Browse
Submit Data
Databases
API
Help

Dataset Information

6 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Valorized deinking paper residue as fill material for geotechnical structures

ABSTRACT: This study introduces a novel geotechnical composite material comprising two types of fill material sourced from the paper industry—deinking paper sludge ash (DPSA) and deinking paper sludge (DPS). Five composites with different DPSA and DPS contents were investigated. Two composites were selected for further analyses. The technology and procedure for composite installation were implemented in field tests. The composites with 80% and 70% DPSA exhibited the elasticity required to withstand minor landslide slip deformations, in addition to achieving sufficiently high values of uniaxial compressive strength. The composites had a low maximum dry density value, which led to fewer settlements in the entire support structure. The enhanced shear characteristics can enable the construction of a thinner retaining wall. The delay between preparation and installation of the composites was further investigated. The field tests confirmed that the composites with 80% and 70% DPSA can be installed on the construction site 4 h and even 24 h after mixing. In 2018, a retaining wall structure with 70% DPSA and 30% DPS was successfully implemented near a railway line using conventional technology as followed-up research to the herein presented study. Results have been derived from work performed in the scope of the H2020 Paperchain project in which novel circular economy models centered on the valorization of the waste streams generated by the pulp and paper industry as secondary raw material for several resource-intensive sectors, including the construction sector, have been developed. Environmental benefits are savings in natural raw materials, reduction of landfill disposal as well as CO2 emission reduction.

SUBMITTER: Fifer Bizjak K

PROVIDER: S-EPMC8595652 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Environmental and Geotechnical Assessment of the Steel Slags as a Material for Road Structure.

Project description:Slags are the final solid wastes from the steel industry. Their production from waste and associated materials is a proper implementation of the basic objectives and principles of the waste management. This study aims to investigate the chemical and selected significant geotechnical parameters of steel slag as the alternative materials used in road construction. These investigations are strongly desired for successful application in engineering. Young's modules E, and resilient modules Mr showed that their values corresponding with requirements for subbase (principal or auxiliary) and riding surface as well. Tested mechanical properties were conducted in soaked and un-soaked (optimal moisture content) conditions. The designated high content of chromium and zinc are strongly associated with the internal crystal structure of steel slag. The results do not lead to threats when they are applied in roads' structures. Mechanical characterization was obtained by performing California bearing ratio (CBR) tests for steel slag in fixed compaction and moisture content conditions. Moreover, cyclic loading of steel slag was conducted with the application of cyclic California bearing ratio (cCBR) apparatus to characterization of this material as a controlled low-strength material. Finally, field studies that consist of static load plate VSS tests were presented.

| S-EPMC5455508 | biostudies-other

Composting material of pig manure and biogas residue

Project description:Microbial community succession during pig manure and biogas residue co-composting

| PRJNA699926 | ENA

Measures of residue density in protein structures.

Project description:A hierarchy of residue density assessments and packing properties in protein structures are contrasted, including a regular density, a variety of charge densities, a hydrophobic density, a polar density, and an aromatic density. These densities are investigated by alternative distance measures and also at the interface of multiunit structures. Amino acids are divided into nine structural categories according to three secondary structure states and three solvent accessibility levels. To take account of amino acid abundance differences across protein structures, we normalize the observed density by the expected density defining a density index. Solvent accessibility levels exert the predominant influence in determinations of the regular residue density. Explicitly, the regular density values vary approximately linearly with respect to solvent accessibility levels, the linearity parameters depending on the amino acid. The charge index reveals pronounced inequalities between lysine and arginine in their interactions with acidic residues. The aromatic density calculations in all structural categories parallel the regular density calculations, indicating that the aromatic residues are distributed as a random sample of all residues. Moreover, aromatic residues are found to be over-represented in the neighborhood of all amino acids. This result might be attributed to nucleation sites and protein stability being substantially associated with aromatic residues.

| S-EPMC22960 | biostudies-literature

MXene Nanosheets-Decorated Paper as a Green Electronics Material for Biosensing.

Project description:This research delves into the development and optimization of MXene nanosheet-based paper electrodes, emphasizing their adaptability in green electronics and diverse applications. Xuan paper, a cellulose-based material, was identified as an ideal substrate for its mechanical attributes and capacity to accommodate MXene, further yielding outstanding electrical conductivity. The MXene paper electrode demonstrated consistent performance under various conditions, showing its potential in the field of wearable electronics and medical devices. Notably, its impressive electrothermal capabilities and environmentally conscious decomposition mechanism make it a promising candidate for future green electronic applications. Overall, this study underscores the electrode's harmonization of performance and environmental sustainability, paving the way for its integration into futuristic electronic solutions.

| S-EPMC10885338 | biostudies-literature

A Parametric Study on a Paper-Based Bi-Material Cantilever Valve.

Project description:The novel paper-based Bi-Material Cantilever (B-MaC) valve allows the autonomous loading and control of multiple fluid reagents which contributes to the accurate operation of paper-based microfluidic devices utilized for biological and chemical sensing applications. In this paper, an extensive parametric study is presented to evaluate the effects of key geometric parameters of the valve, such as paper direction, cantilever width, paper type, tape type, and sample volume, in addition to the effects of relative humidity and temperature on the functionality of the B-MaC and to provide a better understanding of the rate of fluid flow and resulting deflection of the cantilever. Machine direction, cantilever width, paper type, and tape type were found to be important parameters that affect the B-MAC's activation time. It was also observed that the rate of fluid imbibition in the B-MaC is considerably affected by change in humidity for high (55 °C) and low (25 °C) temperatures, while humidity levels have no significant effect during imbibition in the B-MaC at an ambient temperature of 45 °C. It was also found that a minimum distance of 4 mm is required between the B-MaC and the stationary component to prevent accidental activation of the B-MaC prior to sample insertion when relative humidity is higher than 90% and temperature is lower than 35 °C. The rate of fluid imbibition that determines the wetted length of the B-MaC and the final deflection of the cantilever are critical in designing and fabricating point-of-care microfluidic paper-based devices. The B-MaC valve can be utilized in a fluidic circuit to sequentially load several reagents, in addition to the sample to the detection area.

| S-EPMC9506191 | biostudies-literature

Petrographic and Geotechnical Characteristics of Carbonate Aggregates from Poland and Their Correlation with the Design of Road Surface Structures.

Project description:The paper presents the basic problem related with practical application of carbonate rocks in construction: are carbonate aggregates produced from such rocks favorable for building engineering, particularly for road design and construction? To resolve this problem, (1) the geological-engineering properties of aggregates are presented, (2) the correlation between petrographic and engineering parameters is shown, and (3) a strict correlation between the geological-engineering properties and the freezing-thawing and crushing resistance is recognized. This knowledge has allowed to assess the usefulness of asphalt concrete (AC) made from dolomite and limestone aggregates in the design and construction of road surface structures. The petrography was characterized using optical microscopy and scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscope (EDS). Engineering properties were determined in accordance with European and Polish norms and guidelines. Statistical and design calculations were performed using dedicated software. The petrographic properties, and selected physical and mechanical parameters of the aggregates, were tested to show their influence on the freezing-thawing and crushing resistance. Strong functional relationships between the water adsorption, and the freezing-thawing and crushing resistance have been observed. Aggregate strength decreased after saturation with increasing concentrations of salt solutions. Calculations of AC fatigue durability and deformation allow for reducing the thickness of the road surface structure by about 20% in comparison to normative solutions. This conclusion has impact on the economy of road design and construction, and allows for a rational utilization of rock resources, which contributes to sustainable development of the construction industry.

| S-EPMC8074242 | biostudies-literature

Light-responsive paper strips as CO-releasing material with a colourimetric response.

Project description:Carbon monoxide (CO) is known for its multifaceted role in human physiology, and molecules that release CO in a controlled way have been proposed as therapeutic drugs. In this work, a light-responsive CO-releasing molecule (CORM-Dabsyl) showed a strong colourimetric response upon photochemical CO-release, owing to the tight conjugation of a Mn(i) tricarbonyl centre to a dabsyl chromophoric ligand (L). Whereas the complex was very stable in the dark in nitrogen-purged aqueous media, CO-release was effectively triggered using 405 nm irradiation. CORM-Dabsyl, L and the inactive product iCORM-Dabsyl have been investigated by DFT and TD-DFT calculations. Only mild toxicity of CORM-Dabsyl was observed against LX-2 and HepaRG® human cell lines (IC50 ? 30 ?M). Finally, to develop a CO storage and release material that is readily applicable to therapeutic situations, CORM-Dabsyl was loaded on low-cost and easily disposable paper strips, from which the light triggered CO-release was conveniently visible with the naked eye.

| S-EPMC5627354 | biostudies-literature

Lower Thermospheric Material Transport via Lagrangian Coherent Structures.

Project description:We show that inter-model variation due to under-constraint by observations impacts the ability to predict material transport in the lower thermosphere. Lagrangian coherent structures (LCSs), indicating regions of maximal separation (or convergence) in a time-varying flow, are derived in the lower thermosphere from models for several space shuttle water vapor plume events. We find that inter-model differences in thermospheric transport manifest in LCSs in a way that is more stringent than mean wind analyses. LCSs defined using horizontal flow fields from the Specified Dynamics version of the Whole Atmosphere Community Climate Model with thermosphere-ionosphere eXtension (SD-WACCMX) at 109 km altitude are compared to Global Ultraviolet Imager (GUVI) observations of the space shuttle main engine plume. In one case, SD-WACCMX predicts an LCS ridge to produce spreading not found in the observations. LCSs and tracer transport from SD-WACCMX and from data assimilative WACCMX (WACCMX + DART) are compared to each other and to GUVI observations. Differences in the modeled LCSs and tracer positions appear between SD-WACCMX and WACCMX + DART despite the similarity of mean winds. WACCMX + DART produces better tracer transport results for a July 2006 event, but it is unclear which model performs better in terms of LCS ridges. For a February 2010 event, when mean winds differ by up to 50 m/s between the models, differences in LCSs and tracer trajectories are even more severe. Low-pass filtering the winds up to zonal wavenumber 6 reduces but does not eliminate inter-model LCS differences. Inter-model alignment of LCSs improves at a lower 60 km altitude.

| S-EPMC9286062 | biostudies-literature

Soy LGI Protein NILs, seed fill

Project description:Evaluation of transcripts from soybean seed tissue during seed fill for a pair of near-isogenic lines contrasting in seed protein and oil and carrying an introgression at the linkage group I protein QTL region. ****[PLEXdb(http://www.plexdb.org) has submitted this series at GEO on behalf of the original contributor, Yung-Tsi Bolon. The equivalent experiment is GM11 at PLEXdb.]

2011-11-22 | GSE33408 | GEO

Development of a new cucumber reference material for pesticide residue analysis: feasibility study for material processing, homogeneity and stability assessment.

Project description:The feasibility of the production of a reference material for pesticide residue analysis in a cucumber matrix was investigated. Cucumber was spiked at 0.075 mg/kg with each of the 15 selected pesticides (acetamiprid, azoxystrobin, carbendazim, chlorpyrifos, cypermethrin, diazinon, (α + β)-endosulfan, fenitrothion, imazalil, imidacloprid, iprodione, malathion, methomyl, tebuconazole and thiabendazole) respectively. Three different strategies were considered for processing the material, based on the physicochemical properties of the vegetable and the target pesticides. As a result, a frozen spiked slurry of fresh cucumber, a spiked freeze-dried cucumber powder and a freeze-dried cucumber powder spiked by spraying the powder were studied. The effects of processing and aspects related to the reconstitution of the material were evaluated by monitoring the pesticide levels in the three materials. Two separate analytical methods based on LC-MS/MS and GC-MS/MS were developed and validated in-house. The spiked freeze-dried cucumber powder was selected as the most feasible material and more exhaustive studies on homogeneity and stability of the pesticide residues in the matrix were carried out. The results suggested that the between-unit homogeneity was satisfactory with a sample intake of dried material as low as 0.1 g. A 9-week isochronous stability study was undertaken at -20 °C, 4 °C and 18 °C, with -70 °C designated as the reference temperature. The pesticides tested exhibited adequate stability at -20 °C during the 9-week period as well as at -70 °C for a period of 18 months. These results constitute a good basis for the development of a new candidate reference material for selected pesticides in a cucumber matrix.

| S-EPMC4383829 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data