Browse
Submit Data
Databases
API
Help

Dataset Information

22 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Tunable Proton Conductivity and Color in a Nonporous Coordination Polymer via Lattice Accommodation to Small Molecules.

ABSTRACT: Nonporous coordination polymers (npCPs) able to accommodate molecules through internal lattice reorganization are uncommon materials with applications in sensing and selective gas adsorption. Proton conduction, extensively studied in the analogue metal-organic frameworks under high-humidity conditions, is however largely unexplored in spite of the opportunities provided by the particular sensitivity of npCPs to lattice perturbations. Here, AC admittance spectroscopy is used to unveil the mechanism behind charge transport in the nonporous 1·2CH₃ CN. The conductance in the crystals is found to be of protonic origin. A vehicle mechanism is triggered by the dynamics of the weakly coupled acetonitrile molecules in the lattice that can be maintained by a combination of thermal cycles, even at low humidity levels. An analogue 1·pyrrole npCP is formed by in situ exchange of these weakly bound acetonitrile molecules by pyrrole. The color and conduction properties are determined by the molecules weakly bonded in the lattice. This is the first example of acetonitrile-mediated proton transport in an npCP showing distinct optical response to different molecules. These findings open the door to the design of switchable protonic conductors and capacitive sensors working at low humidity levels and with selectivity to different molecules.

SUBMITTER: Develioglu A

PROVIDER: S-EPMC8596141 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Enhanced proton conductivity in a layered coordination polymer.

Project description:[Gd(H4nmp)(H2O)2]Cl·2H2O (1) converts into [Gd2(H3nmp)2]·xH2O (2) (x = 1 to 4) with a notable increase in proton conductivity. 1 is a charged layered material counter balanced by chloride ions, with proton conductivity values of 1.23 × 10-5 S cm-1 at 98% relative humidity (RH) and 40 °C. At 98% RH and 94 °C the observed conductivity is 0.51 S cm-1, being to date one of the highest values ever reported for a proton-conducting coordination polymer. This increase is observed during a structural transformation into 2 that occurs at high temperature and RH. While this remarkable conductivity is observed only after transformation and by maintaining high humidity conditions, as-synthesized 2 also shows a conductivity value of 3.79 × 10-2 S cm-1 at 94 °C and 98% RH, still ranked as one of the highest reported values. Moreover, it is shown that the key factor for high proton conduction is the unusual dynamic structural transformation with water insertion and release of chloride ions.

| S-EPMC7448532 | biostudies-literature

Coordination polymer glass from a protic ionic liquid: proton conductivity and mechanical properties as an electrolyte.

Project description:High proton conducting electrolytes with mechanical moldability are a key material for energy devices. We propose an approach for creating a coordination polymer (CP) glass from a protic ionic liquid for a solid-state anhydrous proton conductor. A protic ionic liquid (dema)(H2PO4), with components which also act as bridging ligands, was applied to construct a CP glass (dema)0.35[Zn(H2PO4)2.35(H3PO4)0.65]. The structural analysis revealed that large Zn-H2PO4 -/H3PO4 coordination networks formed in the CP glass. The network formation results in enhancement of the properties of proton conductivity and viscoelasticity. High anhydrous proton conductivity (σ = 13.3 mS cm-1 at 120 °C) and a high transport number of the proton (0.94) were achieved by the coordination networks. A fuel cell with this CP glass membrane exhibits a high open-circuit voltage and power density (0.15 W cm-2) under dry conditions at 120 °C due to the conducting properties and mechanical properties of the CP glass.

| S-EPMC8159284 | biostudies-literature

Proton-conductive coordination polymer glass for solid-state anhydrous proton batteries.

Project description:Designing solid-state electrolytes for proton batteries at moderate temperatures is challenging as most solid-state proton conductors suffer from poor moldability and thermal stability. Crystal-glass transformation of coordination polymers (CPs) and metal-organic frameworks (MOFs) via melt-quenching offers diverse accessibility to unique properties as well as processing abilities. Here, we synthesized a glassy-state CP, [Zn3(H2PO4)6(H2O)3](1,2,3-benzotriazole), that exhibited a low melting temperature (114 °C) and a high anhydrous single-ion proton conductivity (8.0 × 10-3 S cm-1 at 120 °C). Converting crystalline CPs to their glassy-state counterparts via melt-quenching not only initiated an isotropic disordered domain that enhanced H+ dynamics, but also generated an immersive interface that was beneficial for solid electrolyte applications. Finally, we demonstrated the first example of a rechargeable all-solid-state H+ battery utilizing the new glassy-state CP, which exhibited a wide operating-temperature range of 25 to 110 °C.

| S-EPMC8179665 | biostudies-literature

Reduction of the Lattice Thermal Conductivity of Polymer Semiconductors by Molecular Doping.

Project description:Here we show that molecular doping of polymer thermoelectrics increases the electrical conductivity while reducing the thermal conductivity. A high-throughput methodology based on annealing and doping gradients within individual films is employed to self-consistently analyze and correlate electrical and thermal characteristics for the equivalent of >100 samples. We focus on the benchmark material system poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT) doped with molecular acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). The thermal conductivity of neat PBTTT films is dominated by the degree of crystallinity, with thermal percolation observed for annealing temperatures >170 °C. Upon doping the samples with a relatively low amount of F4TCNQ (anion content <1 mol %), the thermal conductivity exhibits a two-fold reduction without compromising the crystalline quality, which resembles the effect of alloy scattering observed in several inorganic systems. The analysis of the relation between thermal and electrical conductivities shows that thermal transport is dominated by a doping-induced reduced lattice contribution.

| S-EPMC7497712 | biostudies-literature

Hybrid Color-Tunable Polymer Light-Emitting Diodes Using Electrospraying.

Project description:This paper proposes a new paradigm in polymer light-emitting diode (PLED) fabrication by using a uniform electrosprayed microparticle film as the active layer. Among the seven electrospraying parameters analyzed, three crucial parameters are statistically identified and optimized to obtain thin electrosprayed microparticle layers. Using optimized electrospraying conditions, single-color red-emitting PLED (MEH-PPV) with a peak current density of 16.1 mA/mm2 under a 13.5 V bias and a peak external quantum efficiency of 3.2% are successfully fabricated. Finally, a combinatorial approach is implemented using both MEH-PPV (red-emitting) and F8BT (green-emitting) polymer microparticles at different mixing ratios to tune the emission spectrum of the devices. As such, it has been demonstrated that hybrid multilayer films using different organic materials with nonorthogonal solvents can be produced using this new approach. The parameter analysis and color-tunable properties pave the way towards white light PLED fabrication.

| S-EPMC6868885 | biostudies-literature

Large breathing effect induced by water sorption in a remarkably stable nonporous cyanide-bridged coordination polymer.

Project description:While metal-organic frameworks (MOFs) are at the forefront of cutting-edge porous materials, extraordinary sorption properties can also be observed in Prussian Blue Analogs (PBAs) and related materials comprising extremely short bridging ligands. Herein, we present a bimetallic nonporous cyanide-bridged coordination polymer (CP) {[Mn(imH)]2[Mo(CN)8]} n (1Mn; imH = imidazole) that can efficiently and reversibly capture and release water molecules over tens of cycles without any fatigue despite being based on one of the shortest bridging ligands known - the cyanide. The sorption performance of {[Mn(imH)]2[Mo(CN)8]} n matches or even outperforms MOFs that are typically selected for water harvesting applications with perfect sorption reversibility and very low desorption temperatures. Water sorption in 1Mn is possible due to the breathing effect (accompanied by a dramatic cyanide-framework transformation) occurring in three well-defined steps between four different crystal phases studied structurally by X-ray diffraction structural analysis. Moreover, the capture of H2O by 1Mn switches the EPR signal intensity of the MnII centres, which has been demonstrated by in situ EPR measurements and enables monitoring of the hydration level of 1Mn by EPR. The sorption of water in 1Mn controls also its photomagnetic behavior at the cryogenic regime, thanks to the presence of the [MoIV(CN)8]4- photomagnetic chromophore in the structure. These observations demonstrate the extraordinary sorption potential of cyanide-bridged CPs and the possibility to merge it with the unique physical properties of this class of compounds arising from their bimetallic character (e.g. photomagnetism and long-range magnetic ordering).

| S-EPMC8261731 | biostudies-literature

Fully Organic Bulk Polymer with Metallic Thermal Conductivity and Tunable Thermal Pathways.

Project description:Electrically insulating polymers are indispensable for electronic and energy applications, but their poor thermal conduction has increasingly become a bottleneck for high-performance devices. Highly drawn low-dimensional polymeric fibers and thin films can exhibit metallic conductivity. Extending this to bulk materials required by real world applications is prohibitive due to the additional interfacial thermal conduction barriers. It is demonstrated that highly aligned ultrahigh molecular weight polyethylene microfibers can be incorporated into a silicone matrix to yield a fully organic bulk polymer composite with a continuous vertical phonon pathway. This leads to a perpendicular thermal conductivity of 38.27 W m-1 K-1 , at par with metals and two orders of magnitude higher than other bulk organic polymers. Taking further advantage of the mechanical flexibility of the microfibers, the processing method offers the freedom to tailor heat transfer pathways in a macroscopic 3D space. The material/process opens up opportunities for efficient thermal management in high-performance devices.

| S-EPMC8292902 | biostudies-literature

Color tunable pressure sensors based on polymer nanostructured membranes for optofluidic applications.

Project description:We demonstrate an integrated optical pressure sensing platform for multiplexed optofluidics applications. The sensing platform consists in an array of elastomeric on-side nanostructured membranes -effectively 2D photonic crystal- which present colour shifts in response to mechanical stress that alter their nanostructure characteristical dimensions, pitch or orientation. The photonic membranes are prepared by a simple and cost-effective method based on the infiltration of a 2D colloidal photonic crystal (CPC) with PDMS and their integration with a microfluidic system. We explore the changes in the white light diffraction produced by the nanostructured membranes when varying the pneumatic pressure in the microfluidics channels as a way to achieve a power-free array of pressure sensors that change their reflective colour depending on the bending produced on each sensor. The structural characterization of these membranes was performed by SEM, while the optical properties and the pressure-colour relation were evaluated via UV-Vis reflection spectrometry. Maximum sensitivities of 0.17 kPa-1 is obtained when measuring at Littrow configuration (θin = -θout), and close to the border of the membranes. The reflected colour change with pressure is as well monitorized by using a smartphone camera.

| S-EPMC6397196 | biostudies-literature

Color-Tunable Room-Temperature Phosphorescence from Non-Aromatic-Polymer-Involved Charge Transfer.

Project description:Polymeric room-temperature phosphorescence (RTP) materials especially multicolor RTP systems hold great promise in concrete applications. A key feature in these applications is a triplet charge transfer transition. Aromatic electron donors and electron acceptors are often essential to ensure persistent RTP. There is much interest in fabricating non-aromatic charge-transfer-mediated RTP materials and it still remains a formidable challenge to achieve color-tunable RTP via charge transfer. Herein, a charge-transfer-mediated RTP material by embedding quinoline derivatives within a non-aromatic polymer matrix such as polyacrylamide (PAM) or polyvinyl alcohol (PVA) is developed. Through-space charge transfer (TSCT) is achieved upon alkali- or heat treatment to realize a long phosphorescence lifetime of up to 629.90 ms, high phosphorescence quantum yield of up to 20.51%, and a green-to-blue afterglow for more than 20 s at room temperature. This color-tunable RTP emerges from a nonaromatic polymer to single phosphor charge transfer that has rarely been reported before. This finding suggests that an effective and simple approach can deliver new color-tunable RTP materials for applications including multicolor display, information encryption, and gas detection.

| S-EPMC11321690 | biostudies-literature

Ligand assisted swelling-deswelling microencapsulation (LASDM) for stable, color tunable perovskite-polymer composites.

Project description:Metal halide perovskite nanocrystals (PNCs), with excellent electronic and optical properties, are promising for a variety of optoelectronic and photonic applications. However, the instability issue still impedes their practical applications. Here a ligand-assisted swelling-deswelling microencapsulation (LASDM) strategy is proposed and evaluated for improving the stability and photoluminescence (PL) performance of PNCs. With ligand assistance, well dispersed and intimately passivated PNCs in polymer matrices are obtained. Compared with the previously reported swelling-deswelling microencapsulation (SDM) strategy, the proposed method can provide better nanocrystal size control and surface coordination. Thus, full-color perovskite-polymer composites (PPCs) with unprecedented environmental stability can be achieved and concentration quenching can be avoided in polymer matrices. The excellent color purity, color tunability, optical density variability and environmental stability make PPCs highly promising for a range of PL applications, such as tailored lighting and transparent projection displays. Moreover, the simple, low cost, scalable process and the compatibility of this method with a group of polymer matrices should pave the way for PPCs to meet the requirements for practical use.

| S-EPMC9417300 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data