Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Thermally Activated Delayed Fluorescence and Phosphorescence Quenching in Iminophosphonamide Copper and Zinc Complexes.

ABSTRACT: The synthesis of copper and zinc complexes of four variably substituted iminophosphonamide ligands is presented. While the copper complexes form ligand-bridged dimers, the zinc compounds are monomeric. Due to different steric demand of the ligand the arrangement of the ligands within the dimeric complexes varies. Similar to the structurally related iminophosphonamide complexes of alkali metals and calcium, the steady-state and time-resolved photoluminescence (PL) of four of the seven compounds studied here as solids in a temperature range of 5-295 K can be described within the scheme of thermally activated delayed fluorescence (TADF). Accordingly, they exhibit bright blue-green phosphorescence at low temperatures (<100 K), which turns into delayed fluorescence by increasing the temperature. However, unusually, the fluorescence is practically absent in two copper complexes which otherwise still conform to the TADF scheme. In these cases, the excited singlet states decay essentially non-radiatively and their thermal population from the corresponding low-lying triplet states efficiently quenches PL (phosphorescence). Three other copper and zinc complexes only exhibit prompt fluorescence, evidencing a wide variation of photophysical properties in this class of compounds. The excited states of the copper complex with especially pronounced phosphorescence quenching were also investigated by low-temperature time-resolved infrared spectroscopy and quantum chemical calculations.

SUBMITTER: Goswami B

PROVIDER: S-EPMC8596734 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

QM/MM studies on luminescence mechanism of dinuclear copper iodide complexes with thermally activated delayed fluorescence.

Project description:The QM/MM method is employed to investigate the photophysical mechanism of two dinuclear copper iodide complexes with thermally activated delayed fluorescence (TADF). The S1-T1 energy differences (ΔE ST) in these two complexes are small enough so that repopulating the S1 state from T1 becomes energetically allowed. Both forward and reverse intersystem crossing (ISC and rISC) processes are much faster than the corresponding radiative fluorescence and phosphorescence processes [k ISC (108 s-1) > k F r (106 s-1), k rISC (105 s-1) > k P r (103 s-1)]. The faster rISC process than the phosphorescence emission enables TADF. Moreover, the diphosphine ligands are found to play an important role in regulating the electronic structures and thereto the radiative and nonradiative rate constants. The present work rationalizes experimental phenomena and helps understand the intrinsic luminescence properties. The obtained insights could be useful for tuning the luminescence performance of dicopper-based luminescence materials.

| S-EPMC9065726 | biostudies-literature

Thermally Activated Delayed Fluorescence in Neutral and Cationic Copper(I) Complexes with the 2-(4-Thiazolyl)benzimidazole Ligand.

Project description:Cationic [Cu(P^P)(Htbz)]PF6 [P^P = xantphos, dpephos; Htbz = 2-(4-thiazolyl)benzimidazole] and the corresponding neutral complexes [Cu(P^P)(tbz)], obtained through deprotonation of the diimine ligand, have been synthesized with the aim of analyzing the role of the diphosphane and Htbz deprotonation in the emissive properties of these complexes. For the study of the diphosphane effect, the luminescence properties of these compounds have been compared with those of the reported analogous derivatives with Htbz and carborane diphosphanes. Complexes [Cu(P^P)(Htbz)]PF6 (P^P = xantphos, dpephos) and [Cu(dpephos)(tbz)] display thermally activated delayed fluorescence, which has been studied, revealing a ΔE(S1-T1) between 658 and 455 cm-1. Theoretical calculations indicate different origins for the absorptions, leading to the observed emissions.

| S-EPMC10324396 | biostudies-literature

Solution-Processed OLEDs Based on Thermally Activated Delayed Fluorescence Copper(I) Complexes with Intraligand Charge-Transfer Excited State.

Project description:A new series of tetrahedral heteroleptic copper(I) complexes exhibiting efficient thermally-activated delayed fluorescence (TADF) in green to orange electromagnetic spectral regions has been developed by using D-A type N^N ligand and P^P ligands. Their structures, electrochemical, photophysical, and electroluminescence properties have been characterized. The complexes exhibit high photoluminescence quantum yields (PLQYs) of up to 0.71 at room temperature in doped film and the lifetimes are in a wide range of 4.3-24.1 μs. Density functional theory (DFT) calculations on the complexes reveal the lowest-lying intraligand charge-transfer excited states that are localized on the N^N ligands. Solution-processed organic light emitting diodes (OLEDs) based on one of the new emitters show a maximum external quantum efficiency (EQE) of 7.96%.

| S-EPMC7924317 | biostudies-literature

Benzoate-based thermally activated delayed fluorescence materials.

Project description:Compounds PTZ-MBZ (methyl 3-(10H-phenothiazin-10-yl)benzoate) and DMAC-MBZ (methyl 3-(9,9-dimethylacridin-10(9H)-yl)benzoate) were conveniently synthesized, and they exhibited TADF properties with lifetimes of 0.80 and 2.17 μs, respectively. The spatially separated highest occupied molecular orbital and lowest unoccupied molecular orbital resulted in a very small singlet-triplet energy gap of 0.0152 eV and 0.0640 eV, respectively. Thermally activated delayed fluorescence materials with short lifetime could be used as promising luminescent materials for organic light-emitting diodes.

| S-EPMC10346356 | biostudies-literature

Thermally Activated Delayed Fluorescence Coinage Metal Cluster Scintillator.

Project description:X-ray scintillators are widely used in medical imaging, industrial flaw detection, security inspection, and space exploration. However, traditional commercial scintillators are usually associated with a high use cost because of their substantial toxicity and easy deliquescence. In this work, an atomically precise Au-Cu cluster scintillator (1) with a thermally activated delayed fluorescence (TADF) property was facilely synthesized, which is environmentally friendly and highly stable to water and oxygen. The TADF property of 1 endows it with an ultrahigh exciton utilization rate. Combined with the effective absorption of X-ray caused by the heavy-atom effect and a limited nonradiative transition caused by close packing in the crystal state, 1 exhibits an excellent radioluminescence property. Moreover, 1 has good processability for fabricating a large, flexible thin-film device (10 cm × 10 cm) for high-resolution X-ray imaging, which can reach 40 μm (12.5 LP mm-1). The properties mentioned earlier make the coinage metal cluster promising for use as a substitute for traditional commercial scintillators.

| S-EPMC10375876 | biostudies-literature

Thermally Activated Delayed Fluorescence in Cu<sup>I</sup> Complexes Originating from Restricted Molecular Vibrations.

Project description:The mechanism of thermally activated delayed fluorescence (TADF) in molecules in aggregated or condensed solid states has been rarely studied and is not well understood. Nevertheless, many applications of TADF emitters are strongly affected by their luminescence properties in the aggregated state. In this study, two new isomeric tetradentate CuI complexes which simultaneously show aggregation induced emission (AIE) and TADF characteristics are reported for the first time. We provide direct evidence that effectively restricting the vibrations of individual molecules is a key requisite for TADF in these two CuI complexes through in-depth photophysical measurements combined with kinetic methods, single crystal analysis and theoretical calculations. These findings should stimulate new molecular engineering endeavours in the design of AIE-TADF active materials with highly emissive aggregated states.

| S-EPMC5724495 | biostudies-literature

Persistent Dimer Emission in Thermally Activated Delayed Fluorescence Materials.

Project description:We expose significant changes in the emission color of carbazole-based thermally activated delayed fluorescence (TADF) emitters that arise from the presence of persistent dimer states in thin films and organic light-emitting diodes (OLEDs). Direct photoexcitation of this dimer state in 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) reveals the significant influence of dimer species on the color purity of its photoluminescence and electroluminescence. The dimer species is sensitive to the sample preparation method, and its enduring presence contributes to the widely reported concentration-mediated red shift in the photoluminescence and electroluminescence of evaporated thin films. This discovery has implications on the usability of these, and similar, molecules for OLEDs and explains disparate electroluminescence spectra presented in the literature for these compounds. The dimerization-controlled changes observed in the TADF process and photoluminescence efficiency mean that careful consideration of dimer states is imperative in the design of future TADF emitters and the interpretation of previously reported studies of carbazole-based TADF materials.

| S-EPMC6501699 | biostudies-literature

Efficient Adversarial Generation of Thermally Activated Delayed Fluorescence Molecules.

Project description:Adversarial generative models are becoming an essential tool in molecular design and discovery due to their efficiency in exploring the desired chemical space with the assistance of deep learning. In this article, we introduce an integrated framework by combining the modules of algorithmic synthesis, deep prediction, adversarial generation, and fine screening for the purpose of effective design of the thermally activated delayed fluorescence (TADF) molecules that can be used in the organic light-emitting diode devices. The retrosynthetic rules are employed to algorithmically synthesize the D-A complex based on the empirically defined donor and acceptor moieties, which is followed by the high-throughput labeling and prediction with the deep neural network. The new D-A molecules are subsequently generated via the adversarial autoencoder, with the excited-state property distributions perfectly matching those of the original samples. Fine screening of the generated molecules, including the spin-orbital coupling calculation and the excited-state optimization, is eventually implemented to select the qualified TADF candidates within the novel chemical space. Further investigation shows that the created structures fully mimic the original D-A samples by maintaining a significant charge transfer characteristic, a minimal adiabatic singlet-triplet gap, and a moderate spin-orbital coupling that are desirable for the delayed fluorescence.

| S-EPMC9161419 | biostudies-literature

Halogenated Thermally Activated Delayed Fluorescence Materials for Efficient Scintillation.

Project description:Organic scintillators, materials with the ability to exhibit luminescence when exposed to X-rays, have aroused increasing interest in recent years. However, the enhancement of radioluminescence and improving X-ray absorption of organic scintillators lie in the inherent dilemma, due to the waste of triplet excitons and weak X-ray absorption during scintillation. Here, we employ halogenated thermally activated delayed fluorescence materials to improve the triplet exciton utilization and X-ray absorption simultaneously, generating efficient scintillation with a low detection limit, which is one order of magnitude lower than the dosage for X-ray medical diagnostics. Through experimental study and theoretical calculation, we reveal the positive role of X-ray absorption, quantum yields of prompt fluorescence, and intersystem crossing in promoting the radioluminescence intensity. This finding offers an opportunity to design diverse types of organic scintillators and expands the applications of thermally activated delayed fluorescence.

| S-EPMC10044329 | biostudies-literature

Direct observation of intersystem crossing in a thermally activated delayed fluorescence copper complex in the solid state.

Project description:Intersystem crossing in thermally activated delayed fluorescence (TADF) materials is an important process that controls the rate at which singlet states convert to triplets; however, measuring this directly in TADF materials is difficult. TADF is a significant emerging technology that enables the harvesting of triplets as well as singlet excited states for emission in organic light emitting diodes. We have observed the picosecond time-resolved photoluminescence of a highly luminescent, neutral copper(I) complex in the solid state that shows TADF. The time constant of intersystem crossing is measured to be 27 picoseconds. Subsequent overall reverse intersystem crossing is slow, leading to population equilibration and TADF with an average lifetime of 11.5 microseconds. These first measurements of intersystem crossing in the solid state in this class of mononuclear copper(I) complexes give a better understanding of the excited-state processes and mechanisms that ensure efficient TADF.

| S-EPMC4705038 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data