Project description:Quantum data are susceptible to decoherence induced by the environment and to errors in the hardware processing it. A future fault-tolerant quantum computer will use quantum error correction to actively protect against both. In the smallest error correction codes, the information in one logical qubit is encoded in a two-dimensional subspace of a larger Hilbert space of multiple physical qubits. For each code, a set of non-demolition multi-qubit measurements, termed stabilizers, can discretize and signal physical qubit errors without collapsing the encoded information. Here using a five-qubit superconducting processor, we realize the two parity measurements comprising the stabilizers of the three-qubit repetition code protecting one logical qubit from physical bit-flip errors. While increased physical qubit coherence times and shorter quantum error correction blocks are required to actively safeguard the quantum information, this demonstration is a critical step towards larger codes based on multiple parity measurements.
Project description:The spins of atoms and atom-like systems are among the most coherent objects in which to store quantum information. However, the need to address them using oscillating magnetic fields hinders their integration with quantum electronic devices. Here, we circumvent this hurdle by operating a single-atom "flip-flop" qubit in silicon, where quantum information is encoded in the electron-nuclear states of a phosphorus donor. The qubit is controlled using local electric fields at microwave frequencies, produced within a metal-oxide-semiconductor device. The electrical drive is mediated by the modulation of the electron-nuclear hyperfine coupling, a method that can be extended to many other atomic and molecular systems and to the hyperpolarization of nuclear spin ensembles. These results pave the way to the construction of solid-state quantum processors where dense arrays of atoms can be controlled using only local electric fields.
Project description:We present a scheme for multi-bit quantum random number generation using a single qubit discrete-time quantum walk in one-dimensional space. Irrespective of the initial state of the qubit, quantum interference and entanglement of particle with the position space in the walk dynamics certifies high randomness in the system. Quantum walk in a position space of dimension 2l?+?1 ensures string of (l?+?2)-bits of random numbers from a single measurement. Bit commitment with the position space and control over the spread of the probability distribution in position space enable us with options to extract multi-bit random numbers. This highlights the power of one qubit, its practical importance in generating multi-bit string in single measurement and the role it can play in quantum communication and cryptographic protocols. This can be further extended with quantum walks in higher dimensions.
Project description:We develop model averaging estimation in the linear regression model where some covariates are subject to measurement error. The absence of the true covariates in this framework makes the calculation of the standard residual-based loss function impossible. We take advantage of the explicit form of the parameter estimators and construct a weight choice criterion. It is asymptotically equivalent to the unknown model average estimator minimizing the loss function. When the true model is not included in the set of candidate models, the method achieves optimality in terms of minimizing the relative loss, whereas, when the true model is included, the method estimates the model parameter with root n rate. Simulation results in comparison with existing Bayesian information criterion and Akaike information criterion model selection and model averaging methods strongly favour our model averaging method. The method is applied to a study on health.
Project description:The recent release of twenty-two new genome sequences has dramatically increased the data available for mammalian comparative genomics, but twenty of these new sequences are currently limited to ∼2× coverage. Here we examine the extent of sequencing error in these 2× assemblies, and its potential impact in downstream analyses. By comparing 2× assemblies with high-quality sequences from the ENCODE regions, we estimate the rate of sequencing error to be 1-4 errors per kilobase. While this error rate is fairly modest, sequencing error can still have surprising effects. For example, an apparent lineage-specific insertion in a coding region is more likely to reflect sequencing error than a true biological event, and the length distribution of coding indels is strongly distorted by error. We find that most errors are contributed by a small fraction of bases with low quality scores, in particular, by the ends of reads in regions of single-read coverage in the assembly. We explore several approaches for automatic sequencing error mitigation (SEM), making use of the localized nature of sequencing error, the fact that it is well predicted by quality scores, and information about errors that comes from comparisons across species. Our automatic methods for error mitigation cannot replace the need for additional sequencing, but they do allow substantial fractions of errors to be masked or eliminated at the cost of modest amounts of over-correction, and they can reduce the impact of error in downstream phylogenomic analyses. Our error-mitigated alignments are available for download.
Project description:Thermoelectric effects in magnetic tunnel junctions are promising to serve as the basis for logic devices or memories in a "green" information technology. However, up to now the readout contrast achieved with Seebeck effects was magnitudes smaller compared to the well-established tunnel magnetoresistance effect. Here, we resolve this problem by demonstrating that the tunnel magneto-Seebeck effect (TMS) in CoFeB/MgO/CoFeB tunnel junctions can be switched on to a logic "1" state and off to "0" by simply changing the magnetic state of the CoFeB electrodes. This new functionality is achieved by combining a thermal gradient and an electric field. Our results show that the signal crosses zero and can be adjusted by tuning a bias voltage that is applied between the electrodes of the junction; hence, the name of the effect is bias-enhanced tunnel magneto-Seebeck effect (bTMS). Via the spin- and energy-dependent transmission of electrons in the junction, the bTMS effect can be configured using the bias voltage with much higher control than the tunnel magnetoresistance and even completely suppressed for only one magnetic configuration. Moreover, our measurements are a step towards the experimental realization of high TMS ratios without additional bias voltage, which are predicted for specific Co-Fe compositions.
Project description:The Controlled-NOT (CNOT) gate is the key to unlock the power of quantum computing as it is a fundamental component of a universal set of gates. We demonstrate the operation of a two-bit C-NOT quantum-like gate using classical qubit acoustic analogues, called herein logical phi-bits. The logical phi-bits are supported by an externally driven nonlinear acoustic metamaterial composed of a parallel array of three elastically coupled waveguides. A logical phi-bit has a two-state degree of freedom associated with the two independent relative phases of the acoustic wave in the three waveguides. A simple physical manipulation involving the detuning of the frequency of one of the external drivers is shown to operate on the complex vectors in the Hilbert space of pairs of logical phi-bits. This operation achieves a systematic and predictable C-NOT gate with unambiguously measurable input and output. The possibility of scaling the approach to more phi-bits is promising.
Project description:The fundamental unit for quantum computing is the qubit, an isolated, controllable two-level system. However, for many proposed quantum computer architectures, especially photonic systems, the qubits can be lost or can leak out of the desired two-level systems, posing a significant obstacle for practical quantum computation. Here, we experimentally demonstrate, both in the quantum circuit model and in the one-way quantum computer model, the smallest nontrivial quantum codes to tackle this problem. In the experiment, we encode single-qubit input states into highly entangled multiparticle code words, and we test their ability to protect encoded quantum information from detected 1-qubit loss error. Our results prove in-principle the feasibility of overcoming the qubit loss error by quantum codes.
Project description:Realizing the potential of quantum computing requires sufficiently low logical error rates1. Many applications call for error rates as low as 10-15 (refs. 2-9), but state-of-the-art quantum platforms typically have physical error rates near 10-3 (refs. 10-14). Quantum error correction15-17 promises to bridge this divide by distributing quantum logical information across many physical qubits in such a way that errors can be detected and corrected. Errors on the encoded logical qubit state can be exponentially suppressed as the number of physical qubits grows, provided that the physical error rates are below a certain threshold and stable over the course of a computation. Here we implement one-dimensional repetition codes embedded in a two-dimensional grid of superconducting qubits that demonstrate exponential suppression of bit-flip or phase-flip errors, reducing logical error per round more than 100-fold when increasing the number of qubits from 5 to 21. Crucially, this error suppression is stable over 50 rounds of error correction. We also introduce a method for analysing error correlations with high precision, allowing us to characterize error locality while performing quantum error correction. Finally, we perform error detection with a small logical qubit using the 2D surface code on the same device18,19 and show that the results from both one- and two-dimensional codes agree with numerical simulations that use a simple depolarizing error model. These experimental demonstrations provide a foundation for building a scalable fault-tolerant quantum computer with superconducting qubits.
Project description:Quantum error correction is an essential ingredient for universal quantum computing. Despite tremendous experimental efforts in the study of quantum error correction, to date, there has been no demonstration in the realisation of universal quantum error-correcting code, with the subsequent verification of all key features including the identification of an arbitrary physical error, the capability for transversal manipulation of the logical state and state decoding. To address this challenge, we experimentally realise the [5, 1, 3] code, the so-called smallest perfect code that permits corrections of generic single-qubit errors. In the experiment, having optimised the encoding circuit, we employ an array of superconducting qubits to realise the [5, 1, 3] code for several typical logical states including the magic state, an indispensable resource for realising non-Clifford gates. The encoded states are prepared with an average fidelity of [Formula: see text] while with a high fidelity of [Formula: see text] in the code space. Then, the arbitrary single-qubit errors introduced manually are identified by measuring the stabilisers. We further implement logical Pauli operations with a fidelity of [Formula: see text] within the code space. Finally, we realise the decoding circuit and recover the input state with an overall fidelity of [Formula: see text], in total with 92 gates. Our work demonstrates each key aspect of the [5, 1, 3] code and verifies the viability of experimental realisation of quantum error-correcting codes with superconducting qubits.