Dataset Information

Assessment of saliva interference with UV-based disinfection technologies.

ABSTRACT: Worldwide shortages of personal protective equipment during COVID-19 pandemic has forced the implementation of methods for decontaminating face piece respirators such as N95 respirators. The use of UV irradiation to reduce bioburden of used respirators attracts attention, making proper testing protocols of uttermost importance. Currently artificial saliva is used but its comparison to human saliva from the UV disinfection perspective is lacking. Here we characterize UV spectra of human and artificial saliva, both fresh and after settling, to test for possible interference for UV-based disinfection. ASTM 2720 artificial saliva recipe (with either porcine or bovine mucin) showed many discrepancies from average (N = 18) human saliva, with different mucins demonstrating very different UV absorbance spectra, resulting in very different UV transmittance at different wavelength. Reducing porcine mucin concentration from 3 to 1.7 g/L brought UVA₂₅₄ in the artificial saliva to that of average human saliva (although not for other wavelengths), allowing 254 nm disinfection experiments. Phosphate saline and modified artificial saliva were spiked with 8.6 log CFU/ml B. subtilis spores (ATCC 6633) and irradiated at dose of up to 100 mJ/cm², resulting in 5.9 log inactivation for a saline suspension, and 2.8 and 1.1 log inactivation for ASTM-no mucin and ASTM-1.7 g/L porcine mucin 2 μL dried droplets, respectively. UVC irradiation of spores dried in human saliva resulted in 2.3 and 1.5 log inactivation, depending on the size of the droplets (2 vs 10 μL, respectively) dried on a glass surface. Our results suggest that in the presence of the current standard dried artificial saliva it is unlikely that UVC can achieve 6 log inactivation of B. subtilis spores using a realistic UV dose (e.g. less than 2 J/cm²) and the ATSM saliva recipe should be revised for UV decontamination studies.

SUBMITTER: Barancheshme F

PROVIDER: S-EPMC8614578 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Similar Datasets

Project description:The importance of infection control procedures in hospital radiology departments has become increasingly apparent in recent months as the impact of COVID-19 has spread across the world. Existing disinfectant procedures that rely on the manual application of chemical-based disinfectants are time consuming, resource intensive and prone to high degrees of human error. Alternative non-touch disinfection methods, such as Ultraviolet Germicidal Irradiation (UVGI), have the potential to overcome many of the limitations of existing approaches while significantly improving workflow and equipment utilization. The aim of this research was to investigate the germicidal effectiveness and the practical feasibility of using a robotic UVGI device for disinfecting surfaces in a radiology setting. We present the design of a robotic UVGI platform that can be deployed alongside human workers and can operate autonomously within cramped rooms, thereby addressing two important requirements necessary for integrating the technology within radiology settings. In one hospital, we conducted experiments in a CT and X-ray room. In a second hospital, we investigated the germicidal performance of the robot when deployed to disinfect a CT room in <15 minutes, a period which is estimated to be 2-4 times faster than current practice for disinfecting rooms after infectious (or potentially infectious) patients. Findings from both test sites show that UVGI successfully inactivated all of measurable microbial load on 22 out of 24 surfaces. On the remaining two surfaces, UVGI reduced the microbial load by 84 and 95%, respectively. The study also exposes some of the challenges of manually disinfecting radiology suites, revealing high concentrations of microbial load in hard-to-reach places. Our findings provide compelling evidence that UVGI can effectively inactivate microbes on commonly touched surfaces in radiology suites, even if they were only exposed to relatively short bursts of irradiation. Despite the short irradiation period, we demonstrated the ability to inactivate microbes with more complex cell structures and requiring higher UV inactivation energies than SARS-CoV-2, thus indicating high likelihood of effectiveness against coronavirus.

Project description:Experts agree that careful cleaning and disinfection of environmental surfaces are essential elements of effective infection prevention programs. However, traditional manual cleaning and disinfection practices in hospitals are often suboptimal. This is often due in part to a variety of personnel issues that many Environmental Services departments encounter. Failure to follow manufacturer's recommendations for disinfectant use and lack of antimicrobial activity of some disinfectants against healthcare-associated pathogens may also affect the efficacy of disinfection practices. Improved hydrogen peroxide-based liquid surface disinfectants and a combination product containing peracetic acid and hydrogen peroxide are effective alternatives to disinfectants currently in widespread use, and electrolyzed water (hypochlorous acid) and cold atmospheric pressure plasma show potential for use in hospitals. Creating "self-disinfecting" surfaces by coating medical equipment with metals such as copper or silver, or applying liquid compounds that have persistent antimicrobial activity surfaces are additional strategies that require further investigation. Newer "no-touch" (automated) decontamination technologies include aerosol and vaporized hydrogen peroxide, mobile devices that emit continuous ultraviolet (UV-C) light, a pulsed-xenon UV light system, and use of high-intensity narrow-spectrum (405 nm) light. These "no-touch" technologies have been shown to reduce bacterial contamination of surfaces. A micro-condensation hydrogen peroxide system has been associated in multiple studies with reductions in healthcare-associated colonization or infection, while there is more limited evidence of infection reduction by the pulsed-xenon system. A recently completed prospective, randomized controlled trial of continuous UV-C light should help determine the extent to which this technology can reduce healthcare-associated colonization and infections. In conclusion, continued efforts to improve traditional manual disinfection of surfaces are needed. In addition, Environmental Services departments should consider the use of newer disinfectants and no-touch decontamination technologies to improve disinfection of surfaces in healthcare.

Dataset Information

Assessment of saliva interference with UV-based disinfection technologies.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets