The effect of new LED lighting systems on the colour of modern paints
Ontology highlight
ABSTRACT:
SUBMITTER: Pintus V
PROVIDER: S-EPMC8599686 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:This study aims to investigate the chemical stability of some modern paint samples exposed to a new Light Emitting Diode (LED)-lighting system and a halogen lamp by using micro-attenuated total reflectance of Fourier transform infrared spectroscopy (µ-ATR-FTIR), µ-Raman, pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS), and thermally assisted hydrolysis and methylation of GC/MS (THM-GC/MS). Those investigations were performed before and after the exposure of the samples to lightings for 1250, 2400, 3300, and 5000 h. The results obtained with µ-Raman spectroscopy show the high stability of the selected inorganic pigments after the exposure to the lighting systems; while similar to the UV/Vis/NIR results reported in a previous study, µ-ATR-FTIR and THM-GC/MS results evidence greater chemical changes occurring principally on the linseed oil binder-based mock-ups among the acrylic and alkyd-based samples. Moreover, principal component analyses (PCA) and hierarchical cluster analyses (HCA) of THM-GC/MS results highlight that those changes were mostly dependent on the exposure time and on the type of pigment, while being independent of the lighting system used. Finally, semi-quantitative µ-ATR-FTIR results show slight pigment enrichment at the paint surface due to the auto and photo-oxidative degradation of the linseed oil binder.
| S-EPMC8707339 | biostudies-literature
Project description:Using specific photoreceptors, plants can sense light signals fundamental to their growth and development under changing light conditions. Phytochromes sense red and far-red light, cryptochromes and phototropins sense UV-A and blue light, while the UVR8 gene senses UV-B signals. The study of the molecular mechanisms used by plants to respond to artificial biophilic lighting is of pivotal importance for the implementation of biophilic approaches in indoor environments. CoeLux® is a new lighting system that reproduces the effect of natural sunlight entering through an opening in the ceiling, with a realistic sun perceived at an infinite distance surrounded by a clear blue sky. We used the model plant Arabidopsis thaliana to assess the gene expression of the main plant photoreceptors at different light intensities and at different times after exposure to the CoeLux® light type, using high-pressure sodium (HPS) lamps as control light type. Genes belonging to different families of photoreceptors showed a similar expression pattern, suggesting the existence of a common upstream regulation of mRNA transcription. In particular, PHYA, PHYC, PHYD, CRY1, CRY2, PHOT1, and UVR8, showed a common expression pattern with marked differences between the two light types applied; under the HPS light type, the expression levels are raising with the decrease of light intensity, while under the CoeLux® light type, the expression levels remain nearly constant at a high fold. Moreover, we showed that under biophilic illumination the light spectrum plays a crucial role in the response of plants to light intensity, both at the molecular and morphological levels.
| S-EPMC9187123 | biostudies-literature
Project description:As issues of environment and energy draw keen interest around the globe due to such problems as global warming and the energy crisis, LED with high optical efficiency is brought to the fore as the next generation lighting. In addition, as the national income level gets higher and life expectancy is extended, interest in the enhancement of life quality is increasing. Accordingly, the trend of lightings is changing from mere adjustment of light intensity to system lighting in order to enhance the quality of one's life as well as reduce energy consumption. Thus, this study aims to design LED context lighting system that automatically recognizes the location and acts of a user in residential areas and creates an appropriate lighting environment. The proposed system designed in this study includes three types of processing: first, the creation of a lighting environment index suitable for the user's surroundings and lighting control scenarios and second, it measures and analyzes the optical characteristics that change depending on the dimming control of lighting and applies them to the index. Lastly, it adopts PIR, piezoelectric, and power sensor to grasp the location and acts of the user and create a lighting environment suitable for the current context.
| S-EPMC4101242 | biostudies-other
Project description:Light plays a vital role on the growth and development of plant. On the base of white light with high color rendering to the benefit of human survival and life, we proposed to improve "color rendering" of LED lighting for accelerating the growth of lettuce. Seven spectral LED lights were adopted to irradiate the lettuces under 150 μmol·m-2·s-1 for a 16 hd-1 photoperiod. The leaf area and number profiles, plant biomass, and photosynthetic rate under the as-prepared LED light treatments were investigated. We let the absorption spectrum of fresh leaf be the emission spectrum of ideal light and then evaluate the "color rendering" of as-prepared LED lights by the Pearson product-moment correlation coefficient and CIE chromaticity coordinates. Under the irradiation of red-yellow-blue light with high correlation coefficient of 0.587, the dry weights and leaf growth rate are 2-3 times as high as the sharp red-blue light. The optimized LED light for lettuce growth can be presumed to be limited to the angle (about 75°) between the vectors passed through the ideal light in the CIE chromaticity coordinates. These findings open up a new idea to assess and find the optimized LED light for plant growth.
| S-EPMC5377472 | biostudies-literature
Project description:Spectroscopic and mass spectrometric analytical techniques were used to characterise two naturally aged Winsor & Newton (W&N) Winsor Green (phthalocyanine green, PG7) artists' oil colour paint swatches dating to 1993 and 2003. Infrared and Energy Dispersive X-ray (EDX) analysis indicated that the swatches were of closely similar composition, yet the swatch from 2003 was water-sensitive whilst the swatch from 1993 was not. Water-sensitivity is a conservation challenge associated with significant numbers of modern oil paintings and this study aimed to further develop our understanding of the molecular causes of water sensitivity. SEM elemental mapping of samples taken from both swatches provided no indication for the formation of epsomite - a known cause of water sensitivity in some modern oil paintings. Liquid chromatography coupled with mass spectrometry (HPLC-MS) and gas chromatography coupled with mass spectrometry (GC-MS) also revealed very similar qualitative-quantitative composition in terms of unbound and esterified medium fractions. The polymeric network was investigated using analytical pyrolysis. A combination of flash pyrolysis coupled with gas chromatography mass spectrometry (Py-GC-MS) together with evolved gas analysis mass spectrometry (EGA-MS) revealed that the polymeric material was relatively more abundant in the non-water-sensitive paint. This is the first multi-analytical study that has demonstrated a correlation between water-sensitivity and the degree of polymerisation of the oil medium; independent of other known causes of water-sensitivity.
| S-EPMC6400961 | biostudies-literature
Project description:The surface properties of an object, such as texture, glossiness or colour, provide important cues to its identity. However, the actual visual stimulus received by the eye is determined by both the properties of the object and the illumination. We tested whether operational colour constancy for glossy objects (the ability to distinguish changes in spectral reflectance of the object, from changes in the spectrum of the illumination) was affected by rotational motion of either the object or the light source. The different chromatic and geometric properties of the specular and diffuse reflections provide the basis for this discrimination, and we systematically varied specularity to control the available information. Observers viewed animations of isolated objects undergoing either lighting or surface-based spectral transformations accompanied by motion. By varying the axis of rotation, and surface patterning or geometry, we manipulated: (i) motion-related information about the scene, (ii) relative motion between the surface patterning and the specular reflection of the lighting, and (iii) image disruption caused by this motion. Despite large individual differences in performance with static stimuli, motion manipulations neither improved nor degraded performance. As motion significantly disrupts frame-by-frame low-level image statistics, we infer that operational constancy depends on a high-level scene interpretation, which is maintained in all conditions.
| S-EPMC5717688 | biostudies-literature
Project description:The 20th century has seen a significant evolution in artists' paint formulation and technology which is likely to relate to the new conservation challenges frequently presented by modern oil paintings, including unpredictable water- and solvent-sensitivity. This study examined the molecular causes and mechanisms behind these types of modern oil paint vulnerability. Research performed up to now has suggested a correlation between the occurrence of water sensitivity and the presence of relatively high amounts of extractable free dicarboxylic acids. To explore this further, as well as the influence of paint formulation, a set of model paint samples, produced in 2006 using commercial tube paints to which known amounts of additives were added, were analysed. The samples were tested for water sensitivity by aqueous swabbing and characterised using transmission Fourier Transform-Infra Red spectroscopy (FTIR) to determine the molecular composition of the main paint constituents, High Performance Liquid Chromatography-Mass Spectrometry (HPLC-MS), to identify the type(s) of drying oils used as binders, and Gas Chromatography-Mass Spectrometry (GC-MS) using a recently developed analytical procedure that can discriminate and quantify free fatty and dicarboxylic acids, as well as their corresponding metal soaps (carboxylates of fatty and dicarboxylic acids). The results indicated that the addition of small amounts of additives can influence the water sensitivity of an oil paint, as well as its molecular composition. Additionally the nature of the ionomeric/polymeric network appears to be a significant determining factor in the development of water sensitivity.
| S-EPMC9078243 | biostudies-literature
Project description:Spatial variation in lighting environments frequently leads to population variation in colour patterns, colour preferences and visual systems. Yet lighting conditions also vary diurnally, and many aspects of visual systems and behaviour vary over this time scale. Here, we use the bluefin killifish (Lucania goodei) to compare how diurnal variation and habitat variation (clear versus tannin-stained water) affect opsin expression and the preference to peck at different-coloured objects. Opsin expression was generally lowest at midnight and dawn, and highest at midday and dusk, and this diurnal variation was many times greater than variation between habitats. Pecking preference was affected by both diurnal and habitat variation but did not correlate with opsin expression. Rather, pecking preference matched lighting conditions, with higher preferences for blue at noon and for red at dawn/dusk, when these wavelengths are comparatively scarce. Similarly, blue pecking preference was higher in tannin-stained water where blue wavelengths are reduced. In conclusion, L. goodei exhibits strong diurnal cycles of opsin expression, but these are not tightly correlated with light intensity or colour. Temporally variable pecking preferences probably result from lighting environment rather than from opsin production. These results may have implications for the colour pattern diversity observed in these fish.
| S-EPMC3774230 | biostudies-literature
Project description:Fluorescent carbon nanomaterials, especially zero-dimensional (0D) carbon nanodots (CDs), are widely used in broad biological and optoelectronic applications. CDs have unique characteristics such as strong fluorescence, biocompatibility, sun-light response, and capability of mass-production. Beyond the previous green CD obtained from harmful natural substances, we report a new type of fluid-based fluorescent CD paints (C-paints) derived from polyethylene glycol (PEG; via simple ultrasound irradiation at room temperatures) and produced in quantum yields of up to ~14%. Additionally, C-paints possess a strong, UV- and visible-light-responsive photoluminescent (PL) property. Most especially, C-paints, by incorporation into a photocatalytic system, show additional roles in the emission of fluorescent light for activation of TiO2 nanoparticles (NPs) and the resultant detoxification of most organic dyes, thus further enabling embarkation in advanced water purification.
| S-EPMC5378878 | biostudies-other
Project description:For decisions on supplemental lighting a quantitative knowledge of the plants' responses to light under varying conditions is fundamental. In this study, we developed light dose-response curves of growth and morphological traits for Ocimum basilicum L. and examined the effects of light color (blue, red, and white plus far-red) and natural environment (season) on these curves. Four greenhouse experiments were conducted throughout the year to determine the efficiencies of the light regimes on growth and their effects on plant morphology. A special aspect was the photosynthetic efficiency of far-red light. Linear and monomolecular relationships were found for the relationships between plant traits and supplemental light dose. Traits related to biomass productivity increased linearly with light dose whereas some morphological characters showed a saturation behavior. Red light and white plus far-red light were more efficient in plant dry weight production than blue light, and the plants adapted differently to the light qualities: higher biomass under red light was related to a plant architecture more favorable for light capture, i.e., taller plants and bigger leaves. White plus far-red light, on the other hand, increased leaf mass per area (LMA) and light use efficiency (LUE). Blue light resulted in lowest plant light interception and LUE. Considering photosynthetic effects of near-infrared light (PPFD800, 400-800 nm) instead of photosynthetic photon flux density (PPFD700, 400-700 nm) led to strongly reduced efficiencies. Traits related to photosynthesis such as dry weight, LMA and LUE were particularly affected by PPFD800. There were no interactions between the efficiencies of the different light colors and the seasons. Efficiencies of all light regimes were significantly lower during summer compared to spring and winter. Higher dry weight production during summer compared to winter and spring were a consequence of increased light interception rather than changes in LUE. The observed differences in seasonal efficiencies were directly linked to the amount of natural light present as indicated by changes in the ratio of supplemental to natural light.
| S-EPMC8056084 | biostudies-literature