Dataset Information

Evaluation of a bioaerosol sampler for indoor environmental surveillance of Severe Acute Respiratory Syndrome Coronavirus 2

ABSTRACT: The worldwide spread of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has ubiquitously impacted many aspects of life. As vaccines continue to be manufactured and administered, limiting the spread of SARS-CoV-2 will rely more heavily on the early identification of contagious individuals occupying reopened and increasingly populated indoor environments. In this study, we investigated the utility of an impaction-based bioaerosol sampling system with multiple nucleic acid collection media. Heat-inactivated SARS-CoV-2 was utilized to perform bench-scale, short-range aerosol, and room-scale aerosol experiments. Through bench-scale experiments, AerosolSense Capture Media (ACM) and nylon flocked swabs were identified as the highest utility media. In room-scale aerosol experiments, consistent detection of aerosol SARS-CoV-2 was achieved at an estimated aerosol concentration equal to or greater than 0.089 genome copies per liter of room air (gc/L) when air was sampled for eight hours or more at less than one air change per hour (ACH). Shorter sampling periods (75 minutes) yielded consistent detection at ~31.8 gc/L of room air and intermittent detection down to ~0.318 gc/L at (at both 1 and 6 ACH). These results support further exploration in real-world testing scenarios and suggest the utility of indoor aerosol surveillance as an effective risk mitigation strategy in occupied buildings.

SUBMITTER: Horve P

PROVIDER: S-EPMC8592464 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:BackgroundDisinfection is one of the most effective ways to block the rapid transmission of severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). Due to the prolonged coronavirus disease 2019 (COVID-19) pandemic, disinfectants have become crucial to prevent person-to-person transmission and decontaminate hands, clothes, facilities and equipment. However, there is a lack of accurate information on the virucidal activity of commercial disinfectants.AimTo evaluate the virucidal efficacy of 72 commercially available disinfectants constituting 16 types of ingredients against SARS-CoV-2.MethodsSARS-CoV-2 was tested with various concentrations of disinfectants at indicated exposure time points as recommended by the manufacturers. The 50% tissue culture infectious dose assay was used to calculate virus titre, and trypan blue staining and CCK-8 were used to assess cell viability after 3-5 days of SARS-CoV-2 infection.FindingsThis study found that disinfectants based on 83% ethanol, 60% propanol/ethanol, 0.00108-0.0011% sodium dichloroisocyanurate and 0.497% potassium peroxymonosulfate inactivated SARS-CoV-2 effectively and safely. Although disinfectants based on 0.05-0.4% benzalkonium chloride (BAC), 0.02-0.07% quaternary ammonium compound (QAC; 1:1), 0.4% BAC/didecyldimethylammonium chloride (DDAC), 0.28% benzethonium chloride concentrate/2-propanol, 0.0205-0.14% DDAC/polyhexamethylene biguanide hydrochloride (PHMB) and 0.5% hydrogen peroxide inactivated SARS-CoV-2 effectively, they exhibited cytotoxicity. Conversely, disinfectants based on 0.04-4% QAC (2:3), 0.00625% BAC/DDAC/PHMB, and 0.0205-0.14% and 0.0173% peracetic acid showed approximately 50% virucidal efficacy with no cytotoxicity. Citric acid (0.4%) did not inactivate SARS-CoV-2.ConclusionThese results indicate that most commercially available disinfectants exert a disinfectant effect against SARS-CoV-2. However, re-evaluation of the effective concentration and exposure time of certain disinfectants is needed, especially citric acid and peracetic acid.

Dataset Information

Evaluation of a bioaerosol sampler for indoor environmental surveillance of Severe Acute Respiratory Syndrome Coronavirus 2

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets