Broadband nonreciprocal linear acoustics through a non-local active metamaterial
Ontology highlight
ABSTRACT:
SUBMITTER: Sasmal A
PROVIDER: S-EPMC8594868 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:In this paper, a broadband metamaterial microwave absorber is designed, simulated and measured. Differently from the traditional method which is only based on unit cell boundary conditions, we carried out full-wave finite integration simulations using full-sized configurations. Starting from an elementary unit cell structure, four kinds of coding metamaterial blocks, 2 × 2, 3 × 3, 4 × 4 and 6 × 6 blocks were optimized and then used as building blocks (meta-block) for the construction of numerous 12 × 12 topologies with a realistic size scale. We found the broadband absorption response in the frequency range 16 GHz to 33 GHz, in good agreement with the equivalent medium theory prediction and experimental observation. Considering various applications of metamaterials or metamaterial absorbers in the electromagnetic wave processing, including the radars or satellite communications, requires the frequency in the range up to 40 GHz. Our study could be useful to guide experimental work. Furthermore, compared to the straightforward approach that represents the metamaterials configurations as 12 × 12 matrices of random binary bits (0 and 1), our new approach achieves significant gains in the broadband absorption. Our method also may be applied to the full-sized structures with arbitrary dimensions, and thus provide a useful tool in the design of metamaterials with specific desired frequency ranges.
| S-EPMC7000747 | biostudies-literature
Project description:We have investigated the Lamb wave propagation in cellular metamaterial plates constructed by bending-dominated and stretch-dominated unit-cells with the stiffness differed by orders of magnitude at an ultralow density. The simulation results show that ultralight metamaterial plates with textured stubs deposited on the surface can support strong local resonances for both symmetric and anti-symmetric modes at low frequencies, where Lamb waves at the resonance frequencies are highly localized in the vibrating stubs. The resonance frequency is very sensitive to the geometry of textured stubs. By reasonable design of the geometry of resonant elements, we establish a simple loaded-bar model with the array of oscillators having a gradient relative density (or weight) that can support multiple local resonances, which permits the feasibility of a broadband Lamb wave trapping. Our study could be potentially significant in designing ingenious weight-efficient acoustic devices for practical applications, such as shock absorption, cushioning, and vibrations traffic, etc.
| S-EPMC4366801 | biostudies-other
Project description:One enduring challenge for controlling high frequency sound in local active noise control (ANC) systems is to obtain the acoustic signal at the specific location to be controlled. In some applications such as in ANC headrest systems, it is not practical to install error microphones in a person's ears to provide the user a quiet or optimally acoustically controlled environment. Many virtual error sensing approaches have been proposed to estimate the acoustic signal remotely with the current state-of-the-art method using an array of four microphones and a head tracking system to yield sound reduction up to 1 kHz for a single sound source. In the work reported in this paper, a novel approach of incorporating remote acoustic sensing using a laser Doppler vibrometer into an ANC headrest system is investigated. In this "virtual ANC headphone" system, a lightweight retro-reflective membrane pick-up is mounted in each synthetic ear of a head and torso simulator to determine the sound in the ear in real-time with minimal invasiveness. The membrane design and the effects of its location on the system performance are explored, the noise spectra in the ears without and with ANC for a variety of relevant primary sound fields are reported, and the performance of the system during head movements is demonstrated. The test results show that at least 10 dB sound attenuation can be realised in the ears over an extended frequency range (from 500 Hz to 6 kHz) under a complex sound field and for several common types of synthesised environmental noise, even in the presence of head motion.
| S-EPMC7695846 | biostudies-literature
Project description:Causality of linear time-invariant systems inherently defines the wave-matter interaction process in wave physics. This principle imposes strict constraints on the interfacial response of materials on various physical platforms. A typical consequence is that a delicate balance has to be struck between the conflicting bandwidth and geometric thickness when constructing a medium with desired impedance, which makes it challenging to realize broadband impedance modulation with compact structures. In pursuit of improvement, the over-damped recipe and the reduced excessive response recipe are creatively presented in this work. As a proof-of-concept demonstration, we construct a metamaterial with intensive mode density that supports strong non-locality over a frequency band from 320 Hz to 6400 Hz. Under the guidelines of the over-damped recipe and the reduced excessive response recipe, the metamaterial realizes impedance matching to air and exhibits broadband near-perfect absorption without evident impedance oscillation and absorption dips in the working frequency band. We further present a dual-functional design capable of frequency-selective absorption and reflection by concentrating the resonance modes in three frequency bands. Our research reveals the significance of over-damped recipe and the strong non-local effect in broadband impedance modulation, which may open up avenues for constructing efficient artificial impedance boundaries for energy absorption and other wave manipulation.
| S-EPMC9440717 | biostudies-literature
Project description:The realization of a semiconductor near-unity absorber in the infrared will provide new capabilities to transform applications in sensing, health, imaging, and quantum information science, especially where portability is required. Typically, commercially available portable single-photon detectors in the infrared are made from bulk semiconductors and have efficiencies well below unity. Here, we design a novel semiconductor nanowire metamaterial, and show that by carefully arranging an InGaAs nanowire array and by controlling their shape, we demonstrate near-unity absorption efficiency at room temperature. We experimentally show an average measured efficiency of 93% (simulated average efficiency of 97%) over an unprecedented wavelength range from 900 to 1500 nm. We further show that the near-unity absorption results from the collective response of the nanowire metamaterial, originating from both coupling into leaky resonant waveguide and transverse modes. These coupling mechanisms cause light to be absorbed directly from the top and indirectly as light scatters from one nanowire to neighbouring ones. This work leads to the possible development of a new generation of quantum detectors with unprecedented broadband near-unity absorption in the infrared, while operating near room temperature for a wider range of applications.
| S-EPMC9188558 | biostudies-literature
Project description:Radiation absorbers have increasingly been attracting attention as crucial components for controllable thermal emission, energy harvesting, modulators, etc. However, it is still challenging to realize thin absorbers which can operate over a wide spectrum range. Here, we propose and experimentally demonstrate thin, broadband, polarization-insensitive and omnidirectional absorbers working in the near-infrared range. We choose titanium (Ti) instead of the commonly used gold (Au) to construct nano-disk arrays on the top of a silicon dioxide (SiO2) coated Au substrate, with the quality (Q) factor of the localized surface plasmon (LSP) resonance being decreased due to the intrinsic high loss of Ti. The combination of this low-Q LSP resonance and the propagating surface plasmon (PSP) excitation resonance, which occur at different wavelengths, is the fundamental origin of the broadband absorption. The measured (at normal light incidence) absorption is over 90% in the wavelength range from 900?nm to 1825?nm, with high absorption persisting up to the incident angle of ~40°. The demonstrated thin-film absorber configuration is relatively easy to fabricate and can be realized with other properly selected materials.
| S-EPMC5175172 | biostudies-literature
Project description:Local active sound control systems provide useful reductions in noise within a zone of quiet which only extends to about one tenth of an acoustic wavelength. If active control is required above a few hundred hertz, this generally limits the movement of a listener to unrealistically small changes in head position. We describe a local active sound control system using a fixed array of monitoring microphones, in which the pressures at the ear positions are estimated from these microphone signals using head position information from an optical head tracker. These signals are then actively controlled to give robust attenuation at the ear positions, even as the listener moves their head. Feedforward control provides selective attenuation of noise and broadband attenuation of around 20?dB is measured up to excitation frequencies of 1?kHz under favourable conditions, with head tracking achieved in a few seconds. The active control performance is thus comparable with that achieved with active headphones, but without the listener having anything attached to their head.
| S-EPMC5876390 | biostudies-literature
Project description:Broadband metamaterials absorbers with high absorption, ultrathin thickness and easy configurations are in great demand for many potential applications. In this paper, we first analyse the coupling resonances in a Ti/Ge/Ti three-layer absorber, which can realise broadband absorption from 8 to 12 μm. Then we experimentally demonstrate two types of absorbers based on the Ti/Ge/Si3N4/Ti configuration. By taking advantage of coupling surface plasmon resonances and intrinsic absorption of lossy material Si3N4, the average absorptions of two types of absorbers achieve almost 95% from 8 to 14 μm (experiment result: 78% from 6.5 to 13.5 μm). In order to expand the absorption bandwidth, we further propose two Ti/Si/SiO2/Ti absorbers which can absorb 92% and 87% of ultra-broadband light in the 14-30 μm and 8-30 μm spectral range, respectively. Our findings establish general and systematic strategies for guiding the design of metamaterial absorbers with excellent broadband absorption and pave the way for enhancing the optical performance in applications of infrared thermal emitters, imaging and photodetectors.
| S-EPMC8257711 | biostudies-literature
Project description:A hybrid acoustic metamaterial is proposed as a new class of sound absorber, which exhibits superior broadband low-frequency sound absorption as well as excellent mechanical stiffness/strength. Based on the honeycomb-corrugation hybrid core (H-C hybrid core), we introduce perforations on both top facesheet and corrugation, forming perforated honeycomb-corrugation hybrid (PHCH) to gain super broadband low-frequency sound absorption. Applying the theory of micro-perforated panel (MPP), we establish a theoretical method to calculate the sound absorption coefficient of this new kind of metamaterial. Perfect sound absorption is found at just a few hundreds hertz with two-octave 0.5 absorption bandwidth. To verify this model, a finite element model is developed to calculate the absorption coefficient and analyze the viscous-thermal energy dissipation. It is found that viscous energy dissipation at perforation regions dominates the total energy consumed. This new kind of acoustic metamaterials show promising engineering applications, which can serve as multiple functional materials with extraordinary low-frequency sound absorption, excellent stiffness/strength and impact energy absorption.
| S-EPMC5327422 | biostudies-literature
Project description:High-quality broadband ultrasound transducers yield superior imaging performance in biomedical ultrasonography. However, proper design to perfectly bridge the energy between the active piezoelectric material and the target medium over the operating spectrum is still lacking. Here, we demonstrate a new anisotropic cone-structured acoustic metamaterial matching layer that acts as an inhomogeneous material with gradient acoustic impedance along the ultrasound propagation direction. When sandwiched between the piezoelectric material unit and the target medium, the acoustic metamaterial matching layer provides a broadband window to support extraordinary transmission of ultrasound over a wide frequency range. We fabricated the matching layer by etching the peeled silica optical fibre bundles with hydrofluoric acid solution. The experimental measurement of an ultrasound transducer equipped with this acoustic metamaterial matching layer shows that the corresponding -6 dB bandwidth is able to reach over 100%. This new material fully enables new high-end piezoelectric materials in the construction of high-performance ultrasound transducers and probes, leading to considerably improved resolutions in biomedical ultrasonography and compact harmonic imaging systems.
| S-EPMC5314352 | biostudies-literature