Browse
Submit Data
Databases
API
Help

Dataset Information

27 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Mesoporous WC_x Films with NiO-Protected Surface: Highly Active Electrocatalysts for the Alkaline Oxygen Evolution Reaction.

ABSTRACT: Metal carbides are promising materials for electrocatalytic reactions such as water electrolysis. However, for application in catalysis for the oxygen evolution reaction (OER), protection against oxidative corrosion, a high surface area with facile electrolyte access, and control over the exposed active surface sites are highly desirable. This study concerns a new method for the synthesis of porous tungsten carbide films with template-controlled porosity that are surface-modified with thin layers of nickel oxide (NiO) to obtain active and stable OER catalysts. The method relies on the synthesis of soft-templated mesoporous tungsten oxide (mp. WO_x ) films, a pseudomorphic transformation into mesoporous tungsten carbide (mp. WC_x ), and a subsequent shape-conformal deposition of finely dispersed NiO species by atomic layer deposition (ALD). As theoretically predicted by density functional theory (DFT) calculations, the highly conductive carbide support promotes the conversion of Ni²⁺ into Ni³⁺ , leading to remarkably improved utilization of OER-active sites in alkaline medium. The obtained Ni mass-specific activity is about 280 times that of mesoporous NiO_x (mp. NiO_x ) films. The NiO-coated WC_x catalyst achieves an outstanding mass-specific activity of 1989 A g_Ni ^-1 in a rotating-disc electrode (RDE) setup at 25 °C using 0.1 m KOH as the electrolyte.

SUBMITTER: Frisch M

PROVIDER: S-EPMC8596595 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Phytochemical-assisted green synthesis of CuFeOx nano-rose electrocatalysts for oxygen evolution reaction in alkaline media.

Project description:This study represents a green synthesis method for fabricating an oxygen evolution reaction (OER) electrode by depositing two-dimensional CuFeOx on nickel foam (NF). Two-dimensional CuFeOx was deposited on NF using in situ hydrothermal synthesis in the presence of Aloe vera extract. This phytochemical-assisted synthesis of CuFeOx resulted in a unique nano-rose-like morphology (petal diameter 30-70 nm), which significantly improved the electrochemical surface area of the electrode. The synthesized electrode was analyzed for its OER electrocatalytic activity and it was observed that using 75% Aloe vera extract in the phytochemical-assisted synthesis of CuFeOx resulted in improved OER electrocatalytic performance by attaining an overpotential of 310 mV for 50 mA cm-2 and 410 mV for 100 mA cm-2. The electrode also sustained robust stability throughout the 50 h of chronopotentiometry studies under alkaline electrolyte conditions, demonstrating its potential as an efficient OER electrode material. This study highlights the promising use of Aloe vera extract as a green and cost-effective way to synthesize efficient OER electrode materials.

| S-EPMC10288342 | biostudies-literature

Perovskite-based electrocatalysts for oxygen evolution reaction in alkaline media: A mini review.

Project description:Water electrolysis is one of the attractive technologies for producing clean and sustainable hydrogen fuels with high purity. Among the various kinds of water electrolysis systems, anion exchange membrane water electrolysis has received much attention by combining the advantages of alkaline water electrolysis and proton exchange membrane water electrolysis. However, the sluggish kinetics of the oxygen evolution reaction, which is based on multiple and complex reaction mechanisms, is regarded as a major obstacle for the development of high-efficiency water electrolysis. Therefore, the development of high-performance oxygen evolution reaction electrocatalysts is a prerequisite for the commercialization and wide application of water electrolysis systems. This mini review highlights the current progress of representative oxygen evolution reaction electrocatalysts that are based on a perovskite structure in alkaline media. We first summarize the research status of various kinds of perovskite-based oxygen evolution reaction electrocatalysts, reaction mechanisms and activity descriptors. Finally, the challenges facing the development of perovskite-based oxygen evolution reaction electrocatalysts and a perspective on their future are discussed.

| S-EPMC9585187 | biostudies-literature

Highly active electrocatalysts of iron phthalocyanine by MOFs for oxygen reduction reaction under alkaline solution.

Project description:Metal-nitrogen-carbon materials (Fe-N/C) have been extensively studied as one of the most excellent electrocatalysts with good catalytic activities and cheap price towards the oxygen reduction reaction (ORR). The rational design of metal-organic framework (MOF) derived carbon materials with rapid mass transport ability and good stability is a great challenge to achieve. Herein, intensive research of Fe-N/C catalysts prepared from assembling MOFs with cheap iron phthalocyanine (FePc) for the ORR is innovatively carried out. A series of Fe-N/C nano-architectures are simply synthesized by a convenient assembling method under different temperatures (800 to 1000 °C). The assembly method at high temperatures tunes the number of FeN x active sites and intensifies the exposure of interior active sites. The highly dispersing Fe20-N/C electrocatalyst treated at 900 °C exhibits remarkable stability and excellent ORR activities with a half-wave potential of 0.866 V (vs. RHE) in alkaline solution, which is higher than that of commercial Pt/C (0.838 V vs. RHE) under the same test conditions. X-ray photoelectron spectroscopy results illustrate that incorporated MOFs interact with the active centre of FePc, tend to enhance the electron transition and to promote the kinetics of the ORR. Overall, highly dispersed Fe-N/C MOF-based materials are excellent non-precious metal electrocatalysts for energy and environmental applications.

| S-EPMC9055539 | biostudies-literature

Understanding the Role of Surface States on Mesoporous NiO Films.

Project description:Surface states of mesoporous NiO semiconductor films have particular properties differing from the bulk and are able to dramatically influence the interfacial electron transfer and adsorption of chemical species. To achieve a better performance of NiO-based p-type dye-sensitized solar cells (p-DSCs), the function of the surface states has to be understood. In this paper, we applied a modified atomic layer deposition procedure that is able to passivate 72% of the surface states on NiO by depositing a monolayer of Al2O3. This provides us with representative control samples to study the functions of the surface states on NiO films. A main conclusion is that surface states, rather than the bulk, are mainly responsible for the conductivity in mesoporous NiO films. Furthermore, surface states significantly affect dye regeneration (with I-/I3- as redox couple) and hole transport in NiO-based p-DSCs. A new dye regeneration mechanism is proposed in which electrons are transferred from reduced dye molecules to intra-bandgap states, and then to I3- species. The intra-bandgap states here act as catalysts to assist I3- reduction. A more complete mechanism is suggested to understand the particular hole transport behavior in p-DSCs, in which the hole transport time is independent of light intensity. This is ascribed to the percolation hole hopping on the surface states. When the concentration of surface states was significantly reduced, the light-independent charge transport behavior in pristine NiO-based p-DSCs transformed into having an exponential dependence on light intensity, similar to that observed in TiO2-based n-type DSCs. These conclusions on the function of surface states provide new insight into the electronic properties of mesoporous NiO films.

| S-EPMC7596758 | biostudies-literature

Tryptophan-Stabilized Au-FexOy Nanocomposites as Electrocatalysts for Oxygen Evolution Reaction.

Project description:Au-FexOy nanocomposites with a variable gold-to-iron ratio were stabilized with l-tryptophan. The synthetic methodology is based on the facile redox reaction between Au(III) and Fe(0) in the presence of gold nanoparticle as a seed at room temperature in an aqueous medium. The synthesis results in the deposition of Au nanoparticles on the surface of iron oxide layers. Composition variation in the nanocomposites was obtained by controlling the seed amount and reducing agent. These nanocomposites are used as electrocatalysts for the thermodynamically unfavorable oxygen evolution reaction (OER) from water. Among the nanocomposites, the most efficient OER activity was observed from the nanocomposite 12. The content of iron with respect to gold is at the maximum in the nanocomposite, which was obtained from the reaction with a minimum seed concentration and maximum reducing agent.

| S-EPMC6647969 | biostudies-literature

Composite Ni/NiO-Cr2O3 Catalyst for Alkaline Hydrogen Evolution Reaction.

Project description:We report a Ni-Cr/C electrocatalyst with unprecedented mass-activity for the hydrogen evolution reaction (HER) in alkaline electrolyte. The HER kinetics of numerous binary and ternary Ni-alloys and composite Ni/metal-oxide/C samples were evaluated in aqueous 0.1 M KOH electrolyte. The highest HER mass-activity was observed for Ni-Cr materials which exhibit metallic Ni as well as NiO x and Cr2O3 phases as determined by X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) analysis. The onset of the HER is significantly improved compared to numerous binary and ternary Ni-alloys, including Ni-Mo materials. It is likely that at adjacent Ni/NiO x sites, the oxide acts as a sink for OHads, while the metallic Ni acts as a sink for the Hads intermediate of the HER, thus minimizing the high activation energy of hydrogen evolution via water reduction. This is confirmed by in situ XAS studies that show that the synergistic HER enhancement is due to NiO x content and that the Cr2O3 appears to stabilize the composite NiO x component under HER conditions (where NiO x would typically be reduced to metallic Ni0). Furthermore, in contrast to Pt, the Ni(O x )/Cr2O3 catalyst appears resistant to poisoning by the anion exchange ionomer (AEI), a serious consideration when applied to an anionic polymer electrolyte interface. Furthermore, we report a detailed model of the double layer interface which helps explain the observed ensemble effect in the presence of AEI.

| S-EPMC4501498 | biostudies-literature

Nickel foam and stainless steel mesh as electrocatalysts for hydrogen evolution reaction, oxygen evolution reaction and overall water splitting in alkaline media.

Project description:In this work, several commonly used conductive substrates as electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) under alkaline conditions were studied, including nickel foam (Ni foam), copper foam (Cu foam), nickel mesh (Ni mesh) and stainless steel mesh (SS mesh). Ni foam and SS mesh are demonstrated as high-performance and stable electrocatalysts for HER and OER, respectively. For HER, Ni foam exhibited an overpotential of 0.217 V at a current density of 10 mA cm-2 with a Tafel slope of 130 mV dec-1, which were larger than that of the commercial Pt/C catalyst, but smaller than that of the other conductive substrates. Meanwhile, the SS mesh showed the best electrocatalytic performance for OER with an overpotential of 0.277 V at a current density of 10 mA cm-2 and a Tafel slope of 51 mV dec-1. Its electrocatalytic performance not only exceeded those of the other conductive substrates but also the commercial RuO2 catalyst. Moreover, both Ni foam and SS mesh exhibited high stability during HER and OER, respectively. Furthermore, in the two-electrode system with Ni foam used as the cathode and SS mesh used as the anode, they enable a current density of 10 mA cm-2 at a small cell voltage of 1.74 V. This value is comparable to or exceeding the values of previously reported electrocatalysts for overall water splitting. In addition, NiO on the surface of Ni foam may be the real active species for HER, NiO and FeO x on the surface of SS mesh may be the active species for OER. The abundant and commercial availability, long-term stability and low-cost property of nickel foam and stainless steel mesh enable their large-scale practical application in water splitting.

| S-EPMC9072957 | biostudies-literature

Nanosheets of NiCo2O4/NiO as Efficient and Stable Electrocatalyst for Oxygen Evolution Reaction.

Project description:Development of a stable catalyst that can efficiently function for longer time for energy conversion process in water splitting is a challenging work. Here, NiCo2O4/NiO nanosheets are successfully synthesized following a simple wet-chemical route, followed by the combustion technique. Finally, the synthesized catalyst NiCo2O4/NiO can function as an efficient catalyst for oxygen evolution reaction. Nanosheets with interconnections are very useful for better electron transportation because the pores in between the sheets are useful for the diffusion of electrolyte in electrocatalysis. In oxygen evolution reaction, these sheets can generate current densities of 10 and 20 mA/cm2, respectively, upon application of 1.59 and 1.62 V potential versus reversible hydrogen electrode (RHE) under alkaline condition. In contrast, bare NiCo2O4 nanowire bundles can generate a current density of 10 mA/cm2 upon application of 1.66 V versus RHE. The presence of NiO in NiCo2O4/NiO nanosheets helps to increase the conductivity, which further increases the electrocatalytic activity of NiCo2O4/NiO nanosheets.

| S-EPMC6645138 | biostudies-literature

Carbon-Supported High-Loading Sub-4 nm PtCo Alloy Electrocatalysts for Superior Oxygen Reduction Reaction.

Project description:Increasing the loading density of nanoparticles on carbon support is essential for making Pt-alloy/C catalysts practical in H2-air fuel cells. The challenge lies in increasing the loading while suppressing the sintering of Pt-alloy nanoparticles. This work presents a 40% Pt-weighted sub-4 nm PtCo/C alloy catalyst via a simple incipient wetness impregnation method. By carefully optimizing the synthetic conditions such as Pt/Co ratios, calcination temperature, and time, the size of supported PtCo alloy nanoparticles is successfully controlled below 4 nm, and a high electrochemical surface area of 93.8 m2/g is achieved, which is 3.4 times that of commercial PtCo/C-TKK catalysts. Demonstrated by electrochemical oxygen reduction reactions, PtCo/C alloy catalysts present an enhanced mass activity of 0.465 A/mg at 0.9 V vs. RHE, which is 2.0 times that of the PtCo/C-TKK catalyst. Therefore, the developed PtCo/C alloy catalyst has the potential to be a highly practical catalyst for H2-air fuel cells.

| S-EPMC10458021 | biostudies-literature

Self-terminating electrodeposition of Pt on WC electrocatalysts.

Project description:Self-terminated electrochemical deposition is used to grow Pt nanoparticles on tungsten monocarbide (WC) from a pH 4 electrolyte of 3 mmol/L K2PtCl4-0.5 mol/L NaCl. An unconventional potentiodynamic deposition program is used where nucleation is promoted at large overpotentials followed by growth termination at still larger overpotentials to yield a high coverage of Pt nanoparticles. Following three deposition cycles between -0.8 VSCE and -0.45 VSCE, the surface is covered by a monolayer equivalent charge of Pt in the form of ≈3 × 1011 particles/cm2 that are ≈6.7 ± 1.1 nm in diameter. The number and size of nanoparticles increase monotonically for five deposition cycles. Area-normalized kinetics for hydrogen evolution (HER) and oxidation (HOR) on Pt-WC were determined in 0.5 mol/L H2SO4. For the lowest surface coverage of Pt nanoparticles on WC, ≈ 0.01, an exchange current density of ≈ 100 mA/cm2 is achieved, comparable to the highest reported values for Pt nanoparticles and ultramicroelectrodes. The area normalized apparent exchange current density decreases with increasing Pt coverage as the relative contribution of point versus planar diffusion decreases. Self-terminated electrodeposition of Pt provides an attractive approach to achieving ultra-low loadings of well-dispersed Pt nanoparticles on a non-precious metal support like WC.

| S-EPMC7724966 | biostudies-literature