Effectiveness of 3D-printed orthoses for traumatic and chronic hand conditions: A scoping review
Ontology highlight
ABSTRACT: Background
In the field of orthotics, the use of three-dimensional (3D) technology as an alternative to the conventional production process of orthoses is growing. Purpose
This scoping review aimed to systematically map and summarize studies assessing the effectiveness of 3D-printed orthoses for traumatic and chronic hand conditions, and to identify knowledge gaps. Methods
The Cochrane Library, PubMed, EMBASE, CINAHL, Web of Science, IEEE, and PEDro were searched for studies of any type of 3D-printed orthoses for traumatic and chronic hand conditions. Any outcome related to the effectiveness of 3D-printed orthoses was considered. Two reviewers selected eligible studies, charted data on study characteristics by impairment type, and critically appraised the studies, except for case reports/series. Results
Seventeen studies were included: four randomized controlled trials, four uncontrolled trials, four case series and five case reports. Only three studies had a sample size >20. Impairments described were forearm fractures (n = 5), spasticity (n = 5), muscle weakness (n = 4), joint contractures (n = 2) and pain (n = 1). Four poor to fair quality studies on forearm fractures supported the effectiveness of 3D-printed orthoses on hand function, functionality, and satisfaction. One good quality study on spasticity demonstrated the effectiveness of 3D-printed orthoses on hand function. One poor quality pain study reported limited positive effects on satisfaction. Studies on muscle weakness and joint contractures showed no benefits. Conclusion
Current literature addressing the effectiveness of 3D-printed orthoses for traumatic and chronic hand conditions consists primarily of small and poor methodological quality studies. There is a need for well-designed controlled trials including patient-related outcomes, production time and cost analyses.
SUBMITTER: Oud T
PROVIDER: S-EPMC8601455 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:IntroductionHand orthoses are often provided to improve performance of activities of daily life (ADL). Yet, the manufacturing process of conventional custom-fabricated hand orthoses is a time-consuming and labour-intensive process. Even though three-dimensional (3D) printing of orthoses is a rapidly growing area that can facilitate the manufacturing process of hand orthoses, evidence on the effectiveness, costs and production time of 3D-printed orthoses in chronic hand conditions is scarce. This study aims to assess (1) the preliminary effectiveness of 3D-printed orthoses compared with conventionally custom-fabricated orthoses in persons with chronic hand conditions, (2) production time and costs of both orthoses and (3) experiences of the participants and orthotists with the manufacturing process of the 3D-printed orthosis.Methods and analysisIn this prospective non-randomised interventional feasibility study, 20 adults with various chronic hand conditions using a conventional thumb, wrist or wrist-thumb orthosis will be provided with a 3D-printed corresponding type of orthosis. Assessments will be done 2 weeks prior to the intervention and at baseline for the conventional orthosis, and at 1 month and 4 months follow-up for the 3D-printed orthosis. The primary outcome is change from baseline in ADL performance (custom short form Dutch-Flemish Patient-Reported Outcomes Measurement Information System-Upper Extremity; ADL domain Michigan Hand Outcomes Questionnaire Dutch language version (MHQ-DLV)) at 4 months follow-up. Secondary outcomes include general hand function (MHQ-DLV), satisfaction with the orthosis (Dutch Client Satisfaction with Device; Dutch version of the Quebec User Evaluation of Satisfaction with Assistive Technology), usability (in-house questionnaire) and quality of life (EuroQoL 5-Dimension 5-Level). Costs and production time of the conventional and 3D-printed orthoses will be prospectively recorded. Experiences regarding the manufacturing process will be obtained from participants and orthotists (in-house questionnaire).Ethics and disseminationThe Medical Ethics Committee of the Amsterdam UMC, Academic Medical Centre, has waived the requirement for ethical review of this study. Results will be disseminated through peer-reviewed journals, scientific conferences, and media aimed at a broad audience including patients.Trial registration numberNCT05320211.
| S-EPMC10083733 | biostudies-literature
Project description:Background:Ankle-foot orthoses (AFO) are prescribed to manage difficulty walking due to foot drop, bony foot deformities and poor balance. Traditional AFOs are handmade using thermoplastic vacuum forming which provides limited design options, is labour-intensive and associated with long wait times. 3D printing has the potential to transform AFO production and health service delivery. The aim of this systematic review was to determine the feasibility of designing, manufacturing and delivering customised 3D printed AFOs by evaluating the biomechanical outcomes, mechanical properties and fit of 3D printed compared to traditionally manufactured AFOs. Method:Electronic databases were searched from January 1985 to June 2018 according to terms related to 3D printing and AFOs. Studies of any design from healthy or pathological populations of any age were eligible for inclusion. Studies must have investigated the effect of customised 3D printed AFOs using any 3D printing technique on outcomes related to walking ability, biomechanical function, mechanical properties, patient comfort, pain and disability. Any other orthotic type or AFOs without a 3D printed calf and foot section were excluded. The quality of evidence was assessed using the GRADE process. Results:Eleven studies met the eligibility criteria evaluating 3D printed AFOs in healthy adults, and adults and children with unilateral foot drop from a variety of conditions. 3D printing was used to replicate traditional AFOs and develop novel designs to optimise the stiffness properties or reduce the weight and improve the ease of use of the AFO. 3D printed custom AFOs were found to be comparable to traditional custom AFOs and prefabricated AFOs in terms of temporal-spatial parameters. The mechanical stiffness and energy dissipation of 3D printed AFOs were found to be similar to prefabricated carbon-fibre AFOs. However, the sample sizes were small (n?=?1 to 8) and study quality was generally low. Conclusion:The biomechanical effects and mechanical properties of 3D printed AFOs were comparable to traditionally manufactured AFOs. Developing novel AFO designs using 3D printing has many potential benefits including stiffness and weight optimisation to improve biomechanical function and comfort.
| S-EPMC6367826 | biostudies-literature
Project description:3D models have been used as an asset in many clinical applications and a variety of disciplines, and yet the available literature studying the use of 3D models in communication is limited. This scoping review has been conducted to draw conclusions on the current evidence and learn from previous studies, using this knowledge to inform future work. Our search strategy revealed 269 papers, 19 of which were selected for final inclusion and analysis. When assessing the use of 3D models in doctor-patient communication, there is a need for larger studies and studies including a long-term follow up. Furthermore, there are forms of communication that are yet to be researched and provide a niche that may be beneficial to explore.
| S-EPMC8852361 | biostudies-literature
Project description:The centrifuge is an essential tool for many aspects of research and medical diagnostics. However, conventional centrifuges are often inaccessible outside of standard laboratory settings, such as remote field sites, because they require a constant external power source and can be prohibitively costly in resource-limited settings and Science, technology, engineering, and mathematics (STEM)-focused programs. Here we present the 3D-Fuge, a 3D-printed hand-powered centrifuge, as a novel alternative to standard benchtop centrifuges. Based on the design principles of a paper-based centrifuge, this 3D-printed instrument increases the volume capacity to 2 mL and can reach hand-powered centrifugation speeds up to 6,000 rpm. The 3D-Fuge devices presented here are capable of centrifugation of a wide variety of different solutions such as spinning down samples for biomarker applications and performing nucleotide extractions as part of a portable molecular lab setup. We introduce the design and proof-of-principle trials that demonstrate the utility of low-cost 3D-printed centrifuges for use in remote field biology and educational settings.
| S-EPMC6528969 | biostudies-literature
Project description:Advances in additive manufacturing technologies and composite materials are starting to be combined into synergic procedures that may impact the biomedical field by helping to achieve personalized and high-performance solutions for low-resource settings. In this article, we illustrate the benefits of 3D-printed rapid molds, upon which composite fibers can be laminated in a direct and resource-efficient way, for the personalized development of articular splints. The rapid mold concept presented in this work allows for a flexible lamination and curing process, even compatible with autoclaves. We demonstrate the procedure by completely developing an autoclave-cured carbon fiber-epoxy composite ankle immobilizing, supporting, or protecting splint. These medical devices may support patients in their recovery of articular injuries and for promoting a more personalized medical care employing high-performance materials, whose mechanical response is analyzed and compared to that of commercial devices. In fact, this personalization is fundamental for enhanced ergonomics, comfort during rehabilitation, and overall aesthetics. The proposed design and manufacturing strategies may support the low-cost and user-centered development of a wide set of biomedical devices and help to delocalize the supply chain for involving local populations in the development of medical technology.
| S-EPMC7079611 | biostudies-literature
Project description:Dietary flavonoids have antioxidant, anti-inflammatory, and vascular health benefits, which align with the proposed pathophysiology of age-related eye conditions and hearing problems (hearing loss and tinnitus). This scoping review is based on Arksey and O'Malley's six-stage framework and aims to summarise current evidence on the association between the dietary flavonoid intake and chronic sensory conditions in adults, and to identify the research gaps in this area. Eligible studies were identified by searching MEDLINE, EMBASE PsycINFO via the OVID platform, and Google Scholar, as well as manually searching the reference lists of the eligible articles. The inclusion criteria included: articles with full-text access, written in the English language, and focused on chronic sensory conditions and dietary flavonoid intake in an adult population. Studies focused on flavonoid supplements were excluded. Ten studies were included in this review. The evidence suggests that the flavonoid subclass, flavonols, are protective against eye conditions, including age-related macular degeneration, cataract, and glaucoma. There is insufficient evidence to support an association with hearing loss or tinnitus. Overall, dietary flavonol intake appears to be protective against some chronic eye conditions. However, for most eye and hearing-related conditions, only one study was identified. Thus, there is a need for more recent high-quality research to be conducted to confirm any significant associations.
| S-EPMC9311508 | biostudies-literature
Project description:IntroductionPeer support is receiving increasing attention as both an effective and cost-effective intervention method to support the self-management of chronic health conditions. Given that an increasing proportion of Canadians have internet access and the increasing implementation of web-based interventions, online peer support interventions are a promising option to address the burden of chronic diseases. Thus, the specific research question of this scoping review is the following: What is known from the existing literature about the key characteristics of online peer support interventions for adults with chronic conditions? METHODS AND ANALYSIS: We will use the methodological frameworks used by Arksey and O'Malley as well as Levac and colleagues for the current scoping review. To be eligible for inclusion, studies must report on adults (?18 years of age) with one of the Public Health Agency of Canada chronic conditions or HIV/AIDS. We will limit our review to peer support interventions delivered through online formats. All study designs will be included. Only studies published from 2012 onwards will be included to ensure relevance to the current healthcare context and feasibility. Furthermore, only English language studies will be included. Studies will be identified by searching a variety of databases. Two reviewers will independently screen the titles and abstracts identified by the literature search for inclusion (ie, level 1 screening), the full text articles (ie, level 2 screening) and then perform data abstraction. Abstracted data will include study characteristics, participant population, key characteristics of the intervention and outcomes collected.DisseminationThis review will identify the key features of online peer support interventions and could assist in the future development of other online peer support programmes so that effective and sustainable programmes can be developed.
| S-EPMC5623492 | biostudies-literature
Project description:Background:For surgical fixation of bone fractures of the human hand, so-called Kirschner-wires (K-wires) are drilled through bone fragments. Due to the minimally invasive drilling procedures without a view of risk structures like vessels and nerves, a thorough training of young surgeons is necessary. For the development of a virtual reality (VR) based training system, a three-dimensional (3D) printed phantom hand is required. To ensure an intuitive operation, this phantom hand has to be realistic in both, its position relative to the driller as well as in its haptic features. The softest 3D printing material available on the market, however, is too hard to imitate human soft tissue. Therefore, a support-material (SUP) filled metamaterial is used to soften the raw material. Realistic haptic features are important to palpate protrusions of the bone to determine the drilling starting point and angle. An optical real-time tracking is used to transfer position and rotation to the training system. Methods:A metamaterial already developed in previous work is further improved by use of a new unit cell. Thus, the amount of SUP within the volume can be increased and the tissue is softened further. In addition, the human anatomy is transferred to the entire hand model. A subcutaneous fat layer and penetration of air through pores into the volume simulate shiftability of skin layers. For optical tracking, a rotationally symmetrical marker attached to the phantom hand with corresponding reference marker is developed. In order to ensure trouble-free position transmission, various types of marker point applications are tested. Results:Several cuboid and forearm sample prints lead to a final 30 centimeter long hand model. The whole haptic phantom could be printed faultless within about 17 hours. The metamaterial consisting of the new unit cell results in an increased SUP share of 4.32%. Validated by an expert surgeon study, this allows in combination with a displacement of the uppermost skin layer a good palpability of the bones. Tracking of the hand marker in dodecahedron design works trouble-free in conjunction with a reference marker attached to the worktop of the training system. Conclusions:In this work, an optically tracked and haptically correct phantom hand was developed using dual-material 3D printing, which can be easily integrated into a surgical training system.
| S-EPMC7063285 | biostudies-literature
Project description:Soft robotic hands with monolithic structure have shown great potential to be used as prostheses due to their advantages to yield light weight and compact designs as well as its ease of manufacture. However, existing soft prosthetic hands design were often not geared towards addressing some of the practical requirements highlighted in prosthetics research. The gap between the existing designs and the practical requirements significantly hampers the potential to transfer these designs to real-world applications. This work addressed these requirements with the consideration of the trade-off between practicality and performance. These requirements were achieved through exploiting the monolithic 3D printing of soft materials which incorporates membrane enclosed flexure joints in the finger designs, synergy-based thumb motion and cable-driven actuation system in the proposed hand prosthesis. Our systematic design (tentatively named X-Limb) achieves a weight of 253gr, three grasps types (with capability of individual finger movement), power-grip force of 21.5N, finger flexion speed of 1.3sec, a minimum grasping cycles of 45,000 (while maintaining its original functionality) and a bill of material cost of 200 USD (excluding quick disconnect wrist but without factoring in the cost reduction through mass production). A standard Activities Measure for Upper-Limb Amputees benchmark test was carried out to evaluate the capability of X-Limb in performing grasping task required for activities of daily living. The results show that all the practical design requirements are satisfied, and the proposed soft prosthetic hand is able to perform all the real-world grasping tasks of the benchmark tests, showing great potential in improving life quality of individuals with upper limb loss.
| S-EPMC7224508 | biostudies-literature
Project description:INTRODUCTION:This compilation presents a comprehensive review of the literature on common chronic pain conditions of the hand. It briefly presents these common conditions with their biological background, diagnosis, and common management options. It then presents and compares the latest literature available for injection techniques to treat these diagnoses and compares the available evidence. METHODS:A comprehensive literature review was performed in MEDLINE, PubMed, and Cochrane databases from 1996 to 2019 using the terms "hand pain", "injection techniques", "steroid injection", "chronic pain", "osteoarthritis", "rheumatoid arthritis", "carpal tunnel syndrome", "De Quervain's tenosynovitis", "ganglion cyst", "gout", "Raynaud's", and "stenosing tenosynovitis". RESULTS:Hand pain is a common condition with 9.7% prevalence in men and 21.6% in women and can cause significant morbidity and disability. It also carries a significant cost to the individuals and the healthcare system, totaling in $4 billion dollars in 2003. Injection therapy is an alternative when conservative treatment fails. Osteoarthritis is the most common chronic hand pain syndrome and affects about 16% of the population. Its mechanism is largely mechanic, and as such, there is controversy if steroid injections are of benefit. Hyaluronic acid (HA) appears to provide substantial relief of pain and may increase functionality. More studies of HA are required to make a definite judgment on its efficacy. Similarly, steroid ganglion cyst injection may confer little benefit. Carpal tunnel syndrome is a compressive neuropathy, and only temporarily relieved with injection therapy. US-guidance provides significant improvement and, while severe cases may still require surgery, can provide a valuable bridge therapy to surgery when conservative treatment fails. Similar bridging treatments and increased efficacy under US-guidance are effective for stenosing tenosynovitis ("trigger finger"), though, interestingly, inflammatory background is associated with decreased effect in this case. When the etiology of the pain is inflammatory, such as in RA, corticosteroid (CS) injections provide significant pain relief and increased functionality. They do not, however, change the course of disease (unlike DMARDs). Another such example is De-Quervain tenosynovitis that sees good benefit from CS injections, and an increased efficacy with US-guidance, and similarly are CS injections for gout. For Raynaud's phenomenon, Botox injections have encouraging results, but more studies are needed to determine safety and efficacy, as well as the possible difference in effect between primary and secondary Raynaud's. CONCLUSIONS:Chronic hand pain is a prevalent and serious condition and can cause significant morbidity and disability and interferes with independence and activities of daily living. Conservative treatment remains the first line of treatment; however, when first-line treatments fail, steroid injections can usually provide benefit. In some cases, HA or Botox may also be beneficial. US-guidance is increasing in hand injection and almost ubiquitously provides safer, more effective injections. Hand surgery remains the alternative for refractory pain.
| S-EPMC7203307 | biostudies-literature