Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Electronic and lattice strain dual tailoring for boosting Pd electrocatalysis in oxygen reduction reaction.

ABSTRACT: Deliberately optimizing the d-band position of an active component via electronic and lattice strain tuning is an effective way to boost its catalytic performance. We herein demonstrate this concept by constructing core-shell Au@NiPd nanoparticles with NiPd alloy shells of only three atomic layers through combining an Au catalysis with the galvanic replacement reaction. The Au core with larger electronegativity modulates the Pd electronic configuration, while the Ni atoms alloyed in the ultrathin shells neutralize the lattice stretching in Pd shells exerted by Au cores, equipping the active Pd metal with a favorable d-band position for electrochemical oxygen reduction reaction in an alkaline medium, for which core-shell Au@NiPd nanoparticles with a Ni/Pd atomic ratio of 3/7 exhibit a half-wave potential of 0.92 V, specific activity of 3.7 mA cm^-2, and mass activity of 0.65 A mg^-1 at 0.9 V, much better than most of the recently reported Pd-even Pt-based electrocatalysts.

SUBMITTER: Zeng Q

PROVIDER: S-EPMC8586809 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Electrocatalysis of Oxygen Reduction Reaction on Shape-Controlled Pt and Pd Nanoparticles-Importance of Surface Cleanliness and Reconstruction.

Project description:Shape-controlled precious metal nanoparticles have attracted significant research interest in the recent past due to their fundamental and scientific importance. Because of their crystallographic-orientation-dependent properties, these metal nanoparticles have tremendous implications in electrocatalysis. This review aims to discuss the strategies for synthesis of shape-controlled platinum (Pt) and palladium (Pd) nanoparticles and procedures for the surfactant removal, without compromising their surface structural integrity. In particular, the electrocatalysis of oxygen reduction reaction (ORR) on shape-controlled nanoparticles (Pt and Pd) is discussed and the results are analyzed in the context of that reported with single crystal electrodes. Accepted theories on the stability of precious metal nanoparticle surfaces under electrochemical conditions are revisited. Dissolution, reconstruction, and comprehensive views on the factors that contribute to the loss of electrochemically active surface area (ESA) of nanoparticles leading to an inevitable decrease in ORR activity are presented. The contribution of adsorbed electrolyte anions, in-situ generated adsorbates and contaminants toward the ESA reduction are also discussed. Methods for the revival of activity of surfaces contaminated with adsorbed impurities without perturbing the surface structure and its implications to electrocatalysis are reviewed.

| S-EPMC6787902 | biostudies-literature

Boosting Lattice Oxygen Oxidation of Perovskite to Efficiently Catalyze Oxygen Evolution Reaction by FeOOH Decoration.

Project description:In the process of oxygen evolution reaction (OER) on perovskite, it is of great significance to accelerate the hindered lattice oxygen oxidation process to promote the slow kinetics of water oxidation. In this paper, a facile surface modification strategy of nanometer-scale iron oxyhydroxide (FeOOH) clusters depositing on the surface of LaNiO3 (LNO) perovskite is reported, and it can obviously promote hydroxyl adsorption and weaken Ni-O bond of LNO. The above relevant evidences are well demonstrated by the experimental results and DFT calculations. The excellent hydroxyl adsorption ability of FeOOH-LaNiO3 (Fe-LNO) can obviously optimize OH- filling barriers to promote lattice oxygen-participated OER (LOER), and the weakened Ni-O bond of LNO perovskite can obviously reduce the reaction barrier of the lattice oxygen participation mechanism (LOM). Based on the above synergistic catalysis effect, the Fe-LNO catalyst exhibits a maximum factor of 5 catalytic activity increases for OER relative to the pristine perovskite and demonstrates the fast reaction kinetics (low Tafel slope of 42 mV dec-1) and superior intrinsic activity (TOFs of ~40 O2 S-1 at 1.60 V vs. RHE).

| S-EPMC7368968 | biostudies-literature

RuO<sub>2</sub> electronic structure and lattice strain dual engineering for enhanced acidic oxygen evolution reaction performance.

Project description:Developing highly active and durable electrocatalysts for acidic oxygen evolution reaction remains a great challenge due to the sluggish kinetics of the four-electron transfer reaction and severe catalyst dissolution. Here we report an electrochemical lithium intercalation method to improve both the activity and stability of RuO2 for acidic oxygen evolution reaction. The lithium intercalates into the lattice interstices of RuO2, donates electrons and distorts the local structure. Therefore, the Ru valence state is lowered with formation of stable Li-O-Ru local structure, and the Ru-O covalency is weakened, which suppresses the dissolution of Ru, resulting in greatly enhanced durability. Meanwhile, the inherent lattice strain results in the surface structural distortion of LixRuO2 and activates the dangling O atom near the Ru active site as a proton acceptor, which stabilizes the OOH* and dramatically enhances the activity. This work provides an effective strategy to develop highly efficient catalyst towards water splitting.

| S-EPMC9249734 | biostudies-literature

Surface distortion as a unifying concept and descriptor in oxygen reduction reaction electrocatalysis.

Project description:Tuning the surface structure at the atomic level is of primary importance to simultaneously meet the electrocatalytic performance and stability criteria required for the development of low-temperature proton-exchange membrane fuel cells (PEMFCs). However, transposing the knowledge acquired on extended, model surfaces to practical nanomaterials remains highly challenging. Here, we propose 'surface distortion' as a novel structural descriptor, which is able to reconciliate and unify seemingly opposing notions and contradictory experimental observations in regards to the electrocatalytic oxygen reduction reaction (ORR) reactivity. Beyond its unifying character, we show that surface distortion is pivotal to rationalize the electrocatalytic properties of state-of-the-art of PtNi/C nanocatalysts with distinct atomic composition, size, shape and degree of surface defectiveness under a simulated PEMFC cathode environment. Our study brings fundamental and practical insights into the role of surface defects in electrocatalysis and highlights strategies to design more durable ORR nanocatalysts.

| S-EPMC6109589 | biostudies-literature

Short-range amorphous carbon nanosheets for oxygen reduction electrocatalysis.

Project description:Selectively creating active sites that can work well in different media as much as possible remains an open challenge for the widespread application of sustainable metal air batteries and fuel cells. Herein, short-range amorphous nitrogen-doped carbon nanosheets (NCS) coupled with partially graphitized porous carbon architecture were reported, and were prepared via flexible salt-assisted calcination strategy and followed by a simple cleaning process. The short-range amorphous structure not only significantly promotes the exposure of electrochemically active sites of carbon defects with less protonation in acidic medium, but also maintains the structural stability and electron conduction of the NCS. This unique structure endows the NCS (0.832 V) with efficient ORR electrocatalytic performance with a high half-wave potential (E 1/2) comparable to that of commercial Pt/C (0.837 V) in alkaline electrolyte and an impressive E 1/2 of 0.64 V in harsh acidic medium, making it outstanding among the reported analogous metal-free carbon electrocatalysts. In addition, the NCS manifests robust stability for ORR electrocatalysis with little change in the catalytic activity after accelerated stability tests. This work will provide a feasible inspiration to the construction of carbon nanomaterials with high active site density for efficient energy conversion-related electrochemical reactions.

| S-EPMC9418123 | biostudies-literature

Iron phthalocyanine with coordination induced electronic localization to boost oxygen reduction reaction.

Project description:Iron phthalocyanine (FePc) is a promising non-precious catalyst for the oxygen reduction reaction (ORR). Unfortunately, FePc with plane-symmetric FeN4 site usually exhibits an unsatisfactory ORR activity due to its poor O2 adsorption and activation. Here, we report an axial Fe-O coordination induced electronic localization strategy to improve its O2 adsorption, activation and thus the ORR performance. Theoretical calculations indicate that the Fe-O coordination evokes the electronic localization among the axial direction of O-FeN4 sites to enhance O2 adsorption and activation. To realize this speculation, FePc is coordinated with an oxidized carbon. Synchrotron X-ray absorption and Mössbauer spectra validate Fe-O coordination between FePc and carbon. The obtained catalyst exhibits fast kinetics for O2 adsorption and activation with an ultralow Tafel slope of 27.5 mV dec-1 and a remarkable half-wave potential of 0.90 V. This work offers a new strategy to regulate catalytic sites for better performance.

| S-EPMC7441147 | biostudies-literature

Asymmetric Oxo-Bridged ZnPb Bimetallic Electrocatalysis Boosting CO<sub>2</sub> -to-HCOOH Reduction.

Project description:Electrochemical CO2 reduction (ECR) is one of the promising CO2 recycling technologies sustaining the natural carbon cycle and offering more sustainable higher-energy chemicals. Zn- and Pb-based catalysts have improved formate selectivity, but they suffer from relatively low current activities considering the competitive CO selectivity on Zn. Here, lead-doped zinc (Zn(Pb)) electrocatalyst is optimized to efficiently reduce CO2 to formate, while CO evolution selectivity is largely controlled. Selective formate is detected with Faradaic efficiency (FEHCOOH ) of ≈95% at an outstanding partial current density of 47 mA cm-2 in a conventional H-Cell. Zn(Pb) is further investigated in an electrolyte-fed device achieving a superior conversion rate of ≈100 mA cm-2 representing a step closer to practical electrocatalysis. The in situ analysis demonstrates that the Pb incorporation plays a crucial role in CO suppression stem from the generation of the Pb-O-C-O-Zn structure rather than the CO-boosted Pb-O-C-Zn. Density functional theory (DFT) calculations reveal that the alloying effect tunes the adsorption energetics and consequently modifies the electronic structure of the system for an optimized asymmetric oxo-bridged intermediate. The alloying effect between Zn and Pb controls CO selectivity and achieves a superior activity for a selective CO2 -to-formate reduction.

| S-EPMC8811806 | biostudies-literature

Lattice Oxygen Exchange in Rutile IrO2 during the Oxygen Evolution Reaction.

Project description:The development of efficient acidic water electrolyzers relies on understanding dynamic changes of the Ir-based catalytic surfaces during the oxygen evolution reaction (OER). Such changes include degradation, oxidation, and amorphization processes, each of which somehow affects the material's catalytic performance and durability. Some mechanisms involve the release of oxygen atoms from the oxide's lattice, the extent of which is determined by the structure of the catalyst. While the stability of hydrous Ir oxides suffers from the active participation of lattice oxygen atoms in the OER, rutile IrO2 is more stable and the lattice oxygen involvement is still under debate due to the insufficient sensitivity of commonly used online electrochemical mass spectrometry. Here, we revisit the case of rutile IrO2 at the atomic scale by a combination of isotope labeling and atom probe tomography and reveal the exchange of oxygen atoms between the oxide lattice and water. Our approach enables direct visualization of the electrochemically active volume of the catalysts and allows for the estimation of an oxygen exchange rate during the OER that is discussed in view of surface restructuring and subsequent degradation. Our work presents an unprecedented opportunity to quantitatively assess the exchange of surface species during an electrochemical reaction, relevant for the optimization of the long-term stability of catalytic systems.

| S-EPMC7341534 | biostudies-literature

Axial Oxygen Ligands Regulating Electronic and Geometric Structure of Zn-N-C Sites to Boost Oxygen Reduction Reaction.

Project description:Zn-N-C possesses the intrinsic inertia for Fenton-like reaction and can retain robust durability in harsh circumstance, but it is often neglected in oxygen reduction reaction (ORR) because of its poor catalytic activity. Zn is of fully filled 3d10 4s2 configuration and is prone to evaporation, making it difficult to regulate the electronic and geometric structure of Zn center. Here, guided by theoretical calculations, five-fold coordinated single-atom Zn sites with four in-plane N ligands is constructed and one axial O ligand (Zn-N4 -O) by ionic liquid-assisted molten salt template method. Additional axial O not only triggers a geometry transformation from the planar structure of Zn-N4 to the non-planar structure of Zn-N4 -O, but also induces the electron transfer from Zn center to neighboring atoms and lower the d-band center of Zn atom, which weakens the adsorption strength of *OH and decreases the energy barrier of rate determining step of ORR. Consequently, the Zn-N4 -O sites exhibit improved ORR activity and excellent methanol tolerance with long-term durability. The Zn-air battery assembled by Zn-N4 -O presents a maximum power density of 182 mW cm-2 and can operate continuously for over 160 h. This work provides new insights into the design of Zn-based single atom catalysts through axial coordination engineering.

| S-EPMC10460851 | biostudies-literature

Synergy between iron oxide sites and nitrogen-doped carbon xerogel/diamond matrix for boosting the oxygen reduction reaction.

Project description:The innovative design and facile synthesis of efficient and stable electrocatalysts for the oxygen reduction reaction (ORR) are crucial in the field of fuel cells. Herein, the facile synthesis of an iron oxide@nitrogen-doped carbon diamond (FeO x @NCD) composite via an effective pyrolysis strategy is reported. The properties of this electrocatalyst, including a high density of active sites, nitrogen doping, accessible surface area, well dispersed pyramidal morphology of the iron oxide, and the porous structure of the carbon matrix, promote a highly active oxygen reduction reaction (ORR) performance. The electrocatalyst exhibits outstanding stability, with a half-wave potential of 0.692 V in alkaline solution (0.1 M KOH), as well as a limiting current density of -31.5 mA cm-2 at 0.17 V vs. RHE. This study highlights the benefits of hybridizing sp2 carbon xerogel and sp3 diamond carbon allotropes with iron oxide to boost the ORR activity. The proposed strategy opens up an avenue for designing advanced carbon-supported metal oxide catalysts that exhibit excellent electrocatalytic performance.

| S-EPMC9418389 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data