Direct writing of customized structural-color graphics with colloidal photonic inks.
Ontology highlight
ABSTRACT:
SUBMITTER: Kim JB
PROVIDER: S-EPMC8612532 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:With the advent of direct laser writing using two-photon polymerization, the generation of high-resolution three-dimensional microstructures has increased dramatically. However, the development of stimuli-responsive photoresists to create four-dimensional (4D) microstructures remains a challenge. Herein, we present a supramolecular cholesteric liquid crystalline photonic photoresist for the fabrication of 4D photonic microactuators, such as pillars, flowers, and butterflies, with submicron resolution. These micron-sized features display structural color and shape changes triggered by a variation of humidity or temperature. These findings serve as a roadmap for the design and creation of high-resolution 4D photonic microactuators.
| S-EPMC7450659 | biostudies-literature
Project description:Using direct laser writing, arrays of optically responsive ionogel structures were fabricated. To demonstrate their responsive nature, visible colour changes in the presence of different solvent vapours were investigated. This represents a new departure for photonic structural colouration, in which the fabricating structure shows a programmable, controllable, and dynamic stimuli response.
| S-EPMC8444305 | biostudies-literature
Project description:Fabrication of macroporous polymers with functionally graded architecture or chemistry bears transformative potential in acoustic damping, energy storage materials, flexible electronics, and filtration but is hardly reachable with current processes. Here, we introduce thiol-ene chemistries in direct bubble writing, a recent technique for additive manufacturing of foams with locally controlled cell size, density, and macroscopic shape. Surfactant-free and solvent-free graded three-dimensional (3D) foams without drying-induced shrinkage were fabricated by direct bubble writing at an unparalleled ink viscosity of 410 cP (40 times higher than previous formulations). Functionalities including shape memory, high glass transition temperatures (>25 °C), and chemical gradients were demonstrated. These results extend direct bubble writing from aqueous inks to nonaqueous formulations at high liquid flow rates (3 mL min-1). Altogether, direct bubble writing with thiol-ene inks promises rapid one-step fabrication of functional materials with locally controlled gradients in the chemical, mechanical, and architectural domains.
| S-EPMC7503514 | biostudies-literature
Project description:Non-iridescent structural colors based on disordered arrangement of monodisperse spherical particles, also called photonic glass, show low color saturation due to gradual transition in the reflectivity spectrum. No significant improvement is usually expected from particles optimization, as Mie resonances are broad for small dielectric particles with moderate refractive index. Moreover, the short range order of a photonic glass alone is also insufficient to cause sharp spectral features. We show here, that the combination of a well-chosen particle geometry with the short range order of a photonic glass has strong synergetic effects. Using a first-order approximation and an Ewald sphere construction the reflectivity of such structures can be related to the Fourier transform of the permittivity distribution. The Fourier transform required for a highly saturated color can be achieved by tailoring the substructure of the motif. We show that this can be obtained by choosing core-shell particles with a non-monotonous refractive index distribution from the center of the particle through the shell and into the background material. The first-order theoretical predictions are confirmed by numerical simulations.
| S-EPMC5958089 | biostudies-other
Project description:Structural color materials have been studied for decades because of their fascinating properties. Effects in this area are the trend to develop functional structural color materials with new components, structures, or morphologies for different applications. In this study, we found that the coassembled graphene oxide (GO) and colloid nanoparticles in droplets could form component phase separations, and thus, previously unknown anisotropic structural color particles (SCPs) with hemispherical colloidal crystal cluster and oblate GO component could be achieved. The anisotropic SCPs, as well as their inverse opal hydrogel derivatives, were endowed with brilliant structural colors and controllable capabilities of fixation, location, orientation, and even responsiveness due to their specific structure, morphology, and components. We have also demonstrated that the anisotropic hydrogel SCPs with these features were ideal candidates for dynamic cell monitoring and sensing. These properties indicate that the anisotropic SCPs and their derivatives have huge potential values in biomedical areas.
| S-EPMC6954063 | biostudies-literature
Project description:The coloration of some butterflies, Pachyrhynchus weevils, and many chameleons are notable examples of natural organisms employing photonic crystals to produce colorful patterns. Despite advances in nanotechnology, we still lack the ability to print arbitrary colors and shapes in all three dimensions at this microscopic length scale. Here, we introduce a heat-shrinking method to produce 3D-printed photonic crystals with a 5x reduction in lattice constants, achieving sub-100-nm features with a full range of colors. With these lattice structures as 3D color volumetric elements, we printed 3D microscopic scale objects, including the first multi-color microscopic model of the Eiffel Tower measuring only 39 µm tall with a color pixel size of 1.45 µm. The technology to print 3D structures in color at the microscopic scale promises the direct patterning and integration of spectrally selective devices, such as photonic crystal-based color filters, onto free-form optical elements and curved surfaces.
| S-EPMC6761189 | biostudies-literature
Project description:We report on the fabrication of desired magneto-photonic devices by a low one-photon absorption (LOPA) direct laser writing (DLW) technique on a photocurable nanocomposite consisting of magnetite ( Fe 3 O 4 ) nanoparticles and a commercial SU-8 photoresist. The magnetic nanocomposite was synthesized by mixing Fe 3 O 4 nanoparticles with different kinds of SU-8 photoresists. We demonstrated that the degree of dispersion of Fe 3 O 4 nanoparticles in the nanocomposite depended on the concentration of Fe 3 O 4 nanoparticles, the viscosity of SU-8 resist, and the mixing time. By tuning these parameters, the most homogeneous magnetic nanocomposite was obtained with a concentration of about 2 wt % of Fe 3 O 4 nanoparticles in SU-8 2005 photoresist for the mixing time of 20 days. The LOPA-based DLW technique was employed to fabricate on demand various magneto-photonic submicrometer structures, which are similar to those obtained without Fe 3 O 4 nanoparticles. The magneto-photonic 2D and 3D structures with sizes as small as 150 nm were created. We demonstrated the strong magnetic field responses of the magneto-photonic nanostructures and their use as micro-actuators when immersed in a liquid solution.
| S-EPMC5449986 | biostudies-literature
Project description:The beautiful structural colors in bird feathers are some of the brightest colors in nature, and some of these colors are created by arrays of melanin granules that act as both structural colors and scattering absorbers. Inspired by the color of bird feathers, high-visibility structural colors have been created by altering four variables: size, blackness, refractive index, and arrangement of the nano-elements. To control these four variables, we developed a facile method for the preparation of biomimetic core-shell particles with melanin-like polydopamine (PDA) shell layers. The size of the core-shell particles was controlled by adjusting the core polystyrene (PSt) particles' diameter and the PDA shell thicknesses. The blackness and refractive index of the colloidal particles could be adjusted by controlling the thickness of the PDA shell. The arrangement of the particles was controlled by adjusting the surface roughness of the core-shell particles. This method enabled the production of both iridescent and non-iridescent structural colors from only one component. This simple and novel process of using core-shell particles containing PDA shell layers can be used in basic research on structural colors in nature and their practical applications.
| S-EPMC5034286 | biostudies-literature
Project description:The incorporation of structural color into 3D printed parts is reported, presenting an alternative to the need for pigments or dyes for colored parts produced through additive manufacturing. Thermoplastic build materials composed of dendritic block copolymers were designed, synthesized, and used to additively manufacture plastic parts exhibiting structural color. The reflection properties of the photonic crystals arise from the periodic nanostructure formed through block copolymer self-assembly during polymer processing. The wavelength of reflected light could be tuned across the visible spectrum by synthetically controlling the block copolymer molecular weight and manufacture parts that reflected violet, green, or orange light with the capacity to serve as selective optical filters and light guides.
| S-EPMC5485652 | biostudies-literature
Project description:Surface ligands enable control over the dispersibility of colloidal quantum dots (CQDs) via steric and electrostatic stabilization. Today's device-grade CQD inks have consistently relied on highly polar solvents: this enables facile single-step deposition of multi-hundred-nanometer-thick CQD films; but it prevents the realization of CQD film stacks made up of CQDs having different compositions, since polar solvents redisperse underlying films. Here we introduce aromatic ligands to achieve process-orthogonal CQD inks, and enable thereby multifunctional multilayer CQD solids. We explore the effect of the anchoring group of the aromatic ligand on the solubility of CQD inks in weakly-polar solvents, and find that a judicious selection of the anchoring group induces a dipole that provides additional CQD-solvent interactions. This enables colloidal stability without relying on bulky insulating ligands. We showcase the benefit of this ink as the hole transport layer in CQD optoelectronics, achieving an external quantum efficiency of 84% at 1210 nm.
| S-EPMC7511352 | biostudies-literature