Browse
Submit Data
Databases
API
Help

Dataset Information

13 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Multipurpose Processing Additives for Silica/Rubber Composites: Synthesis, Characterization, and Application

ABSTRACT: Processing additives are a special group of chemicals included in rubber formulations to facilitate the flowability of the resultant compounds. Their addition generally affects the cured properties of the subsequent rubber composites, and fine-tuning of the compound formulation is therefore required. In this work, an attempt has been made to address this issue through the preparation of new bio-based processing additives capable of promoting the mixing of the rubber compound while at the same time enhancing mechanical properties following curing. A significant decrease in the mixing energy at the first stage of mixing (~10%) has been observed by substituting only a small percentage of the conventional petroleum-derived process oil with aminated epoxidized soybean oil. Concomitantly, it is found that this aminated epoxidized soybean oil promotes rubber curing and increases the tensile strength of the final composite by ~20% compared to the control.

SUBMITTER: Datta Sarma A

PROVIDER: S-EPMC8587921 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Characterization of WO<sub>3</sub>/Silicone Rubber Composites for Hydrogen-Sensitive Gasochromic Application.

Project description:WO3 and silicone rubber (SR)-based gasochromic composites were fabricated to detect hydrogen leaks at room temperature. WO3 rod-like nanostructures were uniformly distributed in the SR matrix, with a particle size of 60-100 nm. The hydrogen permeability of these composites reached 1.77 cm3·cm/cm2·s·cmHg. At a 10% hydrogen concentration, the visible light reflectance of the composite decreased 49% during about 40 s, with a color change rate of 6.4% s-1. Moreover, the composite detected hydrogen concentrations as low as 0.1%. And a color scale was obtained for easily assessing hydrogen concentrations in the environment based on the color of composites. Finally, the composite materials as disposable sensors underwent testing at several Sinopec hydrogen refueling stations.

| S-EPMC11314044 | biostudies-literature

Surface Treatment Effects on the Mechanical Properties of Silica Carbon Black Reinforced Natural Rubber/Butadiene Rubber Composites.

Project description:For the first time, phenolic formaldehyde resin (PF)-treated silica carbon black (SiCB) were prepared with different treatment conditions and their effect as fillers on the mechanical properties of filler filled natural rubber/butadiene rubber (NR/BR) composites were investigated in detail. The PF coating layer on the SiCB derived from rusk husk not only promoted the dispersion of the fillers but also improved the interfacial interactions between fillers and the rubber matrix. As a result, both the cross-link density and mechanical properties of the obtained composites were effectively enhanced. The filler SiCB with 3 wt % PF surface treatment greatly improved the tensile strength of NR/BR composites and reached 7.1 MPa, which increased by 73.7% compared with that of SiCB-filled NR/BR composites. The improved interfacial interactions promoted higher energy dissipation, leading to simultaneously enhancing the glass transition temperature of the obtained composites. Due to the easy processing and low cost of filler as well as the effectively enhanced mechanical properties of composites, the PF-coating methodology has a great potential for practical applications in SiCB reinforced high-performance composites. A commercial filler, carbon black (N774), was also used in this study and evaluated under the same conditions for comparison.

| S-EPMC6918317 | biostudies-literature

Synthesis and Properties of a Novel Reactive and Low-Migration-Resistant Antioxidant and Its Application in Rubber Composites

Project description: Not available

| S-EPMC10993244 | biostudies-literature

Formation Mechanism of Multipurpose Silica Nanocapsules.

Project description:Core-shell structures containing active materials can be fabricated using almost infinite reactant combinations. A mechanism to describe their formation is therefore useful. In this work, nanoscale all-silica shell capsules with an aqueous core were fabricated by the HCl-catalyzed condensation of tetraethyl orthosilicate (TEOS), using Pickering emulsion templates. Pickering emulsions were fabricated using modified commercial silica (LUDOX TMA) nanoparticles as stabilizers. By following the reaction over a 24 h period, a general mechanism for their formation is suggested. The interfacial activity of the Pickering emulsifiers heavily influenced the final capsule products. Fully stable Pickering emulsion templates with interfacially active particles allowed a highly stable sub-micrometer (500-600 nm) core-shell structure to form. Unstable Pickering emulsions, i.e., where interfacially inactive silica nanoparticles do not adsorb effectively to the interface and produce only partially stable emulsion droplets, resulted in capsule diameter increasing markedly (1+ μm). Scanning electron microscope (SEM) and transmission electron microscope (TEM) measurements revealed the layered silica "colloidosome" structure: a thin yet robust inner silica shell with modified silica nanoparticles anchored to the outer interface. Varying the composition of emulsion phases also affected the size of capsule products, allowing size tuning of the capsules. Silica capsules are promising protective nanocarriers for hydrophilic active materials in applications such as heat storage, sensors, and drug delivery.

| S-EPMC8057668 | biostudies-literature

Properties of vulcanized polyisoprene rubber composites filled with opalized white tuff and precipitated silica.

Project description:Opalized white tuff (OWT) with 40 μm average particle size and 39.3 m(2)/g specific surface area has been introduced into polyisoprene rubber (NR). Their reinforcing effects were evaluated by comparisons with those from precipitated silica (PSi). The cure characteristic, apparent activation energy of cross-link (E(ac)) and reversion (E(ar)), and mechanical properties of a variety of composites based on these rubbers were studied. This was done using vulcanization techniques, mechanical testing, and scanning electron microscopy (SEM). The results showed that OWT can greatly improve the vulcanizing process by shortening the time of optimum cure (t(c90)) and the scorch time (t(s2)) of cross-linked rubber composites, which improves production efficiency and operational security. The rubber composites filled with 50 phr of OWT were found to have good mechanical and elastomeric properties. The tensile strengths of the NR/OWT composites are close to those of NR/PSi composites, but the tear strength and modulus are not as good as the corresponding properties of those containing precipitated silica. Morphology results revealed that the OWT is poorly dispersed in the rubber matrix. According to that, the lower interactions between OWT and polyisoprene rubber macromolecules are obtained, but similar mechanical properties of NR/OWT (100/50) rubber composites compared with NR/PSi (100/50) rubber composites are resulted.

| S-EPMC3933396 | biostudies-other

Microwave-Assisted Fabrication of Mesoporous Silica-Calcium Phosphate Composites for Dental Application.

Project description:Herein, the microwave-assisted wet precipitation method was used to obtain materials consisting of mesoporous silica (SBA-15) and calcium orthophosphates (CaP). Composites were prepared through immersion of mesoporous silica in different calcification coating solutions and then exposed to microwave radiation. The composites were characterized in terms of molecular structure, crystallinity, morphology, chemical composition, and mineralization potential by Fourier-transform infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), and scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy (SEM-EDX). The application of microwave irradiation resulted in the formation of different types of calcium orthophosphates such as calcium deficient hydroxyapatite (CDHA), octacalcium phosphate (OCP), and amorphous calcium phosphate (ACP) on the SBA-15 surface, depending on the type of coating solution. The composites for which the progressive formation of hydroxyapatite during incubation in simulated body fluid was observed were further used in the production of final pharmaceutical forms: membranes, granules, and pellets. All of the obtained pharmaceutical forms preserved mineralization properties.

| S-EPMC7796352 | biostudies-literature

Highly Conducting, Sustainable, Nanographitic Rubber Composites.

Project description:Environmentally friendly multifunctional rubber composites are reported. Graphitic nanocarbon (NC) deriving from cracking of biogas (methane/carbon dioxide) and natural rubber extracted directly from the Hevea brasiliensis tree are the two components of these composites produced via latex technology. While maintaining and enhancing the intrinsic thermal and mechanical characteristics of rubber, the presence of NC shows a significant improvement on the electrical response. For a 10 wt % NC content, a 1010-fold increase in conductivity has been achieved with a conductivity value of 7.5 S·m-1, placing these composites among the best obtained using other carbon fillers. In addition, the piezoresistive behavior has also been verified. These promising green composites have a potential use in a variety of applications such as sealing of electronic devices and sensors.

| S-EPMC6641372 | biostudies-literature

Original Basic Activation for Enhancing Silica Particle Reactivity: Characterization by Liquid Phase Silanization and Silica-Rubber Nanocomposite Properties.

Project description:Silica fillers are used in various nanocomposites in combination with silanes as a reinforcing filler. In tire technology, silica is generally functionalized before (pre-treated) or during mixing (in-situ silanization or post-treated). In both cases, a soft base catalyst (e.g., triethylamine or diphenyl guanidine, DPG) is typically used to accelerate and increase the yield of the silane/silica coupling reaction. In this study, we investigated how pre-treatments of silica particles with either strong amine or hydride bases impact the silanization of silica prior to or during SBR mixing for silica-rubber nanocomposite fabrication. Our findings are supported by molecular characterization (solid state 29Si NMR, 1H NMR and TGA), and scanning electron microscopy. In addition, the impact of these silica pre-treatments on a nanocomposite's mechanical properties was evaluated using dynamic mechanical analysis (DMA).

| S-EPMC9105500 | biostudies-literature

Preparation of Silica Aerogel/Resin Composites and Their Application in Dental Restorative Materials.

Project description:As the most advanced aerogel material, silica aerogel has had transformative industrial impacts. However, the use of silica aerogel is currently limited to the field of thermal insulation materials, so it is urgent to expand its application into other fields. In this work, silica aerogel/resin composites were successfully prepared by combining silica aerogel with a resin matrix for dental restoration. The applications of this material in the field of dental restoration, as well as its performance, are discussed in depth. It was demonstrated that, when the ratio of the resin matrix Bis-GMA to TEGDMA was 1:1, and the content of silica aerogel with 50 μm particle size was 12.5%, the composite achieved excellent mechanical properties. The flexural strength of the silica aerogel/resin composite reached 62.9546 MPa, which was more than five times that of the pure resin. Due to the presence of the silica aerogel, the composite also demonstrated outstanding antibacterial capabilities, meeting the demand for antimicrobial properties in dental materials. This work successfully investigated the prospect of using commercially available silica aerogels in dental restorative materials; we provide an easy method for using silica aerogels as dental restorative materials, as well as a reference for their application in the field of biomedical materials.

| S-EPMC9323775 | biostudies-literature

Synthesis, Characterization, and Application of Amorphous Silica-Aluminas Support for Fischer-Tropsch Wax Hydrocracking Catalysts.

Project description:High-performance amorphous silica-aluminas (ASAs) were prepared prior to the formation of the 10-membered ring (10-MR) ZSM-5 zeolite by regulating the hydrothermal processing time. Their structures, morphologies, acidity properties, and Si-Al coordination were well studied. Particularly, a facile FTIR method of in-situ adsorbing bulky 2,6-dimethlypyridine followed by pyridine adsorption was innovatively utilized to quantify the Brønsted acid sites in micropores. All the ASAs samples were transformed into catalysts by loading with 0.5 wt % Pt. The structure-activity relationship, especially from the strength, density, and location of Brønsted acid sites, was investigated by Fischer-Tropsch synthesis (FTS) wax hydrocracking. The evaluation results showed that the medium strong Brønsted acid sites located on the external surface played a crucial role in the activity. Contrary to the general belief that larger pores favor the production of heavy cracking fractions, the ASAs with a 10-MR microporous structure proved to be more effective for diesel production than those with a 12-membered ring (12-MR). Strong Brønsted acid sites in micropores were less conducive to diesel production mainly due to stronger adsorption at these sites and steric hindrance from the microporous system. Furthermore, the Pt/AS-20 catalyst with few intramicropore Brønsted acid sites exhibited high diesel selectivity (83.3%) at 50.5% conversion under industrially relevant reaction conditions, which provides a significant opportunity to develop FTS wax hydrocracking catalysts more rationally.

| S-EPMC11360031 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data