Cellulose-Silver Composites Materials: Preparation and Applications.
Ontology highlight
ABSTRACT:
SUBMITTER: Salama A
PROVIDER: S-EPMC8615592 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Composite films and aerogels of polyvinylpyrrolidone/cellulose nanocrystals (PVP/CNC) were prepared by solution casting and freeze-drying, respectively. Investigations into the PVP/CNC composite films and aerogels over a wide composition range were conducted. Thermal stability, morphology, and the resulting reinforcing effect on the PVP matrix were explored. FTIR, TGA, DSC, X-ray diffraction, SEM, and tensile testing were used to examine the properties of the composites. It was revealed PVP-assisted CNC self-assembly that produces uniform CNC aggregates with a high aspect ratio (length/width). A possible model of the PVP-assisted CNC self-assembly has been considered. Dispersibility of the composite aerogels in water and some organic solvents was studied. It was shown that dispersing the composite aerogels in water resulted in stable colloidal suspensions. CNC particles size in the redispersed aqueous suspensions was near similar to the CNC particles size in never-dried CNC aqueous suspensions.
| S-EPMC6315985 | biostudies-literature
Project description:Recent studies have highlighted an innovative way to produce highly porous materials based on cellulose fibers. These studies have focused on the foam-forming process, where the cellulose fibers and other components are mixed with foam. In the authors' previous research, the foam-formed cellulose materials (FCM) were obtained by mixing a surfactant with cellulose fibers, taken from virgin pulp and recovered papers. In the present paper, the authors performed additional experimental and computational analyses in order to evaluate the sound insulation capabilities of these FCM beyond the initial impedance of tube investigations. The poroacoustics computational methodology parameters-i.e., airflow resistivity, porosity, tortuosity, viscous, and thermal characteristic lengths-were herein evaluated. This analysis was performed using both a theoretical/empirical approach from the specialized literature and an experimental investigation developed by the authors. The computational investigations were conducted in two stages: First, we evaluated the approximation of the experimentally gained normal incidence parameters, in terms of absorption and reflection, respectively, relative to the estimated ones. The second stage of analysis consists of a parametrical estimation of sound insulation characteristics concerning the incidence angle of sound hitting the porous layer. The results presented in this paper are in agreement with the computational experimental results, providing extended soundproof characteristics to the incidence angle of the acoustic field. Further, this study supplies additional information useful for future analyses regarding the influences of random geometry air inclusions into the FCM layer.
| S-EPMC6680988 | biostudies-literature
Project description:The food packaging industry explores economically viable, environmentally benign, and non-toxic packaging materials. Biopolymers, including chitosan (CH) and gelatin (GE), are considered a leading replacement for plastic packaging materials, with preferred packaging functionality and biodegradability. CH, GE, and different proportions of silver nanoparticles (AgNPs) are used to prepare novel packaging materials using a simple solution casting method. The functional and morphological characterization of the prepared films was carried out by using Fourier transform infrared spectroscopy (FTIR), UV-Visible spectroscopy, and scanning electron microscopy (SEM). The mechanical strength, solubility, water vapor transmission rate, swelling behavior, moisture retention capability, and biodegradability of composite films were evaluated. The addition of AgNPs to the polymer blend matrix improves the physicochemical and biological functioning of the matrix. Due to the cross-linking motion of AgNPs, it is found that the swelling degree, moisture retention capability, and water vapor transmission rate slightly decrease. The tensile strength of pure CH-GE films was 24.4 ± 0.03, and it increased to 25.8 ± 0.05 MPa upon the addition of 0.0075% of AgNPs. The real-time application of the films was tested by evaluating the shelf-life existence of carrot pieces covered with the composite films. The composite film containing AgNPs becomes effective in lowering bacterial contamination while comparing the plastic polyethylene films. In principle, the synthesized composite films possessed all the ideal characteristics of packaging material and were considered biodegradable and biocompatible food packaging material and an alternate option for petroleum-based plastics.
| S-EPMC8196760 | biostudies-literature
Project description:This paper reports on the preparation of cellulose/reduced graphene oxide (rGO) aerogels for use as chemical vapour sensors. Cellulose/rGO composite aerogels were prepared by dissolving cellulose and dispersing graphene oxide (GO) in aqueous NaOH/urea solution, followed by an in-situ reduction of GO to reduced GO (rGO) and lyophilisation. The vapour sensing properties of cellulose/rGO composite aerogels were investigated by measuring the change in electrical resistance during cyclic exposure to vapours with varying solubility parameters, namely water, methanol, ethanol, acetone, toluene, tetrahydrofuran (THF), and chloroform. The increase in resistance of aerogels on exposure to vapours is in the range of 7 to 40% with methanol giving the highest response. The sensing signal increases almost linearly with the vapour concentration, as tested for methanol. The resistance changes are caused by the destruction of the conductive filler network due to a combination of swelling of the cellulose matrix and adsorption of vapour molecules on the filler surfaces. This combined mechanism leads to an increased sensing response with increasing conductive filler content. Overall, fast reaction, good reproducibility, high sensitivity, and good differentiation ability between different vapours characterize the detection behaviour of the aerogels.
| S-EPMC7560231 | biostudies-literature
Project description:The development of organic-inorganic hybrid materials deserves special interest for bone tissue engineering applications, where materials must have properties that induce the survival and activation of cells derived from the mesenchyme. In this work, four bio-nanocomposites based on cellulose and variable content of chitosan, from 15 to 50 w% based on cellulose, with nanohydroxyapatite and β-Glycerophosphate as cross-linking agent were synthesized by simplified and low-energy-demanding solvent exchange method to determine the best ratio of chitosan to cellulose matrix. This study analyzes the metabolic activity and survival of human dermal fibroblast cells cultivated in four bio-nanocomposites based on cellulose and the variable content of chitosan. The biocompatibility was tested by the in vitro cytotoxicity assays Live/Dead and PrestoBlue. In addition, the composites were characterized by FTIR, XRD and SEM. The results have shown that the vibration bands of β-Glycerophosphate have prevailed over the other components bands, while new diffraction planes have emerged from the interaction between the cross-linking agent and the biopolymers. The bio-nanocomposite micrographs have shown no surface porosity as purposely designed. On the other hand, cell death and detachment were observed when the composites of 1 and 0.1 w/v% were used. However, the composite containing 10 w% chitosan, against the sum of cellulose and β-Glycerophosphate, has shown less cell death and detachment when used at 0.01 w/v%, making it suitable for more in vitro studies in bone tissue engineering, as a promising economical biomaterial.
| S-EPMC8161035 | biostudies-literature
Project description:Electrospinning is a widely used technology for obtaining nanofibers from synthetic and natural polymers. In this study, electrospun mats from collagen (C), polyethylene terephthalate (PET) and a blend of the two (C-PET) were prepared and stabilized through a cross-linking process. The aim of this research was to prepare and characterize the nanofiber structure by Fourier-transform infrared with attenuated total reflectance spectroscopy (FTIR-ATR) in close correlation with dynamic vapor sorption (DVS). The studies indicated that C-PET nanofibrous mats shows improved mechanical properties compared to collagen samples. A correlation between morphological, structural and cytotoxic proprieties of the studied samples were emphasized and the results suggest that the prepared nanofiber mats could be a promising candidate for tissue-engineering applications, especially dermal applications.
| S-EPMC7559754 | biostudies-literature
Project description:Bacterial cellulose (BC) functionalized with silver nanoparticles (AgNPs) is evaluated as an antimicrobial membrane for wound-healing treatment. A facile green synthesis of silver nanoparticles inside the porous three-dimensional weblike BC network has been obtained by UV light irradiation. AgNPs were photochemically deposited onto the BC gel network as well as they were chemically bonded to the cellulose fiber surfaces. AgNPs with a narrow size distribution along with some aggregates in the BC network were evidenced from the morphological analyses. A highly crystalline nature of the BC membranes was observed in X-ray diffraction measurements, and the presence of metallic silver confirmed the photochemical reduction of Ag+ → Ag0 in Ag/BC composites. Antibacterial activity of the hybrid composites, such as pellicles, performed against the Gram-negative bacteria (Escherichia coli) by disk diffusion and growth dynamics methods showed high bacteria-killing performance. No significant amount of silver release was observed from the Ag/BC pellicles even after a long soaking time. As composite pellicles are preserved in a moist environment that also favors wound recovery, by combining all of these properties the material could be useful in wound-healing treatments.
| S-EPMC6044878 | biostudies-literature
Project description:We developed a simple and one-step method to prepare biocompatible composites from cellulose (CEL) and chitosan (CS). [BMIm(+)Cl(-)], an ionic liquid (IL), was used as a green solvent to dissolve and prepare the [CEL+CS] composites. Since majority (>88%) of IL used was recovered for reuse by distilling the aqueous washings of [CEL+CS], the method is recyclable. XRD, FTIR, NIR, (13)C CP-MAS-NMR and SEM were used to monitor the dissolution and to characterize the composites. The composite was found to have combined advantages of their components: superior mechanical strength (from CEL) and excellent adsorption capability for microcystin-LR, a deadly toxin produced by cyanobacteria (from CS). Specifically, the mechanical strength of the composites increased with CEL loading; e.g., up to 5× increase in tensile strength was achieved by adding 80% of CEL into CS. Kinetic results of adsorption confirm that unique properties of CS remain intact in the composite, i.e., it is not only a very good adsorbent for microcystin but also is better than all other available adsorbents. For example, it can adsorb 4× times more microcystin than the best reported adsorbent. Importantly, the microcystin adsorbed can be quantitatively desorbed to enable the composite to be reused with similar adsorption efficiency.
| S-EPMC3660506 | biostudies-literature
Project description:We report the manufacturing and characterization of poly (butylene succinate) (PBS) and micro cellulose (MCC) woody-like composites. These composites can be applied as a sustainable woody-like composite alternative to conventional fossil polymer-based wood-plastic composites (WPC). The PBS/MCC composites were prepared by using a melt blending of 70 wt% of MCC processed from bleached softwood. MCC was modified to enhance dispersion and compatibility by way of carbodiimide (CDI), polyhydroxy amides (PHA), alkyl ester (EST), (3-Aminopropyl) trimethoxysilane (APTMS), maleic acid anhydride (MAH), and polymeric diphenylmethane diisocyanate (PMDI). The addition of filler into PBS led to a 4.5-fold improvement of Young's modulus E for the MCC composite, in comparison to neat PBS. The 1.6-fold increase of E was obtained for CDI modified composition in comparison to the unmodified MCC composite. At room temperature, the storage modulus E' was found to improve by almost 4-fold for the APTMS composite. The EST composite showed a pronounced enhancement in viscoelasticity properties due to the introduction of flexible long alkyl chains in comparison to other compositions. The glass transition temperature was directly affected by the composition and its value was -15 °C for PBS, -30 °C for EST, and -10 °C for MAH composites. FTIR indicated the generation of strong bonding between the polymer and cellulose components in the composite. Scanning electron microscopy analysis evidenced the agglomeration of the MCC in the PBS/MCC composites. PMDI, APTMS, and CDI composites were characterized by the uniform dispersion of MCC particles and a decrease of polymer crystallinity. MCC chemical modification induced the enhancement of the thermal stability of MCC composites.
| S-EPMC6982959 | biostudies-literature
Project description:Nowadays, there is greater demand for greener materials in societies due to environmental consciousness, depleting fossil fuels and growing ecological concerns. Within the foreseeable future, industries and suppliers will be required to be more aware of challenges faced due to the availability of resources and use more sustainable and renewable raw materials. In this context, cellulose can be expected to become a vital resource for materials owing to its abundance, versatility as a biopolymer, several different forms and potential applications. Thus, all-cellulose composites (ACCs) have gained significant research interest in recent years. ACC is a class of biocomposites in which the matrix is a dissolved and regenerated cellulose, while the reinforcement is undissolved or partly dissolved cellulose. This review paper is intended to provide a brief outline of works that cover recent progress in the manufacturing and processing techniques for ACCs, various cellulose sources, solvents and antisolvents, as well as their properties.
| S-EPMC7356676 | biostudies-literature