Spliceator: multi-species splice site prediction using convolutional neural networks
Ontology highlight
ABSTRACT: Background
Ab initio prediction of splice sites is an essential step in eukaryotic genome annotation. Recent predictors have exploited Deep Learning algorithms and reliable gene structures from model organisms. However, Deep Learning methods for non-model organisms are lacking. Results
We developed Spliceator to predict splice sites in a wide range of species, including model and non-model organisms. Spliceator uses a convolutional neural network and is trained on carefully validated data from over 100 organisms. We show that Spliceator achieves consistently high accuracy (89–92%) compared to existing methods on independent benchmarks from human, fish, fly, worm, plant and protist organisms. Conclusions
Spliceator is a new Deep Learning method trained on high-quality data, which can be used to predict splice sites in diverse organisms, ranging from human to protists, with consistently high accuracy. Supplementary Information
The online version contains supplementary material available at 10.1186/s12859-021-04471-3.
SUBMITTER: Scalzitti N
PROVIDER: S-EPMC8609763 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:BackgroundThe accurate identification of the exon/intron boundaries is critical for the correct annotation of genes with multiple exons. Donor and acceptor splice sites (SS) demarcate these boundaries. Therefore, deriving accurate computational models to predict the SS are useful for functional annotation of genes and genomes, and for finding alternative SS associated with different diseases. Although various models have been proposed for the in silico prediction of SS, improving their accuracy is required for reliable annotation. Moreover, models are often derived and tested using the same genome, providing no evidence of broad application, i.e. to other poorly studied genomes.ResultsWith this in mind, we developed the Splice2Deep models for SS detection. Each model is an ensemble of deep convolutional neural networks. We evaluated the performance of the models based on the ability to detect SS in Homo sapiens, Oryza sativa japonica, Arabidopsis thaliana, Drosophila melanogaster, and Caenorhabditis elegans. Results demonstrate that the models efficiently detect SS in other organisms not considered during the training of the models. Compared to the state-of-the-art tools, Splice2Deep models achieved significantly reduced average error rates of 41.97% and 28.51% for acceptor and donor SS, respectively. Moreover, the Splice2Deep cross-organism validation demonstrates that models correctly identify conserved genomic elements enabling annotation of SS in new genomes by choosing the taxonomically closest model.ConclusionsThe results of our study demonstrated that Splice2Deep both achieved a considerably reduced error rate compared to other state-of-the-art models and the ability to accurately recognize SS in other organisms for which the model was not trained, enabling annotation of poorly studied or newly sequenced genomes. Splice2Deep models are implemented in Python using Keras API; the models and the data are available at https://github.com/SomayahAlbaradei/Splice_Deep.git.
| S-EPMC7285987 | biostudies-literature
Project description:The prediction of breeding values and phenotypes is of central importance for both livestock and crop breeding. In this study, we analyze the use of artificial neural networks (ANN) and, in particular, local convolutional neural networks (LCNN) for genomic prediction, as a region-specific filter corresponds much better with our prior genetic knowledge on the genetic architecture of traits than traditional convolutional neural networks. Model performances are evaluated on a simulated maize data panel (n = 10,000; p = 34,595) and real Arabidopsis data (n = 2,039; p = 180,000) for a variety of traits based on their predictive ability. The baseline LCNN, containing one local convolutional layer (kernel size: 10) and two fully connected layers with 64 nodes each, is outperforming commonly proposed ANNs (multi layer perceptrons and convolutional neural networks) for basically all considered traits. For traits with high heritability and large training population as present in the simulated data, LCNN are even outperforming state-of-the-art methods like genomic best linear unbiased prediction (GBLUP), Bayesian models and extended GBLUP, indicated by an increase in predictive ability of up to 24%. However, for small training populations, these state-of-the-art methods outperform all considered ANNs. Nevertheless, the LCNN still outperforms all other considered ANNs by around 10%. Minor improvements to the tested baseline network architecture of the LCNN were obtained by increasing the kernel size and of reducing the stride, whereas the number of subsequent fully connected layers and their node sizes had neglectable impact. Although gains in predictive ability were obtained for large scale data sets by using LCNNs, the practical use of ANNs comes with additional problems, such as the need of genotyping all considered individuals, the lack of estimation of heritability and reliability. Furthermore, breeding values are additive by design, whereas ANN-based estimates are not. However, ANNs also comes with new opportunities, as networks can easily be extended to account for additional inputs (omics, weather etc.) and outputs (multi-trait models), and computing time increases linearly with the number of individuals. With advances in high-throughput phenotyping and cheaper genotyping, ANNs can become a valid alternative for genomic prediction.
| S-EPMC7689358 | biostudies-literature
Project description:BACKGROUND:Identifying splice sites is a necessary step to analyze the location and structure of genes. Two dinucleotides, GT and AG, are highly frequent on splice sites, and many other patterns are also on splice sites with important biological functions. Meanwhile, the dinucleotides occur frequently at the sequences without splice sites, which makes the prediction prone to generate false positives. Most existing tools select all the sequences with the two dimers and then focus on distinguishing the true splice sites from those pseudo ones. Such an approach will lead to a decrease in false positives; however, it will result in non-canonical splice sites missing. RESULT:We have designed SpliceFinder based on convolutional neural network (CNN) to predict splice sites. To achieve the ab initio prediction, we used human genomic data to train our neural network. An iterative approach is adopted to reconstruct the dataset, which tackles the data unbalance problem and forces the model to learn more features of splice sites. The proposed CNN obtains the classification accuracy of 90.25%, which is 10% higher than the existing algorithms. The method outperforms other existing methods in terms of area under receiver operating characteristics (AUC), recall, precision, and F1 score. Furthermore, SpliceFinder can find the exact position of splice sites on long genomic sequences with a sliding window. Compared with other state-of-the-art splice site prediction tools, SpliceFinder generates results in about half lower false positive while keeping recall higher than 0.8. Also, SpliceFinder captures the non-canonical splice sites. In addition, SpliceFinder performs well on the genomic sequences of Drosophila melanogaster, Mus musculus, Rattus, and Danio rerio without retraining. CONCLUSION:Based on CNN, we have proposed a new ab initio splice site prediction tool, SpliceFinder, which generates less false positives and can detect non-canonical splice sites. Additionally, SpliceFinder is transferable to other species without retraining. The source code and additional materials are available at https://gitlab.deepomics.org/wangruohan/SpliceFinder.
| S-EPMC6933889 | biostudies-literature
Project description:Application of deep neural network is a rapidly expanding field now reaching many disciplines including genomics. In particular, convolutional neural networks have been exploited for identifying the functional role of short genomic sequences. These approaches rely on gathering large sets of sequences with known functional role, extracting those sequences from whole-genome-annotations. These sets are then split into learning, test and validation sets in order to train the networks. While the obtained networks perform well on validation sets, they often perform poorly when applied on whole genomes in which the ratio of positive over negative examples can be very different than in the training set. We here address this issue by assessing the genome-wide performance of networks trained with sets exhibiting different ratios of positive to negative examples. As a case study, we use sequences encompassing gene starts from the RefGene database as positive examples and random genomic sequences as negative examples. We then demonstrate that models trained using data from one organism can be used to predict gene-start sites in a related species, when using training sets providing good genome-wide performance. This cross-species application of convolutional neural networks provides a new way to annotate any genome from existing high-quality annotations in a related reference species. It also provides a way to determine whether the sequence motifs recognised by chromatin-associated proteins in different species are conserved or not.
| S-EPMC7924482 | biostudies-literature
Project description:MOTIVATION:Accurate annotation of protein functions is fundamental for understanding molecular and cellular physiology. Data-driven methods hold promise for systematically deriving rules underlying the relationship between protein structure and function. However, the choice of protein structural representation is critical. Pre-defined biochemical features emphasize certain aspects of protein properties while ignoring others, and therefore may fail to capture critical information in complex protein sites. RESULTS:In this paper, we present a general framework that applies 3D convolutional neural networks (3DCNNs) to structure-based protein functional site detection. The framework can extract task-dependent features automatically from the raw atom distributions. We benchmarked our method against other methods and demonstrate better or comparable performance for site detection. Our deep 3DCNNs achieved an average recall of 0.955 at a precision threshold of 0.99 on PROSITE families, detected 98.89 and 92.88% of nitric oxide synthase and TRYPSIN-like enzyme sites in Catalytic Site Atlas, and showed good performance on challenging cases where sequence motifs are absent but a function is known to exist. Finally, we inspected the individual contributions of each atom to the classification decisions and show that our models successfully recapitulate known 3D features within protein functional sites. AVAILABILITY AND IMPLEMENTATION:The 3DCNN models described in this paper are available at https://simtk.org/projects/fscnn. SUPPLEMENTARY INFORMATION:Supplementary data are available at Bioinformatics online.
| S-EPMC6499237 | biostudies-literature
Project description:PurposeTo develop a fast and accurate convolutional neural network based method for segmentation of thalamic nuclei.MethodsA cascaded multi-planar scheme with a modified residual U-Net architecture was used to segment thalamic nuclei on conventional and white-matter-nulled (WMn) magnetization prepared rapid gradient echo (MPRAGE) data. A single network was optimized to work with images from healthy controls and patients with multiple sclerosis (MS) and essential tremor (ET), acquired at both 3 T and 7 T field strengths. WMn-MPRAGE images were manually delineated by a trained neuroradiologist using the Morel histological atlas as a guide to generate reference ground truth labels. Dice similarity coefficient and volume similarity index (VSI) were used to evaluate performance. Clinical utility was demonstrated by applying this method to study the effect of MS on thalamic nuclei atrophy.ResultsSegmentation of each thalamus into twelve nuclei was achieved in under a minute. For 7 T WMn-MPRAGE, the proposed method outperforms current state-of-the-art on patients with ET with statistically significant improvements in Dice for five nuclei (increase in the range of 0.05-0.18) and VSI for four nuclei (increase in the range of 0.05-0.19), while performing comparably for healthy and MS subjects. Dice and VSI achieved using 7 T WMn-MPRAGE data are comparable to those using 3 T WMn-MPRAGE data. For conventional MPRAGE, the proposed method shows a statistically significant Dice improvement in the range of 0.14-0.63 over FreeSurfer for all nuclei and disease types. Effect of noise on network performance shows robustness to images with SNR as low as half the baseline SNR. Atrophy of four thalamic nuclei and whole thalamus was observed for MS patients compared to healthy control subjects, after controlling for the effect of parallel imaging, intracranial volume, gender, and age (p < 0.004).ConclusionThe proposed segmentation method is fast, accurate, performs well across disease types and field strengths, and shows great potential for improving our understanding of thalamic nuclei involvement in neurological diseases.
| S-EPMC7530079 | biostudies-literature
Project description:Keeping identity for a long term after occlusion is still an open problem in the video tracking of zebrafish-like model animals, and accurate animal trajectories are the foundation of behaviour analysis. We utilize the highly accurate object recognition capability of a convolutional neural network (CNN) to distinguish fish of the same congener, even though these animals are indistinguishable to the human eye. We used data augmentation and an iterative CNN training method to optimize the accuracy for our classification task, achieving surprisingly accurate trajectories of zebrafish of different size and age zebrafish groups over different time spans. This work will make further behaviour analysis more reliable.
| S-EPMC5314376 | biostudies-other
Project description:Motivation:Significant improvements in the prediction of protein residue-residue contacts are observed in the recent years. These contacts, predicted using a variety of coevolution-based and machine learning methods, are the key contributors to the recent progress in ab initio protein structure prediction, as demonstrated in the recent CASP experiments. Continuing the development of new methods to reliably predict contact maps is essential to further improve ab initio structure prediction. Results:In this paper we discuss DNCON2, an improved protein contact map predictor based on two-level deep convolutional neural networks. It consists of six convolutional neural networks-the first five predict contacts at 6, 7.5, 8, 8.5 and 10?Å distance thresholds, and the last one uses these five predictions as additional features to predict final contact maps. On the free-modeling datasets in CASP10, 11 and 12 experiments, DNCON2 achieves mean precisions of 35, 50 and 53.4%, respectively, higher than 30.6% by MetaPSICOV on CASP10 dataset, 34% by MetaPSICOV on CASP11 dataset and 46.3% by Raptor-X on CASP12 dataset, when top L/5 long-range contacts are evaluated. We attribute the improved performance of DNCON2 to the inclusion of short- and medium-range contacts into training, two-level approach to prediction, use of the state-of-the-art optimization and activation functions, and a novel deep learning architecture that allows each filter in a convolutional layer to access all the input features of a protein of arbitrary length. Availability and implementation:The web server of DNCON2 is at http://sysbio.rnet.missouri.edu/dncon2/ where training and testing datasets as well as the predictions for CASP10, 11 and 12 free-modeling datasets can also be downloaded. Its source code is available at https://github.com/multicom-toolbox/DNCON2/. Contact:chengji@missouri.edu. Supplementary information:Supplementary data are available at Bioinformatics online.
| S-EPMC5925776 | biostudies-literature
Project description:MotivationThe correct localization of proteins in cell compartments is a key issue for their function. Particularly, mitochondrial proteins are physiologically active in different compartments and their aberrant localization contributes to the pathogenesis of human mitochondrial pathologies. Many computational methods exist to assign protein sequences to subcellular compartments such as nucleus, cytoplasm and organelles. However, a substantial lack of experimental evidence in public sequence databases hampered so far a finer grain discrimination, including also intra-organelle compartments.ResultsWe describe DeepMito, a novel method for predicting protein sub-mitochondrial cellular localization. Taking advantage of powerful deep-learning approaches, such as convolutional neural networks, our method is able to achieve very high prediction performances when discriminating among four different mitochondrial compartments (matrix, outer, inner and intermembrane regions). The method is trained and tested in cross-validation on a newly generated, high-quality dataset comprising 424 mitochondrial proteins with experimental evidence for sub-organelle localizations. We benchmark DeepMito towards the only one recent approach developed for the same task. Results indicate that DeepMito performances are superior. Finally, genomic-scale prediction on a highly-curated dataset of human mitochondrial proteins further confirms the effectiveness of our approach and suggests that DeepMito is a good candidate for genome-scale annotation of mitochondrial protein subcellular localization.Availability and implementationThe DeepMito web server as well as all datasets used in this study are available at http://busca.biocomp.unibo.it/deepmito. A standalone version of DeepMito is available on DockerHub at https://hub.docker.com/r/bolognabiocomp/deepmito. DeepMito source code is available on GitHub at https://github.com/BolognaBiocomp/deepmito.Supplementary informationSupplementary data are available at Bioinformatics online.
| S-EPMC6956790 | biostudies-literature
Project description:Inverse problems in image processing, phase imaging, and computer vision often share the same structure of mapping input image(s) to output image(s) but are usually solved by different application-specific algorithms. Deep convolutional neural networks have shown great potential for highly variable tasks across many image-based domains, but sometimes can be challenging to train due to their internal non-linearity. We propose a novel, fast-converging neural network architecture capable of solving generic image(s)-to-image(s) inverse problems relevant to a diverse set of domains. We show this approach is useful in recovering wavefronts from direct intensity measurements, imaging objects from diffusely reflected images, and denoising scanning transmission electron microscopy images, just by using different training datasets. These successful applications demonstrate the proposed network to be an ideal candidate solving general inverse problems falling into the category of image(s)-to-image(s) translation.
| S-EPMC7109091 | biostudies-literature