year of house build. Overall, this study demonstrates the significant potential for this type of simple approach to indoor air pollution monitoring in residential environments.

| S-EPMC8494322 | biostudies-literature

The selective flow of volatile organic compounds in conductive polymer-coated microchannels.

Project description:Many gaseous markers of critical biological, physicochemical, or industrial occurrences are masked by the cross-sensitivity of the sensors to the other active components present at higher concentrations. Here, we report the strongly selective diffusion and drift of contaminant molecules in air-filled conductive polymer-coated microfluidic channels for the first time. Monitoring the passage of different target molecules through microchannels coated with Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) revealed that contaminants such as hexane, benzene, and CO pass through the channel unaffected by the coating while methanol, ethanol, and partly acetone are blocked. The observations are explained with reference to the selective interactions between the conductive polymer surface and target gas molecules amplified by the large wall/volume ratio in microchannels. The accumulated quantitative data point at the hydrogen bonding as the mechanism of wall adsorption; dipole-dipole interactions are relatively insignificant. The presented model facilitates a better understanding of how the conductive polymer-based chemical sensors operate.

| S-EPMC5304218 | biostudies-literature

Facile synthesis of magnesium-based metal-organic framework with tailored nanostructure for effective volatile organic compounds adsorption.

Project description:A novel Mg(II) metal-organic framework (Mg-MOF) was synthesized based on the ligand of 2,2'-bipyridine-4,4'-dicarboxylic acid. Single-crystal X-ray structural analysis confirmed that three-dimensional-nanostructure Mg-MOFs formed a monoclinic system with a channel size of 15.733 Å × 23.736 Å. N2 adsorption isotherm, Fourier transform infrared spectroscopy, thermogravimetric analysis and high-resolution transmission electron microscopy were performed to characterize the thermal stability and purity of the Mg-MOFs. The adsorption studies on four typical volatile organic compounds (VOCs) emitted during wood drying showed that Mg-MOFs have noteworthy adsorption capacities, especially for benzene and β-pinene with adsorptions of 182.26 mg g-1 and 144.42 mg g-1, respectively. In addition, the adsorption of Mg-MOFs mainly occurred via natural adsorption, specifically, multi-layer physical adsorption, accompanied by chemical forces, which occurred in the pores where the VOCs molecules combined with active sites. As an adsorbent, Mg-MOFs exhibit versatile behaviour for toxic gas accumulation.

| S-EPMC8965413 | biostudies-literature

Arabidopsis thaliana seedlings: Control vs Erwinia amylovora nicrobial Volatile Organic Compounds

Project description:Arabidopsis seedling were exposed in co-culture to E. amylovora mVOC and data show that mVOCs promote plant growth and early responses

2023-04-04 | GSE223760 | GEO

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data