Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Facile and Quantitative Method for Estimating the Isolation Degree of Cellulose Nanocrystals (CNCs) Suspensions.

ABSTRACT: The isolation degree of cellulose nanocrystals (CNCs) suspensions calculated from the amount of sediments obtained with the centrifugation method can be estimated with turbidimetry, surface charge and dispersion analysis of the CNCs suspension. Three different types of raw cellulosic materials were used and carried out with an acid hydrolysis and mechanical disintegration. As the number of high-pressure homogenizer treatments increased, the isolation degree of CNCs from microcrystalline cellulose (MCC) increased from 2.3 to 99.6%, while the absorbencies from turbidimetric measurement of the CNCs suspension decreased, from 2.6 to 0.1 Abs units. Furthermore, the surface charges based on zeta potential measurements of the CNCs suspensions increased from -34.6 to -98.7 mV, but the heights of sediments from the CNCs suspensions were reduced, from 4.01 to 0.07 mm. Similar results were obtained for CNCs from softwood pulp (SWP) and cotton pulp (CP). These results show a direct correlation between yield, turbidity, surface charge and sedimentation of CNCs suspensions. Their correlation indices (0.9) were close to a maximal value of 1. This approach can be suggested as a facile and rapid estimation method for CNCs manufacturing process.

SUBMITTER: Lee M

PROVIDER: S-EPMC8585153 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Cellulose Nanocrystals (CNCs) from Corn Stalk: Activation Energy Analysis.

Project description:Cellulose nanocrystals (CNCs) were isolated from corn stalk using sulfuric acid hydrolysis, and their morphology, chemical structure, and thermal stability properties were characterized. The CNCs had an average length of 120.2 ± 61.3 nm and diameter of 6.4 ± 3.1 nm (L/D = 18.7). The degree of crystallinity of the CNCs increased to 69.20% from the 33.20% crystallinity of raw corn stalk fiber, while the chemical structure was well kept after sulfuric acid hydrolysis. Thermal stability analysis showed that the degradation temperature of the CNCs reached 239.5 °C, which was higher than that of the raw fiber but lower than that of the extracted cellulose. The average activation energy values for the CNCs, evaluated using the Friedman, Flynn-Wall-Ozawa (F-W-O) and Coats-Redfern methods, were 312.6, 302.8, and 309 kJ·mol-1 in the conversion range of 0.1 to 0.8. The isolated CNCs had higher values of activation energy than did the purified cellulose, which was attributed to the stronger hydrogen bonds present in the crystalline domains of CNCs than in those of cellulose. These findings can help better understand the thermal properties of polymer/CNC composites.

| S-EPMC5344553 | biostudies-other

Efficient Isolation Method for Highly Charged Phosphorylated Cellulose Nanocrystals.

Project description:Phosphorylation of cellulose nanocrystals (CNCs) has remained a marginal activity despite the undisputed application potential in flame-retardant materials, sustainable high-capacity ion-exchange materials, or substrates for biomineralization among others. This is largely due to strenuous extraction methods prone to a combination of poor reproducibility, low degrees of substitution, disappointing yields, and impractical reaction sequences. Here, we demonstrate an improved methodology relying on the modification routines for phosphorylated cellulose nanofibers and hydrolysis by gaseous HCl to isolate CNCs. This allows us to overcome the aforementioned shortcomings and to reliably and reproducibly extract phosphorylated CNCs with exceptionally high surface charge (∼2000 mmol/kg) in a straightforward routine that minimizes water consumption and maximizes yields. The CNCs were characterized by NMR, ζpotential, conductometric titration, thermogravimetry, elemental analysis, wide-angle X-ray scattering, transmission electron microscopy, and atomic force microscopy.

| S-EPMC10015457 | biostudies-literature

Screen-Printed Glucose Sensors Modified with Cellulose Nanocrystals (CNCs) for Cell Culture Monitoring.

Project description:Glucose sensors are potentially useful tools for monitoring the glucose concentration in cell culture medium. Here, we present a new, low-cost, and reproducible sensor based on a cellulose-based material, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) oxidized-cellulose nanocrystals (CNCs). This novel biocompatible and inert nanomaterial is employed as a polymeric matrix to immobilize and stabilize glucose oxidase in the fabrication of a reproducible, operationally stable, highly selective, cost-effective, screen-printed glucose sensor. The sensors have a linear range of 0.1-2 mM (R2 = 0.999) and a sensitivity of 5.7 ± 0.3 µA cm-2∙mM-1. The limit of detection is 0.004 mM, and the limit of quantification is 0.015 mM. The sensor maintains 92.3 % of the initial current response after 30 consecutive measurements in a 1 mM standard glucose solution, and has a shelf life of 1 month while maintaining high selectivity. We demonstrate the practical application of the sensor by monitoring the glucose consumption of a fibroblast cell culture over the course of several days.

| S-EPMC7557574 | biostudies-literature

Electrohydrodynamic convection instabilities observed in suspensions of cellulose nanocrystals.

Project description:Cellulose nanocrystals are slender, negatively charged nanoparticles that spontaneously form a cholesteric liquid crystal in aqueous suspension above a critical concentration. When they are suspended in apolar solvents such as toluene using surfactants, the application of an AC electric field leads to the reorientation and then distortion of the cholesteric order until the cholesteric structure completely unwinds into a nematic-like order, typically above 0.4-0.6 kV/cm at 1kHz. In this work, we show that at much higher electric fields (≥ 4.6 kV/cm at 1 kHz) the sample develops a periodic pattern that varies with the field amplitude. We ascribed this pattern to electrohydrodynamic convection instabilities. These instabilities usually present complex regimes varying with the field, the voltage, the frequency and the geometry. However, the typical geometry where these instabilities were most documented across the literature differs from the geometry used in this work. This work concludes with possible future experimental investigations to clarify the exact regime of instability responsible for these observations.Supplementary informationThe online version contains supplementary material available at 10.1007/s10570-023-05391-6.

| S-EPMC10473993 | biostudies-literature

Structure Selectivity of Alkaline Periodate Oxidation on Lignocellulose for Facile Isolation of Cellulose Nanocrystals.

Project description:Reported here for the first time is the alkaline periodate oxidation of lignocelluloses for the selective isolation of cellulose nanocrystals (CNCs). With the high concentrations as a potassium salt at pH?10, periodate ions predominantly exist as dimeric orthoperiodate ions (H2 I2 O10 4- ). With reduced oxidizing activity in alkaline solutions, dimeric orthoperiodate ions preferentially oxidized non-ordered cellulose regions. The alkaline surroundings promoted the degradation of these oxidized cellulose chains by ?-alkoxy fragmentation and generated CNCs. The obtained CNCs were uniform in size and generally contained carboxy groups. Furthermore, the reaction solution could be reused after regeneration of the periodate with ozone gas. This method allows direct production of CNCs from diverse sources, in particular lignocellulosic raw materials including sawdust (European beech and Scots pine), flax, and kenaf, in addition to microcrystalline cellulose and pulp.

| S-EPMC7027850 | biostudies-literature

Effect of the Interactions between Oppositely Charged Cellulose Nanocrystals (CNCs) and Chitin Nanocrystals (ChNCs) on the Enhanced Stability of Soybean Oil-in-Water Emulsions.

Project description:Chitin nanocrystals (ChNCs) and cellulose nanocrystals (CNCs) have been recently used to stabilize emulsions; however, they generally require significant amounts of salt, limiting their applicability in food products. In this study, we developed nanoconjugates by mixing positively charged ChNCs and negatively charged CNCs at various ChNC:CNC mass ratios (2:1, 1:1, and 1:2), and utilized them in stabilizing soybean oil-water Pickering emulsions with minimal use of NaCl salt (20 mM) and nanoparticle (NP) concentrations below 1 wt%. The nanoconjugates stabilized the emulsions better than individual CNC or ChNC in terms of a reduced drop growth and less creaming. Oppositely charged CNC and ChNC neutralized each other when their mass ratio was 1:1, leading to significant flocculation in the absence of salt at pH 6. Raman spectroscopy provided evidence for electrostatic interactions between the ChNCs and CNCs, and generated maps suggesting an assembly of ChNC bundles of micron-scale lengths intercalated by similar-size areas predominantly composed of CNC. The previous measurements, in combination with contact angles on nanoparticle films, suggested that the conjugates preferentially exposed the hydrophobic crystalline planes of CNCs and ChNCs at a 1:1 mass ratio, which was also the best ratio at stabilizing soybean oil-water Pickering emulsions.

| S-EPMC9573157 | biostudies-literature

Twist-Bend Stage in the Relaxation of Sheared Chiral Nematic Suspensions of Cellulose Nanocrystals.

Project description:Aqueous suspensions of cellulose nanocrystals (CNCs), prepared from natural cellulose by sulfuric acid hydrolysis, form stable chiral nematic suspensions above a critical CNC concentration. The chiral nematic organization may be preserved in films prepared from the suspensions by evaporation. However, shrinkage, gelation, and shear during film formation impair the optical properties of the dry film. In this article, we report an unusual behavior for a sample in which gelation occurred before the sample reached iridescent pitch values. In attempting to decouple changes in texture due to evaporation from those due to shear relaxation effects for this sample, we observed a transitory nematic-like texture that was induced by shear during the preparation of the sample for polarized light microscopy. We propose that the transition between chiral nematic and nematic structures involves a twist-bend-like intermediate and not an untwisting of the chiral nematic phase.

| S-EPMC6641273 | biostudies-literature

Towards the scalable isolation of cellulose nanocrystals from tunicates.

Project description:In order for sustainable nanomaterials such as cellulose nanocrystals (CNCs) to be utilized in industrial applications, a large-scale production capacity for CNCs must exist. Currently the only CNCs available commercially in kilogram scale are obtained from wood pulp (W-CNCs). Scaling the production capacity of W-CNCs isolation has led to their use in broader applications and captured the interest of researchers, industries and governments alike. Another source of CNCs with potential for commercial scale production are tunicates, a species of marine animal. Tunicate derived CNCs (T-CNCs) are a high aspect ratio CNC, which can complement commercially available W-CNCs in the growing global CNC market. Herein we report the isolation and characterization of T-CNCs from the tunicate Styela clava, an invasive species currently causing significant harm to local aquaculture communities. The reported procedure utilizes scalable CNC processing techniques and is based on our experiences from laboratory scale T-CNC isolation and pilot scale W-CNC isolation. To our best knowledge, this study represents the largest scale where T-CNCs have been isolated from any tunicate species, under any reaction conditions. Demonstrating a significant step towards commercial scale isolation of T-CNCs, and offering a potential solution to the numerous challenges which invasive tunicates pose to global aquaculture communities.

| S-EPMC7645590 | biostudies-literature

Isolation and Characterization of Cellulose Nanocrystals from Date Palm Waste

Project description:This study presents

| S-EPMC9330260 | biostudies-literature

Quantitative Determination of Metal Ion Adsorption on Cellulose Nanocrystals Surfaces.

Project description:Nanocellulose is a bio-based material that holds significant potential in the field of water purification. Of particular interest is their potential use as a key sorbent material for the removal of metal ions from solution. However, the structure of metal ions adsorbed onto cellulose surfaces is not well understood. The focus of this work is to determine quantitatively the three-dimensional distribution of metal ions of different valencies surrounding negatively charged carboxylate functionalized cellulose nanocrystals (CNCs) using anomalous small-angle X-ray scattering (ASAXS). These distributions can affect the water and ionic permeability in these materials. The data show that increasing the carboxylate density on the surface of the CNCs from 740 to 1100 mmol/kg changed the nature of the structure of the adsorbed ions from a monolayer into a multilayer structure. The monolayer was modeled as a Stern layer around the CNC nanoparticles, whereas the multilayer structure was modeled as a diffuse layer on top of the Stern layer around the nanoparticles. Within the Stern layer, the maximum ion density increases from 1680 to 4350 mmol of Rb+/(kg of CNC) with the increase in the carboxylate density on the surface of the nanoparticles. Additionally, the data show that CNCs can leverage multiple mechanisms, such as electrostatic attraction and the chaotropic effect, to adsorb ions of different valencies. By understanding the spatial organization of the adsorbed metal ions, the design of cellulose-based sorbents can be further optimized to improve the uptake capacity and selectivity in separation applications.

| S-EPMC10811751 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data