Dataset Information

An Efficient Symmetric Electrolyzer Based On Bifunctional Perovskite Catalyst for Ammonia Electrolysis.

ABSTRACT: Ammonia is a natural pollutant in wastewater and removal technique such as ammonia electro-oxidation is of paramount importance. The development of highly efficient and low-costing electrocatalysts for the ammonia oxidation reaction (AOR) and hydrogen evolution reaction (HER) associated with ammonia removal is subsequently crucial. In this study, for the first time, the authors demonstrate that a perovskite oxide LaNi_0.5 Cu_0.5 O_3-δ after being annealed in Ar (LNCO55-Ar), is an excellent non-noble bifunctional catalyst towards both AOR and HER, making it suitable as a symmetric ammonia electrolyser (SAE) in alkaline medium. In contrast, the LNCO55 sample fired in air (LNCO55-Air) is inactive towards AOR and shows very poor HER activity. Through combined experimental results and theoretical calculations, it is found that the superior AOR and HER activities are attributed to the increased active sites, the introduction of oxygen vacancies, the synergistic effect of B-site cations and the different active sites in LNCO55-Ar. At 1.23 V, the assembled SAE demonstrates ≈100% removal efficiency in 2210 ppm ammonia solution and >70% in real landfill leachate. This work opens the door for developments towards bifunctional catalysts, and also takes a profound step towards the development of low-costing and simple device configuration for ammonia electrolysers.

SUBMITTER: Zhang M

PROVIDER: S-EPMC8596127 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:Ammonia is an important feedstock for producing fertiliser and is also a potential energy carrier. However, the process currently used for ammonia synthesis, the Haber-Bosch process, consumes a huge amount of energy; therefore the development of new catalysts for synthesising ammonia at a high rate under mild conditions (low temperature and low pressure) is necessary. Here, we show that Ru/La0.5Ce0.5O1.75 pre-reduced at an unusually high temperature (650 °C) catalysed ammonia synthesis at extremely high rates under mild conditions; specifically, at a reaction temperature of 350 °C, the rates were 13.4, 31.3, and 44.4 mmol g-1 h-1 at 0.1, 1.0, and 3.0 MPa, respectively. Kinetic analysis revealed that this catalyst is free of hydrogen poisoning under the conditions tested. Electron energy loss spectroscopy combined with O2 absorption capacity measurements revealed that the reduced catalyst consisted of fine Ru particles (mean diameter < 2.0 nm) that were partially covered with partially reduced La0.5Ce0.5O1.75 and were dispersed on a thermostable support. Furthermore, Fourier transform infrared spectra measured after N2 addition to the catalyst revealed that N2 adsorption on Ru atoms that interacted directly with the reduced La0.5Ce0.5O1.75 weakened the N 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 1111111111111111111111111111111111 1111111111111111111111111111111111 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 1111111111111111111111111111111111 1111111111111111111111111111111111 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 1111111111111111111111111111111111 1111111111111111111111111111111111 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 N bond and thus promoted its cleavage, which is the rate-determining step for ammonia synthesis. Our results indicate that high-temperature pre-reduction of this catalyst, which consists of Ru supported on a thermostable composite oxide with a cubic fluorite structure and containing reducible cerium, resulted in the formation of many sites that were highly active for N2 reduction by hydrogen.

Dataset Information

An Efficient Symmetric Electrolyzer Based On Bifunctional Perovskite Catalyst for Ammonia Electrolysis.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets