Browse
Submit Data
Databases
API
Help

Dataset Information

16 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Oscillations of a soft viscoelastic drop

ABSTRACT: A soft viscoelastic drop has dynamics governed by the balance between surface tension, viscosity, and elasticity, with the material rheology often being frequency dependent, which are utilized in bioprinting technologies for tissue engineering and drop-deposition processes for splash suppression. We study the free and forced oscillations of a soft viscoelastic drop deriving (1) the dispersion relationship for free oscillations, and (2) the frequency response for forced oscillations, of a soft material with arbitrary rheology. We then restrict our analysis to the classical cases of a Kelvin–Voigt and Maxwell model, which are relevant to soft gels and polymer fluids, respectively. We compute the complex frequencies, which are characterized by an oscillation frequency and decay rate, as they depend upon the dimensionless elastocapillary and Deborah numbers and map the boundary between regions of underdamped and overdamped motions. We conclude by illustrating how our theoretical predictions for the frequency-response diagram could be used in conjunction with drop-oscillation experiments as a “drop vibration rheometer”, suggesting future experiments using either ultrasonic levitation or a microgravity environment.

SUBMITTER: Tamim S

PROVIDER: S-EPMC8563899 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Surface textures suppress viscoelastic braking on soft substrates.

Project description:A gravity-driven droplet will rapidly flow down an inclined substrate, resisted only by stresses inside the liquid. If the substrate is compliant, with an elastic modulus G < 100 kPa, the droplet will markedly slow as a consequence of viscoelastic braking. This phenomenon arises due to deformations of the solid at the moving contact line, enhancing dissipation in the solid phase. Here, we pattern compliant surfaces with textures and probe their interaction with droplets. We show that the superhydrophobic Cassie state, where a droplet is supported atop air-immersed textures, is preserved on soft textured substrates. Confocal microscopy reveals that every texture in contact with the liquid is deformed by capillary stresses. This deformation is coupled to liquid pinning induced by the orientation of contact lines atop soft textures. Thus, compared to flat substrates, greater forcing is required for the onset of drop motion when the soft solid is textured. Surprisingly, droplet velocities down inclined soft or hard textured substrates are indistinguishable; the textures thus suppress viscoelastic braking despite substantial fluid-solid contact. High-speed microscopy shows that contact line velocities atop the pillars vastly exceed those associated with viscoelastic braking. This velocity regime involves less deformation, thus less dissipation, in the solid phase. Such rapid motions are only possible because the textures introduce a new scale and contact-line geometry. The contact-line orientation atop soft pillars induces significant deflections of the pillars on the receding edge of the droplet; calculations confirm that this does not slow down the droplet.

| S-EPMC7768693 | biostudies-literature

Viscoelastic Effects on Drop Deformation Using a Machine Learning-Enhanced, Finite Element Method.

Project description:This paper presents a numerical study of the viscoelastic effects on drop deformation under two configurations of interest: steady shear flow and complex flow under gravitational effects. We use a finite element method along with Brownian dynamics simulation techniques that avoid the use of closed-form, constitutive equations for the "micro-"scale, studying the viscoelastic effects on drop deformation using an interface capturing technique. The method can be enhanced with a variance-reduced approach to the stochastic modeling, along with machine learning techniques to reconstruct the shape of the polymer stress tensor in complex problems where deformations can be dramatic. The results highlight the effects of viscoelasticity on shape, the polymer stress tensor, and flow streamlines under the analyzed configurations.

| S-EPMC7464509 | biostudies-literature

Single Microbubble Measurements of Lipid Monolayer Viscoelastic Properties for Small-Amplitude Oscillations.

Project description:Lipid monolayer rheology plays an important role in a variety of interfacial phenomena, the physics of biological membranes, and the dynamic response of acoustic bubbles and drops. We show here measurements of lipid monolayer elasticity and viscosity for very small strains at megahertz frequency. Individual plasmonic microbubbles of 2-6 ?m radius were photothermally activated with a short laser pulse, and the subsequent nanometer-scale radial oscillations during ring-down were monitored by optical scatter. This method provided average dynamic response measurements of single microbubbles. Each microbubble was modeled as an underdamped linear oscillator to determine the damping ratio and eigenfrequency, and thus the lipid monolayer viscosity and elasticity. Our nonisothermal measurement technique revealed viscoelastic trends for different lipid shell compositions. We observed a significant increase in surface elasticity with the lipid acyl chain length for 16 to 20 carbons, and this effect was explained by an intermolecular forces model that accounts for the lipid composition, packing, and hydration. The surface viscosity was found to be equivalent for these lipid shells. We also observed an anomalous decrease in elasticity and an increase in viscosity when increasing the acyl chain length from 20 to 22 carbons. These results illustrate the use of a novel nondestructive optical technique to investigate lipid monolayer rheology in new regimes of frequency and strain, possibly elucidating the phase behavior, as well as how the dynamic response of a microbubble can be tuned by the lipid intermolecular forces.

| S-EPMC5824650 | biostudies-literature

Designing polyHEMA substrates that mimic the viscoelastic response of soft tissue.

Project description:Matching the mechanical properties of a biomaterial to soft tissue is often overlooked despite the fact that it is well known that cells respond to and are capable of changing their mechanical environment. In this paper, we used NaCl and alginate beads as porogens to make a series of micro- and macro-porous pHEMA substrates (poly(2-hydroxyethly methacrylate)) and quantified their mechanical behavior under low-magnitude shear loads over physiologically relevant frequencies. Using a stress-controlled rheometer, we performed isothermal (37°C) frequency response experiments between 0.628 and 75.4rad/s (0.01-12Hz) at 0.1% strain. Both micro- and macro-porous pHEMA substrates were predominately elastic in nature with a narrow range of G' and G? values that mimicked the response of human skin. The magnitude of the G' and G? values of the macro-porous substrates were designed to closely match human skin. To determine how cell growth might alter their mechanical properties, pHEMA substrates were functionalized and human skin fibroblasts grown on them for fourteen days. As a result of cell growth, the magnitude of G' and G? increased at low frequencies while also altering the degree of high frequency dependence, indicating that cellular interactions with the micro-pore infrastructure has a profound effect on the viscoelastic behavior of the substrates. These data could be fit to a mathematical model describing a soft-solid. A quantitative understanding of the mechanical behavior of biomaterials in regimes that are physiologically relevant and how these mechanics may change after implantation may aid in the design of new materials.

| S-EPMC3110658 | biostudies-literature

Soft viscoelastic properties of nuclear actin age oocytes due to gravitational creep.

Project description:The actin cytoskeleton helps maintain structural organization within living cells. In large X. laevis oocytes, gravity becomes a dominant force and is countered by a nuclear actin network that prevents liquid-like nuclear bodies from immediate sedimentation and coalescence. However, nuclear actin's mechanical properties, and how they facilitate the stabilization of nuclear bodies, remain unknown. Using active microrheology, we find that nuclear actin forms a weak viscoelastic network, with a modulus of roughly 0.1 Pa. Embedded probe particles subjected to a constant force exhibit continuous displacement, due to viscoelastic creep. Gravitational forces also cause creep displacement of nuclear bodies, resulting in their asymmetric nuclear distribution. Thus, nuclear actin does not indefinitely support the emulsion of nuclear bodies, but only kinetically stabilizes them by slowing down gravitational creep to ~2 months. This is similar to the viability time of large oocytes, suggesting gravitational creep ages oocytes, with fatal consequences on long timescales.

| S-EPMC4649616 | biostudies-other

A hollow sphere soft lithography approach for long-term hanging drop methods.

Project description:In conventional hanging drop (HD) methods, embryonic stem cell aggregates or embryoid bodies (EBs) are often maintained in small inverted droplets. Gravity limits the volumes of these droplets to less than 50 microL, and hence such cell cultures can only be sustained for a few days without frequent media changes. Here we present a new approach to performing long-term HD methods (10-15 days) that can provide larger media reservoirs in a HD format to maintain more consistent culture media conditions. To implement this approach, we fabricated hollow sphere (HS) structures by injecting liquid drops into noncured poly(dimethylsiloxane) mixtures. These structures served as cell culture chambers with large media volumes (500 microL in each sphere) where EBs could grow without media depletion. The results showed that the sizes of the EBs cultured in the HS structures in a long-term HD format were approximately twice those of conventional HD methods after 10 days in culture. Further, HS cultures showed multilineage differentiation, similar to EBs cultured in the HD method. Due to its ease of fabrication and enhanced features, this approach may be of potential benefit as a stem cell culture method for regenerative medicine.

| S-EPMC2946882 | biostudies-other

Viscoelastic lithography for fabricating self-organizing soft micro-honeycomb structures with ultra-high aspect ratios.

Project description:High-aspect ratio micro- and nano-structures have been used for the production of a variety of applications. In this paper, we describe a simple and cost-effective approach to fabricate an arrayed microarchitecture with an ultra-high aspect ratio using soft materials. The shapes and sizes of the honeycomb structure can be easily modulated by changing the dimensions and position of the base mould pattern and the pressure. The honeycomb structure is used to prepare a drug delivery patch and a microwell array to form cell spheroids without cell loss. The honeycomb structures prepared using natural ECM (collagen-Matrigel) materials are successfully fabricated. The hepatocytes and endothelial cells are seeded and co-cultured in the ECM-based micro-honeycomb to prepare a 3D liver model successfully mimicking an ultrastructure of liver and providing enhanced liver function.

| S-EPMC4865738 | biostudies-literature

Experimental methods for the characterization of the frequency-dependent viscoelastic properties of soft materials.

Project description:A characterization method based on Rayleigh wave propagation was developed for the quantification of the frequency-dependent viscoelastic properties of soft materials at high frequencies; i.e., up to 4 kHz. Planar harmonic surface waves were produced on the surface of silicone rubber samples. The phase and amplitude of the propagating waves were measured at different locations along the propagation direction, which allowed the calculation of the complex Rayleigh wavenumbers at each excitation frequency using a transfer function method. An inverse wave propagation problem was then solved to obtain the complex shear/elastic moduli from the measured wavenumbers. In a separate, related investigation, dynamic indentation tests using atomic force microscopy (AFM) were performed at frequencies up to 300 Hz. No systematic verification study is available for the AFM-based method, which can be used when the dimensions of the test samples are too small for other existing testing methods. The results obtained from the Rayleigh wave propagation and AFM-based indentation methods were compared with those from a well-established method, which involves the generation of standing longitudinal compression waves in rod-shaped test specimens. The results were cross validated and qualitatively confirmed theoretical expectations presented in the literature for the frequency-dependence of polymers.

| S-EPMC3663851 | biostudies-other

Eccentric rheometry for viscoelastic characterization of small, soft, anisotropic, and irregularly shaped biopolymer gels and tissue biopsies.

Project description:Quantification of the physical properties of tissue biopsies and cell-remodeled hydrogels is critical for understanding tissue development and pathophysiological tissue remodeling. However, due to the low modulus, small size, irregular shape, and anisotropy of samples from these materials, accurate viscoelastic characterization using standard rheometric methods is problematic. The goal of this work is to utilize image analysis to extend rotational rheometry to these samples. In this method, the sample is offset to increase the torque generated; a custom clear glass geometry, right angle prism, and camera are used to determine the exact shape and location of the sample relative to the axis of rotation for calculation of the sample shear modulus, G'. Values of G' for standard polydimethylsiloxane gels tested in centered and eccentric configurations were not statistically different (respectively 137 ± 37 kPa and 126 ± 8 kPa, p = 0.58), indicating accuracy of the method. Additionally, G' values from circular and irregularly shaped collagen gels yielded equivalent results (31 ± 1.8 Pa and 31 ± 5.1 Pa, p = 0.29). A blood clot and a lipid plaque sample recovered from human patients (G' ~ 4 kPa) were successfully tested with this method demonstrating applicability to clinical diagnostics.

| S-EPMC3896300 | biostudies-literature

Integrating viscoelastic mass spring dampers into position-based dynamics to simulate soft tissue deformation in real time.

Project description:We propose a novel method to simulate soft tissue deformation for virtual surgery applications. The method considers the mechanical properties of soft tissue, such as its viscoelasticity, nonlinearity and incompressibility; its speed, stability and accuracy also meet the requirements for a surgery simulator. Modifying the traditional equation for mass spring dampers (MSD) introduces nonlinearity and viscoelasticity into the calculation of elastic force. Then, the elastic force is used in the constraint projection step for naturally reducing constraint potential. The node position is enforced by the combined spring force and constraint conservative force through Newton's second law. We conduct a comparison study of conventional MSD and position-based dynamics for our new integrating method. Our approach enables stable, fast and large step simulation by freely controlling visual effects based on nonlinearity, viscoelasticity and incompressibility. We implement a laparoscopic cholecystectomy simulator to demonstrate the practicality of our method, in which liver and gallbladder deformation can be simulated in real time. Our method is an appropriate choice for the development of real-time virtual surgery applications.

| S-EPMC5830759 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data