Browse
Submit Data
Databases
API
Help

Dataset Information

9 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Designing a Multifunctional Catalyst for the Direct Production of Gasoline-Range Isoparaffins from CO₂.

ABSTRACT: The production of carbon-neutral fuels from CO₂ presents an avenue for causing an appreciable effect in terms of volume toward the mitigation of global carbon emissions. To that end, the production of isoparaffin-rich fuels is highly desirable. Here, we demonstrate the potential of a multifunctional catalyst combination, consisting of a methanol producer (InCo) and a Zn-modified zeolite beta, which produces a mostly isoparaffinic hydrocarbon mixture from CO₂ (up to ∼85% isoparaffin selectivity among hydrocarbons) at a CO₂ conversion of >15%. The catalyst combination was thoroughly characterized via an extensive complement of techniques. Specifically, operando X-ray absorption spectroscopy (XAS) reveals that Zn (which plays a crucial role of providing a hydrogenating function, improving the stability of the overall catalyst combination and isomerization performance) is likely present in the form of Zn₆O₆ clusters within the zeolite component, in contrast to previously reported estimations.

SUBMITTER: Dokania A

PROVIDER: S-EPMC8611669 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Multifunctional Catalyst Combination for the Direct Conversion of CO2 to Propane.

Project description:The production of carbon-rich hydrocarbons via CO2 valorization is essential for the transition to renewable, non-fossil-fuel-based energy sources. However, most of the recent works in the state of the art are devoted to the formation of olefins and aromatics, ignoring the rest of the hydrocarbon commodities that, like propane, are essential to our economy. Hence, in this work, we have developed a highly active and selective PdZn/ZrO2+SAPO-34 multifunctional catalyst for the direct conversion of CO2 to propane. Our multifunctional system displays a total selectivity to propane higher than 50% (with 20% CO, 6% C1, 13% C2, 10% C4, and 1% C5) and a CO2 conversion close to 40% at 350 °C, 50 bar, and 1500 mL g-1 h-1. We attribute these results to the synergy between the intimately mixed PdZn/ZrO2 and SAPO-34 components that shifts the overall reaction equilibrium, boosting CO2 conversion and minimizing CO selectivity. Comparison to a PdZn/ZrO2+ZSM-5 system showed that propane selectivity is further boosted by the topology of SAPO-34. The presence of Pd in the catalyst drives paraffin production via hydrogenation, with more than 99.9% of the products being saturated hydrocarbons, offering very important advantages for the purification of the products.

| S-EPMC8549042 | biostudies-literature

Directly converting CO2 into a gasoline fuel.

Project description:The direct production of liquid fuels from CO2 hydrogenation has attracted enormous interest for its significant roles in mitigating CO2 emissions and reducing dependence on petrochemicals. Here we report a highly efficient, stable and multifunctional Na-Fe3O4/HZSM-5 catalyst, which can directly convert CO2 to gasoline-range (C5-C11) hydrocarbons with selectivity up to 78% of all hydrocarbons while only 4% methane at a CO2 conversion of 22% under industrial relevant conditions. It is achieved by a multifunctional catalyst providing three types of active sites (Fe3O4, Fe5C2 and acid sites), which cooperatively catalyse a tandem reaction. More significantly, the appropriate proximity of three types of active sites plays a crucial role in the successive and synergetic catalytic conversion of CO2 to gasoline. The multifunctional catalyst, exhibiting a remarkable stability for 1,000 h on stream, definitely has the potential to be a promising industrial catalyst for CO2 utilization to liquid fuels.

| S-EPMC5418575 | biostudies-literature

CO2 Hydrogenation to Methanol over Cd4/TiO2 Catalyst: Insight into Multifunctional Interface.

Project description:Supported metal catalysts have shown to be efficient for CO2 conversion due to their multifunctionality and high stability. Herein, we have combined density functional theory calculations with microkinetic modeling to investigate the catalytic reaction mechanisms of CO2 hydrogenation to CH3OH over a recently reported catalyst of Cd4/TiO2. Calculations reveal that the metal-oxide interface is the active center for CO2 hydrogenation and methanol formation via the formate pathway dominates over the reverse water-gas shift (RWGS) pathway. Microkinetic modeling demonstrated that formate species on the surface of Cd4/TiO2 is the relevant intermediate for the production of CH3OH, and CH2O# formation is the rate-determining step. These findings demonstrate the crucial role of the Cd-TiO2 interface for controlling the CO2 reduction reactivity and CH3OH selectivity.

| S-EPMC9305886 | biostudies-literature

Designing Multifunctional Co and Fe Co-Doped MoS2 Nanocube Electrodes for Dye-Sensitized Solar Cells, Perovskite Solar Cells, and a Supercapacitor.

Project description:In the present study, three types of specific solid, core-shell, and hollow structured cobalt and iron co-doped MoS2 nanocubes (denoted as s-Co-Fe-MoS x , c-Co-Fe-MoS x , and h-Co-Fe-MoS x ) are controllably synthesized for the first time by regulating the reactant mass ratios. The prepared Co-Fe-MoS x nanocubes can function as a counter electrode in dye-sensitized and perovskite solar cells (DSCs and PSCs) and a working electrode in a supercapacitor. In the DSC system, the c-Co-Fe-MoS x nanocubes exhibit the maximum catalytic activity to the Co3+/2+ redox couple regeneration, and the device achieves a power conversion efficiency (PCE) of 8.69%, significantly higher than the devices using s-Co-Fe-MoS x (6.61%) and h-Co-Fe-MoS x (7.63%) counter electrodes. Similarly, all of the prepared Co-Fe-MoS x nanocubes show decent activity in PSCs and the device using the c-Co-Fe-MoS x counter electrode achieves the highest PCE of 6.88%. It is worth noting that, as the supercapacitor working electrode, the h-Co-Fe-MoS x exhibits a specific capacitance of 85.4 F g-1, significantly higher than the parallel values achieved by the s-Co-Fe-MoS x and c-Co-Fe-MoS x electrodes under identical conditions.

| S-EPMC8482514 | biostudies-literature

Strategic Utilization of Multifunctional Carbene for Direct Synthesis of Carboxylic-Phosphinic Mixed Anhydride from CO2.

Project description:Direct synthesis of carboxylic-phosphinic mixed anhydrides has been achieved by treating carbon dioxide with N-phosphine oxide-substituted imidazolylidenes (PoxIms) that contain both nucleophilic carbene and electrophilic phosphorus moieties. This novel mixed anhydride was efficiently derivatized into an ester, an amide, and an unsymmetrical ketone via transformation into its corresponding imidazolium salt followed by a dual substitution reaction. The presented work used well-designed multifunctional carbene reagents to establish a novel utility for carbon dioxide in organic synthesis.

| S-EPMC6680262 | biostudies-literature

Kinetic Model for the Direct Conversion of CO2/CO into Light Olefins over an In2O3-ZrO2/SAPO-34 Tandem Catalyst.

Project description:An original kinetic model is proposed for the direct production of light olefins by hydrogenation of CO2/CO (COx) mixtures over an In2O3-ZrO2/SAPO-34 tandem catalyst, quantifying deactivation by coke. The reaction network comprises 12 individual reactions, and deactivation is quantified with expressions dependent on the concentration of methanol (as coke precursor) and H2O and H2 (as agents attenuating coke formation). The experimental results were obtained in a fixed-bed reactor under the following conditions: In2O3-ZrO2/SAPO-34 mass ratio, 0/1-1/0; 350-425 °C; 20-50 bar; H2/COx ratio, 1-3; CO2/COx ratio, 0-1; space time, 0-10 gIn2O3-ZrO2 h molC-1, 0-20 gSAPO-34 h molC-1; time, up to 500 h; H2O and CH3OH in the feed, up to 5% vol. The utility of the model for further scale-up studies is demonstrated by its application in optimizing the process variables (temperature, pressure, and CO2/COx ratio). The model predicts an olefin yield higher than 7% (selectivity above 60%), a COx conversion of 12% and a CO2 conversion of 16% at 415 °C and 50 bar, for a CO2/COx = 0.5 in the feed. Additionally, an analysis of the effect of In2O3-ZrO2 and SAPO-34 loading in the configuration of the tandem catalyst is conducted, yielding 17% olefins and complete conversion of CO2 under full water removal conditions.

| S-EPMC10828986 | biostudies-literature

Ti3C2 MXene co-catalyst on metal sulfide photo-absorbers for enhanced visible-light photocatalytic hydrogen production.

Project description:Scalable and sustainable solar hydrogen production through photocatalytic water splitting requires highly active and stable earth-abundant co-catalysts to replace expensive and rare platinum. Here we employ density functional theory calculations to direct atomic-level exploration, design and fabrication of a MXene material, Ti3C2 nanoparticles, as a highly efficient co-catalyst. Ti3C2 nanoparticles are rationally integrated with cadmium sulfide via a hydrothermal strategy to induce a super high visible-light photocatalytic hydrogen production activity of 14,342??mol?h-1?g-1 and an apparent quantum efficiency of 40.1% at 420?nm. This high performance arises from the favourable Fermi level position, electrical conductivity and hydrogen evolution capacity of Ti3C2 nanoparticles. Furthermore, Ti3C2 nanoparticles also serve as an efficient co-catalyst on ZnS or ZnxCd1-xS. This work demonstrates the potential of earth-abundant MXene family materials to construct numerous high performance and low-cost photocatalysts/photoelectrodes.

| S-EPMC5512649 | biostudies-literature

Co3Mo3N-An efficient multifunctional electrocatalyst.

Project description:Efficient catalysts are required for both oxidative and reductive reactions of hydrogen and oxygen in sustainable energy conversion devices. However, current precious metal-based electrocatalysts do not perform well across the full range of reactions and reported multifunctional catalysts are all complex hybrids. Here, we show that single-phase porous Co3Mo3N prepared via a facile method is an efficient and reliable electrocatalyst for three essential energy conversion reactions; oxygen evolution reaction (OER), oxygen reduction reaction (ORR), and hydrogen evolution reaction (HER) in alkaline solutions. Co3Mo3N presents outstanding OER, ORR, and HER activity with high durability, comparable with the commercial catalysts RuO2 for OER and Pt/C for ORR and HER. In practical demonstrations, Co3Mo3N gives high specific capacity (850 mA h gZn -1 at 10 mA cm-2) as the cathode in a zinc-air battery, and a low potential (1.63 V at 10 mA cm-2) used in a water-splitting electrolyzer. Availability of Co and Mo d-states appear to result in high ORR and HER performance, while the OER properties result from a cobalt oxide-rich activation surface layer. Our findings will inspire further development of bimetallic nitrides as cost-effective and versatile multifunctional catalysts that will enable scalable usage of electrochemical energy devices.

| S-EPMC8454690 | biostudies-literature

Integrated Co-Electrolysis and Syngas Methanation for the Direct Production of Synthetic Natural Gas from CO2 and H2 O.

Project description:The concept of an integrated power-to-gas (P2G) process was demonstrated for renewable energy storage by converting renewable electrical energy to synthetic fuels. Such a dynamically integrated process enables direct production of synthetic natural gas (SNG) from CO2 and H2 O. The produced SNG can be stored or directly injected into the existing natural gas network. To study process integration, operating parameters of the high-temperature solid oxide electrolysis cell (SOEC) producing syngas (H2 +CO) mixtures through co-electrolysis and a fixed bed reactor for syngas methanation of such gas mixtures were first optimized individually. Reactor design, operating conditions, and enhanced SNG selectivity were the main targets of the study. SOEC experiments were performed on state-of-the-art button cells. Varying operating conditions (temperature, flow rate, gas mixture and current density) emphasized the capability of the system to produce tailor-made syngas mixtures for downstream methanation. Catalytic syngas methanation was performed using hydrotalcite-derived 20 %Ni-2 %Fe/(Mg,Al)Ox catalyst and commercial methanation catalyst (Ni/Al2 O3 ) as reference. Despite water in the feed mixture, SNG with high selectivity (≥90 %) was produced at 300 °C and atmospheric pressure. An adequate rate of syngas conversion was obtained with H2 O contents up to 30 %, decreasing significantly for 50 % H2 O in the feed. Compared to the commercial catalyst, 20 %Ni-2 %Fe/(Mg,Al)Ox enabled a higher rate of COx conversion.

| S-EPMC8252491 | biostudies-literature

Single PEDOT Catalyst Boosts CO2 Photoreduction Efficiency.

Project description:Atmospheric pollution demands the development of solar-driven photocatalytic technologies for the conversion of CO2 into a fuel; state-of-the-art cocatalyst systems demonstrate conversion efficiencies currently unattainable by a single catalyst. Here, we upend the status quo demonstrating that the nanofibrillar conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) is a record-breaking single catalyst for the photoreduction of CO2 to CO. This high catalytic efficiency stems from a highly conductive nanofibrillar structure that significantly enhances surface area, CO2 adsorption and light absorption. Moreover, the polymer's band gap is optimized via chemical doping/dedoping treatments using hydrochloric acid, ammonia hydroxide, and hydrazine. The hydrazine-treated PEDOT catalyst exhibits 100% CO yield under a stable regime (>10 h) with a maximum rate of CO evolution (3000 μmol gcat -1 h-1) that is 2 orders of magnitude higher than the top performing single catalyst and surpassed only by three other cocatalyst systems. Nanofibrillar PEDOT provides a new direction for designing the next generation of high-efficiency photoreduction catalysts.

| S-EPMC8554841 | biostudies-literature