Browse
Submit Data
Databases
API
Help

Dataset Information

8 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Combustion of a Solid Recovered Fuel (SRF) Produced from the Polymeric Fraction of Automotive Shredder Residue (ASR)

ABSTRACT: The use of alternative fuels derived from residues in energy-intensive industries that rely on fossil fuels can cause considerable energy cost savings, but also significant environmental benefits by conserving non-renewable resources and reducing waste disposal. However, the switching from conventional to alternative fuels is challenging for industries, which require a sound understanding of the properties and combustion characteristics of the alternative fuel, in order to adequately adapt their industrial processes and equipment for its utilization. In this work, a solid recovered fuel (SRF) obtained from the polymeric fraction of an automotive shredder residue is tested for use as an alternative fuel for scrap preheating in an aluminium refinery. The material and chemical composition of the SRF has been extensively characterized using proximate and ultimate analyses, calorific values and thermal degradation studies. Considering the calorific value and the chlorine and mercury contents measured, the SRF can be designated as class code NCV 1; Cl 2; Hg 2 (EN ISO 21640:2021). The combustion of the SRF was studied in a laboratory-scale pilot plant, where the effects of temperature, flow, and an oxidizer were determined. The ash remaining after combustion, the collected liquid, and the generated gas phase were analysed in each test. It was observed that increasing the residence time of the gas at a high temperature allowed for a better combustion of the SRF. The oxidizer type was important for increasing the total combustion of the vapour compounds generated during the oxidation of the SRF and for avoiding uncontrolled combustion.

SUBMITTER: Acha E

PROVIDER: S-EPMC8587669 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Toward Elimination of Soot Emissions from Jet Fuel Combustion.

Project description:Soot from jet fuel combustion in aircraft engines contributes to global warming through the formation of contrail cirrus clouds that make up to 56% of the total radiative forcing from aviation. Here, the elimination of such emissions is explored through N2 injection (containing 0-25 vol % O2) at the exhaust of enclosed spray combustion of jet fuel that nicely emulates aircraft soot emissions. It is shown that injecting N2 containing 5 vol % of O2 enhances the formation of polyaromatic hydrocarbons (PAHs) that adsorb on the surface of soot. This increases soot number density and volume fraction by 25 and 80%, respectively. However, further increasing the O2 concentration to 20 or 25 vol % enhances oxidation and nearly eliminates soot emissions from jet fuel spray combustion, reducing the soot number density and volume fraction by 87.3 or 95.4 and 98.3 or 99.6%, respectively. So, a judicious injection of air just after the aircraft engine exhaust can drastically reduce soot emissions and halve the radiative forcing due to aviation, as shown by soot mobility, X-ray diffraction, Raman spectroscopy, nitrogen adsorption, microscopy, and thermogravimetric analysis (for the organic to total carbon ratio) measurements.

| S-EPMC10357563 | biostudies-literature

Economic Case for Replacing High-Emitting Peaker Plants with Fuel Cells for Automotive Applications.

Project description:The identification of clean and cost-effective solutions to replace high-emitting peaker plants and support a just transition is a challenge faced by utilities across the US today. However, falling costs of hydrogen production as well as the widespread availability of fuel cells for automotive applications have made them an attractive option for a zero-emission peak power supply. This study evaluates the techno-economics, operation, and environmental justice impacts of siting a peaker plant based on fuel cells for automotive applications through the lens of the existing Intermountain Power Plant, in order to supply peak power to the Los Angeles basin. Compared to the fossil fuel-fired peakers in operation today, the fuel cell peaker would be lower-cost up to a 17% capacity factor with Inflation Reduction Act incentives while also reducing air pollution in environmental justice communities. With corresponding transmission upgrades, the Intermountain site could host up to a 5 GW fuel cell peaker in the future.

| S-EPMC11360034 | biostudies-literature

Emission of oxygenated polycyclic aromatic hydrocarbons from indoor solid fuel combustion.

Project description:Indoor solid fuel combustion is a dominant source of polycyclic aromatic hydrocarbons (PAHs) and oxygenated PAHs (OPAHs) and the latter are believed to be more toxic than the former. However, there is limited quantitative information on the emissions of OPAHs from solid fuel combustion. In this study, emission factors of OPAHs (EF(OPAH)) for nine commonly used crop residues and five coals burnt in typical residential stoves widely used in rural China were measured under simulated kitchen conditions. The total EF(OPAH) ranged from 2.8 ± 0.2 to 8.1 ± 2.2 mg/kg for tested crop residues and from 0.043 to 71 mg/kg for various coals and 9-fluorenone was the most abundant specie. The EF(OPAH) for indoor crop residue burning were 1-2 orders of magnitude higher than those from open burning, and they were affected by fuel properties and combustion conditions, like moisture and combustion efficiency. For both crop residues and coals, significantly positive correlations were found between EFs for the individual OPAHs and the parent PAHs. An oxygenation rate, R(o), was defined as the ratio of the EFs between the oxygenated and parent PAH species to describe the formation potential of OPAHs. For the studied OPAH/PAH pairs, mean R(o) values were 0.16-0.89 for crop residues and 0.03-0.25 for coals. R(o) for crop residues burned in the cooking stove were much higher than those for open burning and much lower than those in ambient air, indicating the influence of secondary formation of OPAH and loss of PAHs. In comparison with parent PAHs, OPAHs showed a higher tendency to be associated with particulate matter (PM), especially fine PM, and the dominate size ranges were 0.7-2.1 ?m for crop residues and high caking coals and <0.7 ?m for the tested low caking briquettes.

| S-EPMC3104500 | biostudies-literature

Visualization of Combustion Phases of Biomass Particles: Effects of Fuel Properties.

Project description:This work established a high-speed camera-assisted visualization system that investigated the effect of volatile matter and fixed carbon content in biomass particles on single-particle combustion phases and their luminous properties. Three types of biomass particles, namely, sawdust (a mixture of pine and willow), corncob, and rice husk, were examined on a Hencken flat-flame burner. The luminous region and intensity of single biomass particles were closely related to the flammability and calorific value of biomass fuel and derived by analyzing a sequence of images captured using a high-speed camera. The combustion temperature was determined through analysis of its radiant energy. The results showed that the ignition mechanisms of volatile matter and fixed carbon corresponded to homogeneous and heterogeneous reactions, respectively. The maximum luminous region values of 1.75 × 106, 2.1 × 106, and 1.0 × 106 μm2 for sawdust (SD), corncob (CC), and rice husk (RH) correlated to the volatile matter content of each biomass sample, which was 69.38, 74.15, and 64.56%, respectively. Because of the high fixed carbon content, the peak temperature of the SD particles could reach 1549 °C. The luminous region and intensity of the combusting particles were significantly affected by the volatile matter and fixed carbon, respectively.

| S-EPMC8552231 | biostudies-literature

Study of Emissions from Domestic Solid-Fuel Stove Combustion in Ireland.

Project description:Solid-fuel stoves are at the heart of many homes not only in developing nations, but also in developed regions where there is significant deployment of such heating appliances. They are often operated inefficiently and in association with high emission fuels like wood. This leads to disproportionate air pollution contributions. Despite the proliferation of these appliances, an understanding of particulate matter (PM) emissions from these sources remains relatively low. Emissions from five solid fuels are quantified using a "conventional" and an Ecodesign stove. PM measurements are obtained using both "hot filter" sampling of the raw flue gas, and sampling of cooled, diluted flue gas using an Aerosol Chemical Speciation Monitor and AE33 aethalometer. PM emissions factors (EF) derived from diluted flue gas incorporate light condensable organic compounds; hence they are generally higher than those obtained with "hot filter" sampling, which do not. Overall, the PM EFs ranged from 0.2 to 108.2 g GJ-1 for solid fuels. The PM EF determined for a solid fuel depends strongly on the measurement method employed and on user behavior, and less strongly on secondary air supply and stove type. Kerosene-based firelighters were found to make a disproportionately high contribution to PM emissions. Organic aerosol dominated PM composition for all fuels, constituting 50-65% of PM from bituminous and low-smoke ovoids, and 85-95% from torrefied olive stone (TOS) briquettes, sod peat, and wood logs. Torrefied biomass and low-smoke ovoids were found to yield the lowest PM emissions. Substituting these fuels for smoky coal, peat, and wood could reduce PM2.5 emissions by approximately 63%.

| S-EPMC8277100 | biostudies-literature

Towards Highly Performing and Stable PtNi Catalysts in Polymer Electrolyte Fuel Cells for Automotive Application.

Project description:In order to help the introduction on the automotive market of polymer electrolyte fuel cells (PEFCs), it is mandatory to develop highly performing and stable catalysts. The main objective of this work is to investigate PtNi/C catalysts in a PEFC under low relative humidity and pressure conditions, more representative of automotive applications. Carbon supported PtNi nanoparticles were prepared by reduction of metal precursors with formic acid and successive thermal and leaching treatments. The effect of the chemical composition, structure and surface characteristics of the synthesized samples on their electrochemical behavior was investigated. The catalyst characterized by a larger Pt content (Pt₃Ni₂/C) presented the highest catalytic activity (lower potential losses in the activation region) among the synthesized bimetallic PtNi catalysts and the commercial Pt/C, used as the reference material, after testing at high temperature (95 °C) and low humidification (50%) conditions for automotive applications, showing a cell potential (ohmic drop-free) of 0.82 V at 500 mA·cm-2. In order to assess the electro-catalysts stability, accelerated degradation tests were carried out by cycling the cell potential between 0.6 V and 1.2 V. By comparing the electrochemical and physico-chemical parameters at the beginning of life (BoL) and end of life (EoL), it was demonstrated that the Pt₁Ni₁/C catalyst was the most stable among the catalyst series, with only a 2% loss of voltage at 200 mA·cm-2 and 12.5% at 950 mA·cm-2. However, further improvements are needed to produce durable catalysts.

| S-EPMC5503373 | biostudies-literature

Household Air Pollution From Solid Cooking Fuel Combustion and Female Breast Cancer.

Project description:Background: Women bear a large share of disease burden caused by household air pollution due to their great involvement in domestic activities. Pollutant emissions are believed to vary by exposure patterns such as cooking and space heating. Little is known about the independent effect of solid cooking fuel combustion on breast cancer risk. We aimed to examine the association of indoor coal and wood combustion for cooking with breast cancer risk. Methods: During June 2004-July 2008, participants aged 30-79 from 10 diverse regions across China were enrolled in the China Kadoorie Biobank. Primary cooking fuel use information in up to three residences was self-reported at baseline. Multivariable logistic regression models yielded adjusted odds ratios (ORs) and 95% confidence intervals (CIs). Results: A total of 290,396 female participants aged 30-79 were included in the main analysis. Compared with long-term clean fuel users, the fully adjusted ORs were 2.07 (95%CI: 1.37-3.13) for long-term coal users, 1.12 (95% CI: 0.72-1.76) for long-term wood users, and 0.98 (95% CI: 0.55-1.74) for those who used mixed solid fuels to cook. Those who had switched from solid to clean fuels did not have an excess risk of breast cancer (OR: 0.88, 95%CI 0.71-1.10). Conclusion: Long-term solid fuel combustion for cooking may increase the risk of breast cancer. The strength of association is stronger among coal users than wood users. Targeted interventions are needed to accelerate the access to clean and affordable energy.

| S-EPMC8371394 | biostudies-literature

Datasets for high hydrogen content syngas fuel variability effect on combustion physicochemical properties.

Project description:The dataset presented in this article is related to the uncertainty quantification of fuel variability effect on high hydrogen content syngas combustion physicochemical properties. The 1D flame data included in this dataset are collected using PREMIX module available in Chemkin-Pro. Inputs to and outputs collected from the PREMIX module are generated and post-processed using UQTk-3.0.4, an open-access uncertainty quantification (UQ) toolkit developed at Sandia National Laboratories. The 1D flame data here refers to the calculation of flame speed, flame temperature, NO emission, etc. using three detailed chemical mechanisms: the GRI-Mech 3.0, the San Diego, and the NUI Galway Mechanism. The main analysis performed using UQTk-3.0.4 focuses on obtaining main and joint sensitivity effects (Sobol Indices) of uniformly distributed fuel uncertainty on 1D premixed physicochemical property. Other parameters such as the resulted probability density function or fluctuation of these properties are also explored. This new and original dataset is suitable for further analyzing fuel variability effect on other significant flame controlling parameters such as Karlovitz number, flame thickness, etc. in the discipline of turbulent combustion simulation.

| S-EPMC6992945 | biostudies-literature

Flying cars economically favor battery electric over fuel cell and internal combustion engine.

Project description:Flying cars, essentially vertical takeoff and landing aircraft (VTOL), are an emerging, disruptive technology that is expected to reshape future transportation. VTOLs can be powered by battery electric, fuel cell, or internal combustion engine, which point to entirely different needs for industry expertise, research & development, supply chain, and infrastructure supports. A pre-analysis of the propulsion technology competition is crucial to avoid potential wrong directions of research, investment, and policy making efforts. In this study, we comprehensively examined the cost competitiveness of the three propulsion technologies. Here we show that battery electric has already become the lowest-cost option for below-200-km VTOL applications, covering intra-city and short-range inter-city travels. This cost advantage can be robustly strengthened in the long term under various technology development scenarios. Battery energy density improvement is the key to reducing cost. In particular, a 600 Wh/kg battery energy density provides battery electric with all-range cost advantage, and promises high return in business. Fuel cell and internal combustion engine, under certain technology development scenarios, can obtain cost advantage in long-range applications, but face intense competition from ground transportation such as high-speed rail. The findings suggest a battery-electric-prioritized VTOL development strategy, and the necessity of developing VTOL-customized high-energy-density batteries.

| S-EPMC10013336 | biostudies-literature

Chemical Kinetic Model of Multicomponent Gasoline Surrogate Fuel with Nitric Oxide in HCCI Combustion.

Project description:This study presents a simplified mechanism of a five-component gasoline surrogate fuel (TDRF-NO) that includes n-heptane, isooctane, toluene, diisobutylene (DIB) and nitric oxide (NO). The mechanism consists of 119 species and 266 reactions and involves TDRF and NO submechanisms. Satisfactory results were obtained in simulating HCCI combustion in engines. The TDRF submechanism is based on the simplified mechanism of toluene reference fuel (TRF) and adds DIB to form quaternary surrogate fuel for gasoline. A simplified NO submechanism containing 33 reactions was added to the simplified mechanism of TDRF, considering the effect of active molecular NO on the combustion of gasoline fuel. The ignition delay data of the shock tube under different pressure and temperature conditions verified the validity of the model. Model verification results showed that the ignition delay time predicted by the simplified mechanism and its submechanics were consistent with the experimental data. The addition of NO caused the ignition delay time of the mechanism simulation to advance with increasing concentration of NO added. The established simplified mechanism effectively predicted the actual combustion and ignition of gasoline.

| S-EPMC7287883 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data