Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Chromium-Salophen as a Soluble or Silica-Supported Co-Catalyst for the Fixation of CO2 Onto Styrene Oxide at Low Temperatures

ABSTRACT: Addition of a soluble or a supported CrIII-salophen complex as a co-catalyst greatly enhances the catalytic activity of Bu4NBr for the formation of styrene carbonate from styrene epoxide and CO2. Their combination with a very low co-catalyst:Bu4NBr:styrene oxide molar ratio = 1:2:112 (corresponding to 0.9 mol% of CrIII co-catalyst) led to an almost complete conversion of styrene oxide after 7 h at 80°C under an initial pressure of CO2 of 11 bar and to a selectivity in styrene carbonate of 100%. The covalent heterogenization of the complex was achieved through the formation of an amide bond with a functionalized {NH2}-SBA-15 silica support. In both conditions, the use of these CrIII catalysts allowed excellent conversion of styrene already at 50°C (69 and 47% after 24 h, respectively, in homogeneous and heterogeneous conditions). Comparison with our previous work using other metal cations from the transition metals particularly highlights the preponderant effect of the nature of the metal cation as a co-catalyst in this reaction, that may be linked to its calculated binding energy to the epoxides. Both co-catalysts were successfully reused four times without any appreciable loss of performance.

SUBMITTER: Balas M

PROVIDER: S-EPMC8588859 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Integrated CO2 capture-fixation chemistry via interfacial ionic liquid catalyst in laminar gas/liquid flow.

Project description:Simultaneous capture of carbon dioxide (CO2) and its utilization with subsequent work-up would significantly enhance the competitiveness of CO2-based sustainable chemistry over petroleum-based chemistry. Here we report an interfacial catalytic reaction platform for an integrated autonomous process of simultaneously capturing/fixing CO2 in gas-liquid laminar flow with subsequently providing a work-up step. The continuous-flow microreactor has built-in silicon nanowires (SiNWs) with immobilized ionic liquid catalysts on tips of cone-shaped nanowire bundles. Because of the superamphiphobic SiNWs, a stable gas-liquid interface maintains between liquid flow of organoamines in upper part and gas flow of CO2 in bottom part of channel. The intimate and direct contact of the binary reagents leads to enhanced mass transfer and facilitating reactions. The autonomous integrated platform produces and isolates 2-oxazolidinones and quinazolines-2,4(1H,3H)-diones with 81-97% yields under mild conditions. The platform would enable direct CO2 utilization to produce high-valued specialty chemicals from flue gases without pre-separation and work-up steps.

| S-EPMC5343516 | biostudies-literature

Active catalyst construction for CO2 recycling via catalytic synthesis of N-doped carbon on supported Cu.

Project description:Bridging homogeneous and heterogeneous catalysis is a long-term pursuit in the field of catalysis. Herein, we report our results in integration of nano- and molecular catalysis via catalytic synthesis of nitrogen doped carbon layers on AlOx supported nano-Cu which can finely tune the catalytic performance of the supported copper catalyst. This synthetic catalytic material, which can be generated in situ by the reaction of CuAlOx and 1,10-Phen in the presence of hydrogen, could be used for controllable synthesis of N,N-dimethylformamide (DMF) from dimethylamine and CO2/H2 via blocking reaction pathways of further catalytic hydrogenation of DMF to N(CH3)3. Detailed characterizations and DFT calculations reveal that the presence of N-doped layered carbon on the surface of the nano-Cu particles results in higher activation energy barriers during the conversion of DMF to N(CH3)3. Our primary results could promote merging of homogeneous catalysis and heterogeneous catalysis and CO2 recycling.

| S-EPMC6565717 | biostudies-literature

Something special about CO-dependent CO2 fixation.

Project description:Carbon dioxide enters metabolism via six known CO2 fixation pathways, of which only one is linear, exergonic in the direction of CO2 -assimilation, and present in both bacterial and archaeal anaerobes - the Wood-Ljungdahl (WL) or reductive acetyl-CoA pathway. Carbon monoxide (CO) plays a central role in the WL pathway as an energy rich intermediate. Here, we scan the major biochemical reaction databases for reactions involving CO and CO2 . We identified 415 reactions corresponding to enzyme commission (EC) numbers involving CO2 , which are non-randomly distributed across different biochemical pathways. Their taxonomic distribution, reversibility under physiological conditions, cofactors and prosthetic groups are summarized. In contrast to CO2 , only 15 reaction classes involving CO were detected. Closer inspection reveals that CO interfaces with metabolism and the carbon cycle at only two enzymes: anaerobic carbon monoxide dehydrogenase (CODH), a Ni- and Fe-containing enzyme that generates CO for CO2 fixation in the WL pathway, and aerobic CODH, a Mo- and Cu-containing enzyme that oxidizes environmental CO as an electron source. The CO-dependent reaction of the WL pathway involves carbonyl insertion into a methyl carbon-nickel at the Ni-Fe-S A-cluster of acetyl-CoA synthase (ACS). It appears that no alternative mechanisms to the CO-dependent reaction of ACS have evolved in nearly 4 billion years, indicating an ancient and mechanistically essential role for CO at the onset of metabolism.

| S-EPMC6282760 | biostudies-literature

CO2 utilization as a soft oxidant for the synthesis of styrene from ethylbenzene over Co3O4 supported on magnesium aluminate spinel: role of spinel activation temperature.

Project description:Magnesium aluminate spinel (MgAl2O4) supported Co3O4 catalysts are synthesized and tested for the oxidative dehydrogenation (ODH) of ethylbenzene using CO2 as a soft oxidant. The effect of spinel calcination temperature on the catalytic performance has been systematically investigated. With an increase in the activation temperature from 600 to 900 °C, the active presence of a single-phase MgAl2O4 spinel is observed. A catalyst series consisting of MgAl2O4 spinel with varying Co loadings (10-20 wt%) were prepared and systematically distinguished by ICP, XRD, BET, TPR, NH3-TPD, UV-Vis DRS, FT-IR, XPS, SEM, and TEM. Among the tested cobalt catalysts, 15Co/800MA sample derived by calcination of MgAl2O4 support at 800 °C exhibits the most excellent catalytic performance with the maximum ethylbenzene conversion (≥ 82%). Also, high yields of styrene (≥ 81%) could be consistently achieved on the same active catalyst. Further, the catalyst exhibited almost stable activity during 20 h time-on-stream with a slow decrease in the ethylbenzene conversion from 82 to 59%. However, the selectivity of styrene (98%) stayed almost constant during the reaction. Activation of the MgAl2O4 spinel at 800 °C facilitates a dramatic chemical homogeneity for the alignment of Co3O4 nanoparticles on the surface of the active catalyst. Moreover, the isolated Co3O4 clusters have a strong chemical/electronic interaction with the Mg2+ and Al3+ ions on the support perform a crucial role to achieve the maximum catalytic activity.

| S-EPMC7747735 | biostudies-literature

CO2 Fixation with Epoxides under Mild Conditions with a Cooperative Metal Corrole/Quaternary Ammonium Salt Catalyst System.

Project description:The cooperative catalytic activity of several metal corrole complexes in combination with tetrabutyl-ammonium bromide (TBAB) has been investigated for the reaction of epoxides with CO2 leading to cyclic carbonates. It was found that the use of just 0.05 mol % of a manganese(III)corrole with 2 mol % TBAB exhibits excellent catalytic activity under an atmosphere of CO2 .

| S-EPMC5446785 | biostudies-literature

The Role of Catalyst Support, Diluent and Co-Catalyst in Chromium-Mediated Heterogeneous Ethylene Trimerisation.

Project description:Sequential treatment of a previously-calcined solid oxide support (i.e. SiO2, γ-Al2O3, or mixed SiO2-Al2O3) with solutions of Cr{N(SiMe3)2}3 (0.71 wt% Cr) and a Lewis acidic alkyl aluminium-based co-catalyst (15 molar equivalents) affords initiator systems active for the oligomerisation and/or polymerisation of ethylene. The influence of the oxide support, calcination temperature, co-catalyst, and reaction diluent on both the productivity and selectivity of the immobilised chromium initiator systems have been investigated, with the best performing combination (SiO2-600, modified methyl aluminoxane-12 {MMAO-12}, heptane) producing a mixture of hexenes (61 wt%; 79% 1-hexene), and polyethylene (16 wt%) with an activity of 2403 g gCr -1 h-1. The observed product distribution is rationalised by two competing processes: trimerisation via a supported metallacycle-based mechanism and polymerisation through a classical Cossee-Arlman chain-growth pathway. This is supported by the indirect observation of two distinct chromium environments at the surface of the oxide support by a solid-state 29Si NMR spectroscopic study of the Cr{N(SiMe3)2}x/SiO2-600 pro-initiator.

| S-EPMC6413812 | biostudies-literature

Alumina-Supported Alpha-Iron(III) Oxyhydroxide as a Recyclable Solid Catalyst for CO2 Photoreduction under Visible Light.

Project description:Photocatalytic conversion of CO2 into transportable fuels such as formic acid (HCOOH) under sunlight is an attractive solution to the shortage of energy and carbon resources as well as to the increase in Earth's atmospheric CO2 concentration. The use of abundant elements as the components of a photocatalytic CO2 reduction system is important, and a solid catalyst that is active, recyclable, nontoxic, and inexpensive is strongly demanded. Here, we show that a widespread soil mineral, alpha-iron(III) oxyhydroxide (α-FeOOH; goethite), loaded onto an Al2 O3 support, functions as a recyclable catalyst for a photocatalytic CO2 reduction system under visible light (λ>400 nm) in the presence of a RuII photosensitizer and an electron donor. This system gave HCOOH as the main product with 80-90 % selectivity and an apparent quantum yield of 4.3 % at 460 nm, as confirmed by isotope tracer experiments with 13 CO2 . The present work shows that the use of a proper support material is another method of catalyst activation toward the selective reduction of CO2 .

| S-EPMC9325401 | biostudies-literature

Poly(styrene)-supported N-heterocyclic carbene coordinated iron chloride as a catalyst for delayed polyurethane polymerization.

Project description:An advanced organometallic catalyst based on N-heterocyclic carbene (NHC) coordinated FeCl3 has been synthesized and used to control the reaction rate in polyurethane (PUR) polymerization. The imidazolium (Im)-based NHC was functionalized on the surface of the supporting material of bead-type chloromethyl polystyrene (PS) resin. The PS-Im-FeCl3 catalyst was synthesized through the coordination reaction between Im and FeCl3. The successful formation, functional groups, structure, and geometry of the PS-Im-FeCl3 catalysts were confirmed by Fourier transform infrared and X-ray photoelectron spectroscopy techniques. A thin layer of Im was observed to be coated uniformly on the PS bead surface and FeCl3 nanoparticles were observed to cover the coating layer homogeneously, as determined by field-emission scanning electron microscopy, transmission electron microscopy, and energy dispersive X-ray spectroscopy measurements. The PUR polymerization reaction was investigated through viscosity measurements and non-isothermal activation energy calculations by differential scanning calorimetry analysis. Based on the viscosity measurements, delayed PUR polymerization was achieved using the PS-Im-FeCl3 catalyst system. The highest viscosity (6000 cP) was achieved without any catalyst, with triphenylene bismuth, and with the PS-Im-FeCl3 catalyst after 23, 5, and 25 h of reaction time, respectively. Furthermore, the calculated activation energies (E a) were 27.92 and 36.35 kJ mol-1 for the no-catalyst and the PS-Im-FeCl3 systems, respectively. Thus, the viscosity measurements and DSC analyses confirm that the PS-Im-FeCl3 catalyst considerably increases the PUR reaction time. The Im-FeCl3 catalyst supported by CMPS can control the reaction rate in PUR synthesis because of its high activity. Thus, the PS-Im-FeCl3 catalyst can be used as a curing retardant in the PUR industry.

| S-EPMC9089435 | biostudies-literature

Single PEDOT Catalyst Boosts CO2 Photoreduction Efficiency.

Project description:Atmospheric pollution demands the development of solar-driven photocatalytic technologies for the conversion of CO2 into a fuel; state-of-the-art cocatalyst systems demonstrate conversion efficiencies currently unattainable by a single catalyst. Here, we upend the status quo demonstrating that the nanofibrillar conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) is a record-breaking single catalyst for the photoreduction of CO2 to CO. This high catalytic efficiency stems from a highly conductive nanofibrillar structure that significantly enhances surface area, CO2 adsorption and light absorption. Moreover, the polymer's band gap is optimized via chemical doping/dedoping treatments using hydrochloric acid, ammonia hydroxide, and hydrazine. The hydrazine-treated PEDOT catalyst exhibits 100% CO yield under a stable regime (>10 h) with a maximum rate of CO evolution (3000 μmol gcat -1 h-1) that is 2 orders of magnitude higher than the top performing single catalyst and surpassed only by three other cocatalyst systems. Nanofibrillar PEDOT provides a new direction for designing the next generation of high-efficiency photoreduction catalysts.

| S-EPMC8554841 | biostudies-literature

Current forest carbon fixation fuels stream CO2 emissions.

Project description:Stream CO2 emissions contribute significantly to atmospheric climate forcing. While there are strong indications that groundwater inputs sustain these emissions, the specific biogeochemical pathways and timescales involved in this lateral CO2 export are still obscure. Here, via an extensive radiocarbon (14C) characterisation of CO2 and DOC in stream water and its groundwater sources in an old-growth boreal forest, we demonstrate that the 14C-CO2 is consistently in tune with the current atmospheric 14C-CO2 level and shows little association with the 14C-DOC in the same waters. Our findings thus indicate that stream CO2 emissions act as a shortcut that returns CO2 recently fixed by the forest vegetation to the atmosphere. Our results expose a positive feedback mechanism within the C budget of forested catchments, where stream CO2 emissions will be highly sensitive to changes in forest C allocation patterns associated with climate and land-use changes.

| S-EPMC6478898 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data