Magnitude and nucleation time of the 2017 Pohang Earthquake point to its predictable artificial triggering
Ontology highlight
ABSTRACT:
SUBMITTER: Shapiro S
PROVIDER: S-EPMC8568929 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:More and more earthquake early warning systems (EEWS) are developed or currently being tested in many active seismic regions of the world. A well-known problem with real-time procedures is the parameter saturation, which may lead to magnitude underestimation for large earthquakes. In this paper, the method used to the MW9.0 Tohoku-Oki earthquake is explored with strong-motion records of the MW7.9, 2008 Wenchuan earthquake. We measure two early warning parameters by progressively expanding the P-wave time window (PTW) and distance range, to provide early magnitude estimates and a rapid prediction of the potential damage area. This information would have been available 40 s after the earthquake origin time and could have been refined in the successive 20 s using data from more distant stations. We show the suitability of the existing regression relationships between early warning parameters and magnitude, provided that an appropriate PTW is used for parameter estimation. The reason for the magnitude underestimation is in part a combined effect of high-pass filtering and frequency dependence of the main radiating source during the rupture process. Finally we suggest only using Pd alone for magnitude estimation because of its slight magnitude saturation compared to the τc magnitude.
| S-EPMC4209451 | biostudies-other
Project description:The transition from quasistatic slip growth to dynamic rupture propagation constitutes one possible scenario to describe earthquake nucleation. If this transition is rather well understood for homogeneous faults, how the friction properties of multiscale asperities may influence the overall stability of seismogenic faults remains largely unclear. Combining classical nucleation theory and concepts borrowed from condensed matter physics, we propose a comprehensive analytical framework that predicts the influence of heterogeneities of weakening rate on the nucleation length Lc for linearly slip-dependent friction laws. Model predictions are compared to nucleation lengths measured from 2D dynamic simulations of earthquake nucleation along heterogeneous faults. Our results show that the interplay between frictional properties and the asperity size gives birth to three instability regimes (local, extremal, and homogenized), each related to different nucleation scenarios, and that the influence of heterogeneities at a scale far lower than the nucleation length can be averaged.
| S-EPMC9286591 | biostudies-literature
Project description:The majority of earthquakes occur unexpectedly and can trigger subsequent sequences of events that can culminate in more powerful earthquakes. This self-exciting nature of seismicity generates complex clustering of earthquakes in space and time. Therefore, the problem of constraining the magnitude of the largest expected earthquake during a future time interval is of critical importance in mitigating earthquake hazard. We address this problem by developing a methodology to compute the probabilities for such extreme earthquakes to be above certain magnitudes. We combine the Bayesian methods with the extreme value theory and assume that the occurrence of earthquakes can be described by the Epidemic Type Aftershock Sequence process. We analyze in detail the application of this methodology to the 2016 Kumamoto, Japan, earthquake sequence. We are able to estimate retrospectively the probabilities of having large subsequent earthquakes during several stages of the evolution of this sequence.
| S-EPMC6731311 | biostudies-literature
Project description:The earthquake nucleation process has been vigorously investigated based on geophysical observations, laboratory experiments, and theoretical studies; however, a general consensus has yet to be achieved. Here, we studied nucleation process for the 2014 Iquique, Chile Mw 8.2 megathrust earthquake located within the current North Chile seismic gap, by analyzing a long-term earthquake catalog constructed from a cross-correlation detector using continuous seismic data. Accelerations in seismicity, the amount of aseismic slip inferred from repeating earthquakes, and the background seismicity, accompanied by an increasing frequency of earthquake migrations, started around 270 days before the mainshock at locations up-dip of the largest coseismic slip patch. These signals indicate that repetitive sequences of fast and slow slip took place on the plate interface at a transition zone between fully locked and creeping portions. We interpret that these different sliding modes interacted with each other and promoted accelerated unlocking of the plate interface during the nucleation phase.
| S-EPMC4842989 | biostudies-literature
Project description:Deep intracontinental earthquakes are poorly understood, despite their potential to cause significant destruction. Although lower crustal strength is currently a topic of debate, dry lower continental crust may be strong under high-grade conditions. Such strength could enable earthquake slip at high differential stress within a predominantly viscous regime, but requires further documentation in nature. Here, we analyse geological observations of seismic structures in exhumed lower crustal rocks. A granulite facies shear zone network dissects an anorthosite intrusion in Lofoten, northern Norway, and separates relatively undeformed, microcracked blocks of anorthosite. In these blocks, pristine pseudotachylytes decorate fault sets that link adjacent or intersecting shear zones. These fossil seismogenic faults are rarely >15 m in length, yet record single-event displacements of tens of centimetres, a slip/length ratio that implies >1 GPa stress drops. These pseudotachylytes represent direct identification of earthquake nucleation as a transient consequence of ongoing, localised aseismic creep.
| S-EPMC7067852 | biostudies-literature
Project description:It has been shown that large magnitude earthquakes can remotely trigger other large magnitude earthquakes within three days. Such triggering of high magnitude earthquakes is potentially indicative of fault systems at the end of their seismic cycles. Here a method is developed to examine local earthquake history to determine how susceptible a given area is to remote triggering of high magnitude earthquakes. The method is applied to all plate boundaries. Only 14% of global tectonic boundaries are not susceptible to remote triggering, while 86% show susceptibility to varying degrees. The most highly susceptible locations begin triggering at lower magnitudes, dependent on the type of plate boundary. Varying patterns in susceptibility to remote triggering are observed around individual plates. Finite element modeling of the Cocos Plate reveals normal modes which appear consistent with its spatial patterns of high susceptibility. Many of the natural frequencies of the Cocos Plate are closely associated with the frequencies of free oscillations of the earth and could be induced by large earthquakes. Analysis of the stress tensors generated by the normal modes supports a delayed triggering mechanism involving one-sided negative (compressive) stress normal to the plane of the fault.
| S-EPMC8782900 | biostudies-literature
Project description:Predictable and tunable etching of angstrom-scale nanopores in single-layer graphene (SLG) can allow one to realize high-performance gas separation even from similar-sized molecules. We advance toward this goal by developing two etching regimes for SLG where the incorporation of angstrom-scale vacancy defects can be controlled. We screen several exposure profiles for the etchant, controlled by a multipulse millisecond treatment, using a mathematical model predicting the nucleation and pore expansion rates. The screened profiles yield a narrow pore-size-distribution (PSD) with a majority of defects smaller than missing 16 carbon atoms, suitable for CO2/N2 separation, attributing to the reduced pore expansion rate at a high pore density. Resulting nanoporous SLG (N-SLG) membranes yield attractive CO2 permeance of 4400 ± 2070 GPU and CO2/N2 selectivity of 33.4 ± 7.9. In the second etching regime, by limiting the supply of the etchant, the nanopores are allowed to expand while suppressing the nucleation events. Extremely attractive carbon capture performance marked with CO2 permeance of 8730 GPU, and CO2/N2 selectivity of 33.4 is obtained when CO2-selective polymeric chains are functionalized on the expanded nanopores. We show that the etching strategy is uniform and scalable by successfully fabricating high-performance centimeter-scale membrane.
| S-EPMC8388115 | biostudies-literature
Project description:The short-term forecast of earthquakes associated with fault rupture is a challenge in seismology and rock mechanics. The evolution of mechanical characteristics of a local fault segment may be encoded in the ambient noise, thus, converting the ambient noise to an efficient source of information about the fault stress-strain conditions. In laboratory experiments we investigate micro-vibrations of a block-fault system induced by weak external disturbances with the purpose of getting reliable evidence of how the system transits to the metastable state. We show that precursory changes of spectral characteristics of micro-vibrations are observed for the complete spectrum of failure modes. In the course of experiments we systematically change the properties of interface to perform the transition from stick-slip to steady sliding and observe the characteristics of micro-vibrations of the laboratory block-fault system. Detected were systematical alterations of the system natural frequency and those alterations were determined by the evolution of fault stiffness. The detected regularities suggest that the final stage of seismic event preparation can be revealed in analyzing the spectral characteristics of ambient noise. The detection of natural oscillations of a block-fault system can be a new useful tool to monitor active faults in real time.
| S-EPMC6050260 | biostudies-literature
Project description:Recent Global Positioning System observations of major earthquakes such as the 2014 Chile megathrust show a slow preslip phase releasing a significant portion of the total moment (Ruiz et al., 2014, https://doi.org/10.1126/science.1256074). Despite advances from theoretical stability analysis (Rubin & Ampuero, 2005, https://doi.org/10.1029/2005JB003686; Ruina, 1983, https://doi.org/10.1029/jb088ib12p10359) and modeling (Kaneko et al., 2017, https://doi.org/10.1002/2016GL071569), it is not fully understood what controls the prevalence and the amount of slip in the nucleation process. Here we present laboratory observations of slow slip preceding dynamic rupture, where we observe a dependence of nucleation size and position on the loading rate (laboratory equivalent of tectonic loading rate). The setup is composed of two polycarbonate plates under direct shear with a 30-cm long slip interface. The results of our laboratory experiments are in agreement with the preslip model outlined by Ellsworth and Beroza (1995, https://doi.org/10.1126/science.268.5212.851) and observed in laboratory experiments (Latour et al., 2013, https://doi.org/10.1002/grl.50974; Nielsen et al., 2010, https://doi.org/10.1111/j.1365-246x.2009.04444.x; Ohnaka & Kuwahara, 1990, https://doi.org/10.1016/0040-1951(90)90138-X), which show a slow slip followed by an acceleration up to dynamic rupture velocity. However, further complexity arises from the effect of (1) rate of shear loading and (2) inhomogeneities on the fault surface. In particular, we show that when the loading rate is increased from 10-2 to 6 MPa/s, the nucleation length can shrink by a factor of 3, and the rupture nucleates consistently on higher shear stress areas. The nucleation lengths measured fall within the range of the theoretical limits L b and L? derived by Rubin and Ampuero (2005, https://doi.org/10.1029/2005JB003686) for rate-and-state friction laws.
| S-EPMC6472498 | biostudies-literature
Project description:Dynamics of granular media is the key to understanding behavior of many natural systems. In this work we concentrate on studying regularities of deformation of a gouge-filled fault. Confined granular layer - model fault - subjected to an external stress may display sudden slip owing to rearrangement of the granular layer. In nature fast slip along a fault results in an earthquake. To understand fault behavior better, we have conducted a comprehensive analysis of acoustic emission (AE) data that accompany stick-slip in granular media. Here we reveal and trace the emergence of two populations of AE. The first one is characterized by a waveform with a harsh onset, while the second one exhibits a gradual amplitude rise and a tremor-like waveform. During a regular stick-slip the statistical properties of the first population remains intact. The second one is very sensitive to alterations of stress conditions, and its scaling parameters correlate with the change of mechanical characteristics of the fault. Probably, AE populations were identified corresponding to two gouge-filled fault subsystems - a load-bearing granular network and an ensemble of relatively unloaded grains in the granular layer. The detected regularities point to a compound self-organization processes in fault zones and suggest that the final stage of earthquake preparation can be revealed in analyzing the scaling characteristics of seismic-acoustic data.
| S-EPMC7190713 | biostudies-literature