Cost-effective surveillance of invasive species using info-gap theory.
Ontology highlight
ABSTRACT:
SUBMITTER: Liu Y
PROVIDER: S-EPMC8613277 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Environmental DNA (eDNA) metabarcoding has revolutionized biodiversity monitoring and invasive pest biosurveillance programs. The introduction of insect pests considered invasive alien species (IAS) into a non-native range poses a threat to native plant health. The early detection of IAS can allow for prompt actions by regulating authorities, thereby mitigating their impacts. In the present study, we optimized and validated a fast and cost-effective eDNA metabarcoding protocol for biosurveillance of IAS and characterization of insect and microorganism diversity. Forty-eight traps were placed, following the CFIA's annual forest insect trapping survey, at four locations in southern Ontario that are high risk for forest IAS. We collected insects and eDNA samples using Lindgren funnel traps that contained a saturated salt (NaCl) solution in the collection jar. Using cytochrome c oxidase I (COI) as a molecular marker, a modified Illumina protocol effectively identified 2,535 Barcode Index Numbers (BINs). BINs were distributed among 57 Orders and 304 Families, with the vast majority being arthropods. Two IAS (Agrilus planipennis and Lymantria dispar) are regulated by the Canadian Food Inspection Agency (CFIA) as plant health pests, are known to occur in the study area, and were identified through eDNA in collected traps. Similarly, using 16S ribosomal RNA and nuclear ribosomal internal transcribed spacer (ITS), five bacterial and three fungal genera, which contain species of regulatory concern across several Canadian jurisdictions, were recovered from all sampling locations. Our study results reaffirm the effectiveness and importance of integrating eDNA metabarcoding as part of identification protocols in biosurveillance programs.
| S-EPMC7920766 | biostudies-literature
Project description:Clinical audit of invasive mold disease (IMD) in hematology patients is inefficient due to the difficulties of case finding. This results in antifungal stewardship (AFS) programs preferentially reporting drug cost and consumption rather than measures that actually reflect quality of care. We used machine learning-based natural language processing (NLP) to non-selectively screen chest tomography (CT) reports for pulmonary IMD, verified by clinical review against international definitions and benchmarked against key AFS measures. NLP screened 3014 reports from 1 September 2008 to 31 December 2017, generating 784 positives that after review, identified 205 IMD episodes (44% probable-proven) in 185 patients from 50,303 admissions. Breakthrough-probable/proven-IMD on antifungal prophylaxis accounted for 60% of episodes with serum monitoring of voriconazole or posaconazole in the 2 weeks prior performed in only 53% and 69% of episodes, respectively. Fiberoptic bronchoscopy within 2 days of CT scan occurred in only 54% of episodes. The average turnaround of send-away bronchoalveolar galactomannan of 12 days (range 7-22) was associated with high empiric liposomal amphotericin consumption. A random audit of 10% negative reports revealed two clinically significant misses (0.9%, 2/223). This is the first successful use of applied machine learning for institutional IMD surveillance across an entire hematology population describing process and outcome measures relevant to AFS. Compared to current methods of clinical audit, semi-automated surveillance using NLP is more efficient and inclusive by avoiding restrictions based on any underlying hematologic condition, and has the added advantage of being potentially scalable.
| S-EPMC6780614 | biostudies-literature
Project description:Millions of people die each year as a result of pathogens transmitted by mosquitoes. However, the morphological identification of mosquito species can be difficult even for experts. The identification of morphologically indistinguishable species, such as members of the Anopheles maculipennis complex (Diptera: Culicidae), and possible hybrids, such as Culex pipiens pipiens/Culex pipiens molestus (Diptera: Culicidae), presents a major problem. In addition, the detection and discrimination of newly introduced species can be challenging, particularly to researchers without previous experience. Because of their medical importance, the clear identification of all relevant mosquito species is essential. Using the direct polymerase chain reaction (PCR) method described here, DNA amplification without prior DNA extraction is possible and thus species identification after sequencing can be achieved. Different amounts of tissue (leg, head; larvae or adult) as well as different storage conditions (dry, ethanol, -20 and -80 °C) and storage times were successfully applied and showed positive results after amplification and gel electrophoresis. Overall, 28 different indigenous and non-indigenous mosquito species were analysed using a gene fragment of the COX1 gene for species differentiation and identification by sequencing this 658-bp fragment. Compared with standard PCR, this method is time- and cost-effective and could thus improve existing surveillance and control programmes.
| S-EPMC4982094 | biostudies-literature
Project description:Invasive species can spread rapidly at local and national scales, creating significant environmental and economic impacts. A central problem in mitigation efforts is identifying methods that can rapidly detect invasive species in a cost-effective and repeatable manner. This challenge is particularly acute for species that can spread over large areas (>1 million km2). Wild pigs (Sus scrofa) are one of the most prolific invasive mammals on Earth and cause extensive damage to agricultural crops, native ecosystems, and livestock, and are reservoirs of disease. They have spread from their native range in Eurasia and North Africa into large areas of Australia, Africa, South America, and North America. We show that the range of invasive wild pigs has increased exponentially in Canada over the last 27 years following initial and ongoing releases and escapes from domestic wild boar farms. The cumulative range of wild pigs across Canada is 777,783 km2, with the majority of wild pig distribution occurring in the Prairie Provinces. We evaluate eight different data collection and evaluation/validation methods for mapping invasive species over large areas, and assess their benefits and limitations. Our findings effectively map the spread of a highly invasive large mammal and demonstrate that management efforts should ideally rely on a set of complementary independent monitoring methods. Mapping and evaluating resulting species occurrences provide baseline maps against which future changes can be rapidly evaluated.
| S-EPMC6510748 | biostudies-literature
Project description:BACKGROUND:Vector surveillance provides critical data for decision-making to ensure that malaria control programmes remain effective and responsive to any threats to a successful control and elimination programme. The quality and quantity of data collected is dependent on the sampling tools and laboratory techniques used which may lack the sensitivity required to collect relevant data for decision-making. Here, 40 vector control experts were interviewed to assess the benefits and limitations of the current vector surveillance tools and techniques. In addition, experts shared ideas on "blue sky" indicators which encompassed ideas for novel methods to monitor presently used indicators, or to measure novel vector behaviours not presently measured. Algorithms for deploying surveillance tools and priorities for understanding vector behaviours are also needed for collecting and interpreting vector data. RESULTS:The available tools for sampling and analysing vectors are often hampered by high labour and resource requirements (human and supplies) coupled with high outlay and operating costs and variable tool performance across species and geographic regions. The next generation of surveillance tools needs to address the limitations of present tools by being more sensitive, specific and less costly to deploy to enable the collection and use of epidemiologically relevant vector data to facilitate more proactive vector control guidance. Ideas and attributes for Target Product Profiles (TPPs) generated from this analysis provide targets for research and funding to develop next generation tools. CONCLUSIONS:More efficient surveillance tools and a more complete understanding of vector behaviours and populations will provide a basis for more cost effective and successful malaria control. Understanding the vectors' behaviours will allow interventions to be deployed that target vulnerabilities in vector behaviours and thus enable more effective control. Through defining the strengths and weaknesses of the current vector surveillance methods, a foundation and initial framework was provided to define the TPPs for the next generation of vector surveillance methods. The draft TTPs presented here aim to ensure that the next generation tools and technologies are not encumbered by the limitations of present surveillance methods and can be readily deployed in low resource settings.
| S-EPMC7687713 | biostudies-literature
Project description:Background: Genetic and genomic selection programs require large numbers of phenotypes observed for animals in shared environments. Direct measurements of phenotypes like meat quality, methane emission, and disease susceptibility are difficult and expensive to measure at scale but are critically important to livestock production. Our work leans on our understanding of the “Central Dogma” of molecular genetics to leverage molecular intermediates as cheaply-measured proxies of organism-level phenotypes. The rapidly declining cost of next-generation sequencing presents opportunities for population-level molecular phenotyping. While the cost of whole transcriptome sequencing has declined recently, its required sequencing depth still makes it an expensive choice for wide-scale molecular phenotyping. We aim to optimize 3′ mRNA sequencing (3′ mRNA-Seq) approaches for collecting cost-effective proxy molecular phenotypes for cattle from easy-to-collect tissue samples (i.e., whole blood). We used matched 3′ mRNA-Seq samples for 15 Holstein male calves in a heat stress trail to identify the 1) best library preparation kit (Takara SMART-Seq v4 3′ DE and Lexogen QuantSeq) and 2) optimal sequencing depth (0.5 to 20 million reads/sample) to capture gene expression phenotypes most cost-effectively. Results: Takara SMART-Seq v4 3′ DE outperformed Lexogen QuantSeq libraries across all metrics: number of quality reads, expressed genes, informative genes, differentially expressed genes, and 3′ biased intragenic variants. Serial downsampling analyses identified that as few as 8.0 million reads per sample could effectively capture most of the between-sample variation in gene expression. However, progressively more reads did provide marginal increases in recall across metrics. These 3′ mRNA-Seq reads can also capture animal genotypes that could be used as the basis for downstream imputation. The 10 million read downsampled groups called an average of 104,386 SNPs and 20,131 INDELs, many of which segregate at moderate minor allele frequencies in the population. Conclusion: This work demonstrates that 3′ mRNA-Seq with Takara SMART-Seq v4 3′ DE can provide an incredibly cost-effective (<$25/sample) approach to quantifying molecular phenotypes (gene expression) while discovering sufficient variation for use in genotype imputation. Ongoing work is evaluating the accuracy of imputation and the ability of much larger datasets to predict individual animal phenotypes.
2024-07-22 | GSE272596 | GEO
Project description:Effective vector and arbovirus surveillance requires timely and accurate screening techniques that can be easily upscaled. Next-generation sequencing (NGS) is a high-throughput technology that has the potential to modernize vector surveillance. When combined with DNA barcoding, it is termed 'metabarcoding.' The aim of our study was to establish a metabarcoding protocol to characterize pools of mosquitoes and screen them for virus. Pools contained 100 morphologically identified individuals, including one Ross River virus (RRV) infected mosquito, with three species present at different proportions: 1, 5, 94%. Nucleic acid extracted from both crude homogenate and supernatant was used to amplify a 269-bp section of the mitochondrial cytochrome c oxidase subunit I (COI) locus. Additionally, a 67-bp region of the RRV E2 gene was amplified from synthesized cDNA to screen for RRV. Amplicon sequencing was performed using an Illumina MiSeq, and bioinformatic analysis was performed using a DNA barcode database of Victorian mosquitoes. Metabarcoding successfully detected all mosquito species and RRV in every positive sample tested. The limits of species detection were also examined by screening a pool of 1000 individuals, successfully identifying the species and RRV from a single mosquito. The primers used for amplification, number of PCR cycles and total number of individuals present all have effects on the quantification of species in mixed bulk samples. Based on the results, a number of recommendations for future metabarcoding studies are presented. Overall, metabarcoding shows great promise for providing a new alternative approach to screening large insect surveillance trap catches.
| S-EPMC5811807 | biostudies-literature
Project description:BACKGROUND: Invasive aedine mosquito species have become a major issue in many parts of the world as most of them are recognised vectors or potentially involved in transmission of pathogens. Surveillance of these mosquitoes (e.g. Ae. aegypti, Yellow fever mosquito, Aedes albopictus, Asian tiger mosquito) is mainly done by collecting eggs using ovitraps and by identification of the larvae hatched in the laboratory. In order to replace this challenging and laborious procedure, we have evaluated matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF MS) for easy and rapid species identification. METHODS: Individual protein profiles were generated using five eggs each of nine aedine species (Ae. aegypti, Ae. albopictus, Ae. atropalpus, Ae. cretinus, Ae. geniculatus, Ae. japonicus, Ae. koreicus, Ae. phoeniciae, Ae. triseriatus) from various geographical origins, and species-specific biomarker mass sets could be generated. A blinded validation using our reference data base for automated egg identification was performed. In addition, pools of 10 aedine eggs (132 two-species and 18 three-species pools) in different ratios were evaluated. RESULTS: Specific biomarker mass sets comprising 18 marker masses could be generated for eggs of nine container-inhabiting aedine species, including all the major invasive and indigenous species of Europe and North America. Two additional masses shared by all investigated aedine species are used as internal calibrators. Identification of single eggs was highly accurate (100% specificity, 98.75% sensitivity), and this method is also of value for the identification of species in pools of ten eggs. When mixing two or three species, all were identified in all pools in at least 2 or 1 of the 4 loaded replicates, respectively, if the "lesser abundant" species in the pool accounted for three or more eggs. CONCLUSIONS: MALDI-TOF MS, which is widely applied for routine identification of microorganisms in clinical microbiology laboratories, is also suited for robust, low-cost and high throughput identification of mosquito vectors in surveillance programmes. This tool can further be developed to include a wide spectrum of arthropods but also other Metazoa for which surveillance is required, and might become the method of choice for their centralised identification via online platforms.
| S-EPMC4022357 | biostudies-literature
Project description:Routine testing for SARS-CoV-2 is rare for institutes of higher education due to prohibitive costs and supply chain delays. During spring 2021, we routinely tested all residential students 1 to 2 times per week using pooled, RNA-extraction-free, reverse transcription quantitative PCR (RT-qPCR) testing of saliva at a cost of $0.43/sample with same-day results. The limit of detection was 500 copies/ml on individual samples, and analysis indicates 1,000 and 2,500 copies/ml in pools of 5 and 10, respectively, which is orders of magnitude more sensitive than rapid antigen tests. Importantly, saliva testing flagged 83% of semester positives (43,884 tests administered) and was 95.6% concordant with nasopharyngeal diagnostic results (69.0% concordant on the first test when the nucleocapsid gene (N1) cycle threshold (CT) value was >30). Moreover, testing reduced weekly cases by 59.9% in the spring despite far looser restrictions, allowing for more normalcy while eliminating outbreaks. We also coupled our testing with a survey to clarify symptoms and transmissibility among college-age students. While only 8.5% remained asymptomatic throughout, symptoms were disparate and often cold-like (e.g., only 37.3% developed a fever), highlighting the difficulty with relying on symptom monitoring among this demographic. Based on reported symptom progression, we estimate that we removed 348 days of infectious individuals by routine testing. Interestingly, viral load (CT value) at the time of testing did not affect transmissibility (R2 = 0.0085), though those experiencing noticeable symptoms at the time of testing were more likely to spread the virus to close contacts (31.6% versus 14.3%). Together, our findings support routine testing for reducing the spread of SARS-CoV-2. Implementation of cost- and resource-efficient approaches should receive strong consideration in communities that lack herd immunity. IMPORTANCE This study highlights the utility of routine testing for SARS-CoV-2 using pooled saliva while maintaining high sensitivity of detection (under 2,500 copies/ml) and rapid turnaround of high volume (up to 930 samples in 8 h by two technicians and one quantitative PCR [qPCR] machine). This pooled approach allowed us to test all residential students 1 to 2 times per week on our college campus during the spring of 2021 and flagged 83% of our semester positives. Most students were asymptomatic or presented with symptoms mirroring common colds at the time of testing, allowing for removal of infectious individuals before they otherwise would have sought testing. To our knowledge, the total per-sample consumable cost of $0.43 is the lowest to date. With many communities still lagging in vaccination rates, routine testing that is cost-efficient highlights the capacity of the laboratory's role in controlling the spread of SARS-CoV-2.
| S-EPMC8515933 | biostudies-literature
Project description:Advances in single-cell genomics enable commensurate improvements in methods for uncovering lineage relations among individual cells. Current sequencing based methods for cell lineage analysis depend on low resolution bulk analysis or rely on extensive single cell sequencing which is not scalable and could be biased by functional dependencies. Here we show an integrated biochemical-computational platform for generic single-cell lineage analysis that is retrospective, cost-effective and scalable. It consists of a biochemical-computational pipeline that inputs individual cells, produces targeted single-cell sequencing data and uses it to generate a lineage tree of the input cells. We validated the platform by applying it to cells sampled from an ex vivo grown tree and analyzed its feasibility landscape by computer simulations. We conclude that the platform may serve as a generic tool for lineage analysis and thus pave the way towards large-scale human cell lineage discovery.
2016-04-18 | E-MTAB-4553 | biostudies-arrayexpress