Dataset Information

A Retrospective Analysis of Chemical Constituents in Regulated and Unregulated E-Cigarette Liquids

ABSTRACT: E-cigarette or vaping use-associated lung injury (EVALI) was identified with the incidents of a multi-state outbreak of acute lung injuries associated with the use of electronic cigarettes (e-cigs) and attributed to vitamin E acetate in off-market cannabis-based e-liquids. Aside from EVALI, hypersecretion of mucus, irritated nasal passages, and watery, red eyes have been defined as complaints associated with vaping standard nicotine-based e-liquids. The chemical composition of e-liquids varies between manufacturers and robust oversight of ingredients is lacking. Manufacturers use chemicals deemed “generally recognized as safe” (GRAS) by the FDA, a designation for chemicals used in foodstuffs to be ingested. Most “GRAS” chemicals are associated with at least one Global Harmonization System (GHS) warning class, ranging from irritant to toxic. Untargeted chemical analysis is critical to evaluate e-liquid products to determine chemical composition; equally important is the quantitation of components to help elucidate the potential harms from exceeding recommended exposure limits. Untargeted screening of e-liquids was accomplished using gas chromatography-mass spectrometry (GC-MS) and Direct Analysis in Real Time-AccuTOF™ mass spectrometry (DART-ToF-MS) and has identified 350 chemical constituents from 241 products analyzed. Nicotine, caffeine, menthol, and vitamin E were confirmed and quantitated by GC-MS, ethanol was confirmed and quantitated by headspace-gas chromatography-dual flame ionization detection (HS-GC-FID), and olivetol and cannabinoids were confirmed and quantitated by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Maximum identified concentrations of nicotine, caffeine, menthol, vitamin E, ethanol, olivetol, Δ9-tetrahydrocannabinol, and cannabidiol were 56.4, 26.9, 4.28, 307.9, 217.2, 399.6, 497.7, and 332.6 mg/ml, respectively. Evaluation of untargeted analysis and quantitation of unlabeled chemical components of e-liquids is essential to improving etiology of acute lung injury and less severe impacts of vaping, both short-term and long-term. The historical documentation of unlabeled ingredients can provide some insight for a retrospective analysis of health consequences and inform policy discussions.

SUBMITTER: Holt A

PROVIDER: S-EPMC8581558 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:OBJECTIVE:To provide a hazard prioritisation for reported chemical constituents of cigarette smoke using toxicological risk assessment principles and assumptions. The purpose is to inform prevention efforts using harm reduction. DATA SOURCES:International Agency for Research on Cancer Monographs; California and US Environmental Protection Agency cancer potency factors (CPFs) and reference exposure levels; scientific journals and government reports from the USA, Canada, and New Zealand. STUDY SELECTION:This was an inclusive review of studies reporting yields of cigarette smoke constituents using standard ISO methods. DATA EXTRACTION:Where possible, the midpoint of reported ranges of yields was used. DATA SYNTHESIS:Data on 158 compounds in cigarette smoke were found. Of these, 45 were known or suspected human carcinogens. Cancer potency factors were available for 40 of these compounds and reference exposure levels (RELs) for non-cancer effects were found for 17. A cancer risk index (CRI) was calculated by multiplying yield levels with CPFs. A non-cancer risk index (NCRI) was calculated by dividing yield levels with RELs. Gas phase constituents dominate both CRI and NCRI for cigarette smoke. The contribution of 1,3-butadiene (BDE) to CRI was more than twice that of the next highest contributing carcinogen (acrylonitrile) using potencies from the State of California EPA. Using those potencies from the USEPA, BDE ranked third behind arsenic and acetaldehyde. A comparison of CRI estimates with estimates of smoking related cancer deaths in the USA showed that the CRI underestimates the observed cancer rates by about fivefold using ISO yields in the exposure estimate. CONCLUSIONS:The application of toxicological risk assessment methods to cigarette smoke provides a plausible and objective framework for the prioritisation of carcinogens and other toxicant hazards in cigarette smoke. However, this framework does not enable the prediction of actual cancer risk for a number of reasons that are discussed. Further, the lack of toxicology data on cardiovascular end points for specific chemicals makes the use of this framework less useful for cardiovascular toxicity. The bases for these priorities need to be constantly re-evaluated as new toxicology information emerges.

Project description:Ambient desorption/ionization mass spectrometry (ADI-MS) has been widely used for direct analysis of real samples without sample preparation or separation. Studies on the quantification of low molecular weight compounds in complex matrices with ADI-MS remain scarce. In this paper, we report the application of surface-assisted flowing atmospheric-pressure afterglow mass spectrometry (SA-FAPA-MS) for fast qualitative screening of electronic cigarette liquid (e-liquids) ingredients and direct quantification of nicotine. The quantification approach is rapid, uses a deuterated D4-nicotine standard spike, and does not require a preceding chromatography step or other methods to remove the complex sample matrix. Selected e-liquids were directly applied on thin-layer chromatography (TLC) plate surfaces (normal phase (NP) silica, reversed phase (RP) modified silica, cyano (CN) modified silica, and dimethyl (RP2) modified silica) after dilution and internal standard spiking. The plates served purely as sample carriers and no analyte separation was performed. Promising qualitative results were obtained, demonstrating the ability to detect nicotine alkaloids using this approach and the ability to differentiate e-liquids based on their flavor variations. In addition, dimethyl- (RP2-) and cyano-modified (CN-) silica surfaces were selected for quantification based on performance results of previous studies. It was shown that results were in high accordance with high-performance liquid chromatography (HPLC) experiments with lowest deviations <3% on dimethyl surfaces. Additional quantitative experiments including a certified reference material achieved equally satisfying results with lowest deviations of -1.1% from the certified nicotine content. For nicotine, detection limits down to the fmol range (96 fmol on CN and 20 fmol on RP2) were obtained. A detailed comparison of glass surfaces with functionalized surfaces showed that the functionalized surfaces were superior in terms of sample application reproducibility, mass spectra quality, sensitivity, and information density. Thus, functionalized thin-layer surfaces are considered promising tools for both qualitative and quantitative ADI-MS analysis of complex samples.

Project description:IntroductionSugars are major constituents and additives in traditional tobacco products, but little is known about their content or related toxins (formaldehyde, acetaldehyde, and acrolein) in electronic cigarette (e-cigarette) liquids. This study quantified levels of sugars and aldehydes in e-cigarette liquids across brands, flavors, and nicotine concentrations (n = 66).MethodsUnheated e-cigarette liquids were analyzed using liquid chromatography mass spectrometry and enzymatic test kits. Generalized linear models, Fisher's exact test, and Pearson's correlation coefficient assessed sugar, aldehyde, and nicotine concentration associations.ResultsGlucose, fructose and sucrose levels exceeded the limits of quantification in 22%, 53% and 53% of the samples. Sucrose levels were significantly higher than glucose [χ2(1) = 85.9, p < .0001] and fructose [χ2(1) = 10.6, p = .001] levels. Formaldehyde, acetaldehyde, and acrolein levels exceeded the limits of quantification in 72%, 84%, and 75% of the samples. Acetaldehyde levels were significantly higher than formaldehyde [χ2(1) = 11.7, p = .0006] and acrolein [χ2(1) = 119.5, p < .0001] levels. Differences between nicotine-based and zero-nicotine labeled e-cigarette liquids were not statistically significant for sugars or aldehydes. We found significant correlations between formaldehyde and fructose (-0.22, p = .004) and sucrose (-0.25, p = .002) and acrolein and fructose (-0.26, p = .0006) and sucrose (-0.21, p = .0006). There were no significant correlations between acetaldehyde and any of the sugars or any of the aldehydes and glucose.ConclusionsSugars and related aldehydes were identified in unheated e-cigarette liquids and their composition may influence experimentation in naïve users and their potential toxicity.ImplicationsThe data can inform the regulation of specific flavor constituents in tobacco products as a strategy to protect young people from using e-cigarettes, while balancing FDA's interest in how these emerging products could potentially benefit adult smokers who are seeking to safely quit cigarette smoking. The data can also be used to educate consumers about ingredients in products that may contain nicotine and inform future FDA regulatory policies related to product standards and accurate and comprehensible labeling of e-cigarette liquids.

Project description:IntroductionFlavor aldehydes in e-cigarettes, including vanillin, ethyl vanillin (vanilla), and benzaldehyde (berry/fruit), rapidly undergo chemical reactions with the e-liquid solvents, propylene glycol, and vegetable glycerol (PG/VG), to form chemical adducts named flavor aldehyde PG/VG acetals that can efficiently transfer to e-cigarette aerosol. The objective of this study was to compare the cytotoxic and metabolic toxic effects of acetals and their parent aldehydes in respiratory epithelial cells.Aims and methodsCell metabolic assays were carried out in bronchial (BEAS-2B) and alveolar (A549) epithelial cells assessing the effects of benzaldehyde, vanillin, ethyl vanillin, and their corresponding PG acetals on key bioenergetic parameters of mitochondrial function. The potential cytotoxic effects of benzaldehyde and vanillin and their corresponding PG acetals were analyzed using the LIVE/DEAD cell assay in BEAS-2B cells and primary human nasal epithelial cells (HNEpC). Cytostatic effects of vanillin and vanillin PG acetal were compared using Click-iT EDU cell proliferation assay in BEAS-2B cells.ResultsCompared with their parent aldehydes, PG acetals diminished key parameters of cellular energy metabolic functions, including basal respiration, adenosine triphosphate production, and spare respiratory capacity. Benzaldehyde PG acetal (1-10 mM) increased cell mortality in BEAS-2B and HNEpC, compared with benzaldehyde. Vanillin PG acetal was more cytotoxic than vanillin at the highest concentration tested while both diminished cellular proliferation in a concentration-dependent manner.ConclusionsReaction products formed in e-liquids between flavor aldehydes and solvent chemicals have differential toxicological properties from their parent flavor aldehydes and may contribute to the health effects of e-cigarette aerosol in the respiratory system of e-cigarette users.ImplicationsWith no inhalation toxicity studies available for acetals, data from this study will provide a basis for further toxicological studies using in vitro and in vivo models. This study suggests that manufacturers' disclosure of e-liquid ingredients at time of production may be insufficient to inform a comprehensive risk assessment of e-liquids and electronic nicotine delivery systems use, due to the chemical instability of e-liquids over time and the formation of new compounds.

Dataset Information

A Retrospective Analysis of Chemical Constituents in Regulated and Unregulated E-Cigarette Liquids

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets