Browse
Submit Data
Databases
API
Help

Dataset Information

24 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Self-powered bifunctional sensor based on tribotronic planar graphene transistors

ABSTRACT: With the development of material science, micro-nano-fabrication and microelectronics, the higher level requirements are posed on the electronic skins (E-skin). The lower energy consumption and multiple functions are the imperative requirements to spurred scientists and mechanists to make joint efforts to meet. To achieve lower energy consumption, a promising energy-harvesting style of triboelectric nanogenerators (TENG) is incorporated into the field effect transistors (FETs) to play the important role for sensor. For bifunctional sensor, to harness the difficult for reflecting the magnitude of frequency, we resorted to synaptic transistors to achieve more intelligentization. Furthermore, with regards to the configuration of FET, we continued previous work: using the electrolyte gate dielectrics of FET—ion gel as the electrification layer to achieve high efficient, compact and extensively adoption for mechanosensation. The working principle of the GFET was based on the coupling effects of the FET and the TENG. This newly emerged self-powered sensor would offer a new platform for lower power consumption sensor for human–machine interface and intelligent robot.

SUBMITTER: Meng Y

PROVIDER: S-EPMC8563961 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Highly Stretchable Graphene Scrolls Transistors for Self-Powered Tribotronic Non-Mechanosensation Application.

Project description:Owing to highly desired requirements in advanced disease diagnosis, therapy, and health monitoring, noncontact mechanosensation active matrix has drawn considerable attention. To satisfy the practical demands of high energy efficiency, in this report, combining the advantage of multiparameter monitoring, high sensitivity, and high resolution of active matrix field-effect transistor (FET) with triboelectric nanogenerators (TENG), we successfully developed the tribotronic mechanosensation active matrix based on tribotronic ion gel graphene scrolls field-effect transistors (GSFET). The tribopotential produced by TENG served as a gate voltage to modulate carrier transport along the semiconductor channel and realized self-powered ability with considerable decreased energy consumption. To achieve high spatial utilization and more pronounced responsivity of the dielectric of this transistor, ion gel was used to act as a triboelectric layer to conduct friction and contact electrification with external materials directly to produce triboelectric charges to power GFET. This tribopotential-driving device has excellent tactile sensing properties with high sensitivity (1.125 mm-1), rapid response time (~16 ms), and a durability operation of thousands of cycles. Furthermore, the device was transparent and flexible with the capability of spatially mapping touch stimuli and monitoring real-time temperature. Due to all these unique characteristics, this novel noncontact mechanosensation GSFET active matrix provided a new method for self-powered E-skin with promising potential for self-powered wearable devices and intelligent robots.

| S-EPMC9920215 | biostudies-literature

Instantaneous Self-Powered Sensing System Based on Planar-Structured Rotary Triboelectric Nanogenerator.

Project description:Self-powering electronics by harvesting mechanical energy has been widely studied, but most self-powering processes require a long time in the energy harvesting procedure, resulting in low efficiency or even system failure in some specific applications such as instantaneous sensor signal acquisition and transmission. In order to achieve efficient self-powered sensing, we design and construct an instantaneous self-powered sensing system, which puts heavy requirements on generator's power and power management circuit. Theoretical analysis and experimental results over two types of generators prove that the planar-structured rotary triboelectric nanogenerator possesses many advantages over electromagnetic generator for the circumstances of instantaneous self-powering. In addition, an instantaneous driving mode power management circuit is also introduced showing advanced performance for the instantaneous self-powering sensing system. As a proof-of-concept, an integrated instantaneous self-powered sensing system is demonstrated based on Radio-Frequency transmission. This work demonstrates the potential of instantaneous self-powered sensing systems to be used in a wide range of applications such as smart home, environment monitoring, and security surveillance.

| S-EPMC8197852 | biostudies-literature

A Self-Powered Vector Angle/Displacement Sensor Based on Triboelectric Nanogenerator.

Project description:Recently, grating-structured triboelectric nanogenerators (TENG) operating in freestanding mode have been the subject of intensive research. However, standard TENGs based on interdigital electrode structures are unable to realize real-time sensing of the direction of the freestanding electrode movement. Here, a newly designed TENG, consisting of one group of grating freestanding electrodes and three groups of interdigitated induction electrodes with the identical period, has been demonstrated as a self-powered vector angle/displacement sensor (SPVS), capable of distinguishing the real-time direction of the freestanding electrode displacement. Thanks to the unique coupling effect between triboelectrification and electrostatic induction, periodic alternating voltage signals are generated in response to the rotation/sliding movement of the top freestanding electrodes on the bottom electrodes. The output peak-to-peak voltage of the SPVS can reach as high as 300 V at the rotation rate of 48 rpm and at the sliding velocity of 0.1 m/s, respectively. The resolution of the sensor reaches 8°/5 mm and can be further enhanced by decreasing the width of the electrodes. This present work not only demonstrates a novel method for angle/displacement detection but also greatly expands the applicability of TENG as self-powered vector sensors.

| S-EPMC7996610 | biostudies-literature

Self-powered thin-film motion vector sensor.

Project description:Harnessing random micromeso-scale ambient energy is not only clean and sustainable, but it also enables self-powered sensors and devices to be realized. Here we report a robust and self-powered kinematic vector sensor fabricated using highly pliable organic films that can be bent to spread over curved and uneven surfaces. The device derives its operational energy from a close-proximity triboelectrification of two surfaces: a polytetrafluoroethylene film coated with a two-column array of copper electrodes that constitutes the mover and a polyimide film with the top and bottom surfaces coated with a two-column aligned array of copper electrodes that comprises the stator. During relative reciprocations, the electrodes in the mover generate electric signals of ±5 V to attain a peak power density of ≥65 mW m(-2) at a speed of 0.3 ms(-1). From our 86,000 sliding motion tests of kinematic measurements, the sensor exhibits excellent stability, repeatability and strong signal durability.

| S-EPMC4557336 | biostudies-literature

Self-Powered Room-Temperature Ethanol Sensor Based on Brush-Shaped Triboelectric Nanogenerator.

Project description:Highly sensitive ethanol sensors have been widely utilized in environmental protection, industrial monitoring, and drink-driving tests. In this work, a fully self-powered ethanol detector operating at room temperature has been developed based on a triboelectric nanogenerator (TENG). The gas-sensitive oxide semiconductor is selected as the sensory component for the ethanol detection, while the resistance change of the oxide semiconductor can well match the "linear" region of the load characteristic curve of TENG. Hence, the output signal of TENG can directly reveal the concentration change of ethanol gas. An accelerator gearbox is applied to support the operation of the TENG, and the concentration change of ethanol gas can be visualized on the Liquid Crystal Display. This fully self-powered ethanol detector has excellent durability, low fabrication cost, and high selectivity of 5 ppm. Therefore, the ethanol detector based on TENG not only provides a different approach for the gas detection but also further demonstrates the application potential of TENG for various sensory devices.

| S-EPMC7945684 | biostudies-literature

Self-powered H2 production with bifunctional hydrazine as sole consumable.

Project description:Splitting hydrazine into H2 and N2 by electro-catalyzing hydrogen evolution and hydrazine oxidation reactions is promising for replacing fossil energy with H2. However, current hydrazine splitting is achieved using external powers to drive the two reactions, which is inapplicable to outdoor use. Here, Fe-doped CoS2 nanosheets are developed as a bifunctional electrocatalyst for the two reactions, by which direct hydrazine fuel cells and overall-hydrazine-splitting units are realized and integrated to form a self-powered H2 production system. Without external powers, this system employs hydrazine bifunctionally as the fuel of direct hydrazine fuel cell and the splitting target, namely a sole consumable, and exhibits an H2 evolution rate of 9.95?mmol?h-1, a 98% Faradaic efficiency and a 20-h stability, all comparable to the best reported for self-powered water splitting. These performances are due to that Fe doping decreases the free-energy changes of H adsorption and adsorbed NH2NH2 dehydrogenation on CoS2.

| S-EPMC6195518 | biostudies-other

Self-Powered Diaper Sensor with Wireless Transmitter Powered by Paper-Based Biofuel Cell with Urine Glucose as Fuel.

Project description:A self-driven sensor that can detect urine and urine sugar and can be mounted on diapers is desirable to reduce the burden of long-term care. In this study, we created a paper-based glucose biofuel cell that can be mounted on diapers to detect urine sugar. Electrodes for biofuel cells were produced by printing MgO-templated porous carbon on which poly(glycidyl methacrylate) was modified using graft polymerization. A new bioanode was prepared through covalently modifying flavin-adenine-dinucleotide-dependent glucose dehydrogenase and azure A with pendant glycidyl groups of poly(glycidyl methacrylate). We prepared a cathode with covalently bonded bilirubin oxidase. Covalent bonding of enzymes and mediators to both the bioanode and biocathode suppressed elution and improved stability. The biofuel cell could achieve a maximum output density of 0.12 mW cm-2, and by combining it with a wireless transmission device, the concentration of glucose sensed from the transmission frequency was in the range of 0-10 mM. The sensitivity of the sensor was estimated at 0.0030 ± 0.0002 Hz mmol-1 dm3. This device is expected to be a new urine-sugar detection device, composed only of organic materials with a low environmental load and it can be useful for detecting postprandial hyperglycemia.

| S-EPMC8477385 | biostudies-literature

A High Sensitivity Self-Powered Wind Speed Sensor Based on Triboelectric Nanogenerators (TENGs).

Project description:Triboelectric nanogenerators (TENGs) have excellent properties in harvesting tiny environmental energy and self-powered sensor systems with extensive application prospects. Here, we report a high sensitivity self-powered wind speed sensor based on triboelectric nanogenerators (TENGs). The sensor consists of the upper and lower two identical TENGs. The output electrical signal of each TENG can be used to detect wind speed so that we can make sure that the measurement is correct by two TENGs. We study the influence of different geometrical parameters on its sensitivity and then select a set of parameters with a relatively good output electrical signal. The sensitivity of the wind speed sensor with this set of parameters is 1.79 μA/(m/s) under a wind speed range from 15 m/s to 25 m/s. The sensor can light 50 LEDs at the wind speed of 15 m/s. This work not only advances the development of self-powered wind sensor systems but also promotes the application of wind speed sensing.

| S-EPMC8122800 | biostudies-literature

Self-Powered Intelligent Water Droplet Monitoring Sensor Based on Solid-Liquid Triboelectric Nanogenerator.

Project description:Real-time monitoring of rainwater is a critical issue in the development of autonomous vehicles and smart homes, while the corresponding sensors play a pivotal role in ensuring their sensitivity. Here, we study a self-powered intelligent water droplet monitoring sensor based on a solid-liquid triboelectric nanogenerator (SL-TENG). The sensor comprises a SL-TENG, a signal acquisition module, a central processing unit (CPU), and a wireless transmission module, facilitating the real-time monitoring of water droplet signals. It is worth noting that the SL-TENG has self-powering characteristics and can convert the kinetic energy of water droplets into electrical energy. The excellent output performance, with open-circuit voltage of 9 V and short-circuit current of 2 μA without any treatment of the SL-TENG, can provide an effective solution to the problem that traditional sensor need battery replacement. In addition, the SL-TENG can generate stable amplitude electrical signals through water droplets, exemplified by the absence of decay in a short-circuit current within 7 days. More importantly, the sensor is equipped with intelligent analytical capabilities, allowing it to assess rainfall based on variables such as amplitude and frequency. Due to its excellent stability and intelligent analysis, this sensor can be used for roof rainwater monitoring, intravenous administration monitoring, and especially in automobile automatic wipers and other fields.

| S-EPMC10974355 | biostudies-literature

A self-powered analog sensor-data-logging device based on Fowler-Nordheim dynamical systems.

Project description:Continuous, battery-free operation of sensor nodes requires ultra-low-power sensing and data-logging techniques. Here we report that by directly coupling a sensor/transducer signal into globally asymptotically stable monotonic dynamical systems based on Fowler-Nordheim quantum tunneling, one can achieve self-powered sensing at an energy budget that is currently unachievable using conventional energy harvesting methods. The proposed device uses a differential architecture to compensate for environmental variations and the device can retain sensed information for durations ranging from hours to days. With a theoretical operating energy budget less than 10 attojoules, we demonstrate that when integrated with a miniature piezoelectric transducer the proposed sensor-data-logger can measure cumulative "action" due to ambient mechanical acceleration without any additional external power.

| S-EPMC7595237 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data