Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Thermal dynamics and electronic temperature waves in layered correlated materials.

ABSTRACT: Understanding the mechanism of heat transfer in nanoscale devices remains one of the greatest intellectual challenges in the field of thermal dynamics, by far the most relevant under an applicative standpoint. When thermal dynamics is confined to the nanoscale, the characteristic timescales become ultrafast, engendering the failure of the common description of energy propagation and paving the way to unconventional phenomena such as wave-like temperature propagation. Here, we explore layered strongly correlated materials as a platform to identify and control unconventional electronic heat transfer phenomena. We demonstrate that these systems can be tailored to sustain a wide spectrum of electronic heat transport regimes, ranging from ballistic, to hydrodynamic all the way to diffusive. Within the hydrodynamic regime, wave-like temperature oscillations are predicted up to room temperature. The interaction strength can be exploited as a knob to control the dynamics of temperature waves as well as the onset of different thermal transport regimes.

SUBMITTER: Mazza G

PROVIDER: S-EPMC8616949 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Ultrahigh thermal isolation across heterogeneously layered two-dimensional materials.

Project description:Heterogeneous integration of nanomaterials has enabled advanced electronics and photonics applications. However, similar progress has been challenging for thermal applications, in part due to shorter wavelengths of heat carriers (phonons) compared to electrons and photons. Here, we demonstrate unusually high thermal isolation across ultrathin heterostructures, achieved by layering atomically thin two-dimensional (2D) materials. We realize artificial stacks of monolayer graphene, MoS2, and WSe2 with thermal resistance greater than 100 times thicker SiO2 and effective thermal conductivity lower than air at room temperature. Using Raman thermometry, we simultaneously identify the thermal resistance between any 2D monolayers in the stack. Ultrahigh thermal isolation is achieved through the mismatch in mass density and phonon density of states between the 2D layers. These thermal metamaterials are an example in the emerging field of phononics and could find applications where ultrathin thermal insulation is desired, in thermal energy harvesting, or for routing heat in ultracompact geometries.

| S-EPMC6697438 | biostudies-literature

Probing interlayer shear thermal deformation in atomically-thin van der Waals layered materials.

Project description:Atomically-thin van der Waals layered materials, with both high in-plane stiffness and bending flexibility, offer a unique platform for thermomechanical engineering. However, the lack of effective characterization techniques hinders the development of this research topic. Here, we develop a direct experimental method and effective theoretical model to study the mechanical, thermal, and interlayer properties of van der Waals materials. This is accomplished by using a carefully designed WSe2-based heterostructure, where monolayer WSe2 serves as an in-situ strain meter. Combining experimental results and theoretical modelling, we are able to resolve the shear deformation and interlayer shear thermal deformation of each individual layer quantitatively in van der Waals materials. Our approach also provides important interlayer coupling information as well as key thermal parameters. The model can be applied to van der Waals materials with different layer numbers and various boundary conditions for both thermally-induced and mechanically-induced deformations.

| S-EPMC9271035 | biostudies-literature

Tracking the Influence of Thermal Expansion and Oxygen Vacancies on the Thermal Stability of Ni-Rich Layered Cathode Materials.

Project description:The ever-growing demand for high-energy lithium-ion batteries in portable electronics and electric vehicles has triggered intensive research efforts over the past decade. An efficient strategy to boost the energy and power density of lithium-ion batteries is to increase the Ni content in the cathode materials. However, a higher Ni content in the cathode materials gives rise to safety issues. Herein, thermal expansion and oxygen vacancies are proposed as new critical factors that affect the thermal stability of charged Ni-rich cathode materials based on a systematic synchrotron-based X-ray study of Li0.33Ni0.5+ x Co0.2Mn0.3- x O2 (x = 0, 0.1, 0.2) cathode materials during a heating process. Charged cathode materials with higher Ni contents show larger thermal expansion, which accelerates transition metal migration to the Li layers. Oxygen vacancies are formed and accumulate mainly around Ni ions until the layered-to-spinel phase transition begins. The oxygen vacancies also facilitate transition metal migration to the Li layers. Thermal expansion and the presence of oxygen vacancies decrease the energy barrier for cation migration and facilitate the phase transitions in charged cathode materials during the heating process. These results provide valuable guidance for developing new cathode materials with improved safety characteristics.

| S-EPMC7312338 | biostudies-literature

Evaluation of Physico-Mechanical Properties and Thermal Conduction to Energy-Saving Effects of Wood Compression Layered Structural Materials.

Project description:In this study, specimens were prepared from Japanese cedar (Cryptomeria japonica) with different thicknesses to determine the best hot-pressing conditions for wood compression layered structural materials (WCLS) through densification at various temperatures and compressing time conditions. However, residual stress-releasing after densification recovery can cause dimensional instability. To address this issue, the drying set method was combined with the compression-set recovery test to determine the best setting time. As a result, the bending strength and modulus of rupture (MOR) of WCLS increased by 9.98 ± 9.71 to 20.87 ± 13.09% and the modulus of elasticity (MOE) increased by 9.87 ± 11.92 to 22.40 ± 17.97%. The volumetric swelling coefficient (S), water absorption percent (WAP), and equivalent moisture content (EMC) decreased as the drying time increased. The anti-swelling efficiency (ASE) and moisture excluding efficiency (MEE) were found to be the highest at a drying time of 12 h, with values ranging from 13.20 ± 15.11 to 36.46 ± 6.83% and 15.18 ± 1.11 to 19.58 ± 8.31%, respectively. The drying method was found to be effective in increasing dimensional stability. The glass transition temperature (Tg) moved to a lower temperature as the compression-set increased, which was due to plasticization of wood caused by high temperature and pressure. The cell walls of WCLS presented viscous buckling, which provided effective dimensional stability. The thermal conductivity of Japanese cedar and each compression-set WCLS were 0.1863 ± 0.0071, 0.1520 ± 0.0147, 0.1817 ± 0.0106, and 0.1423 ± 0.0137 W/mK, respectively. The thermal conductivity of each WCLS increased with an increase in compression-set, but decreased by 10.67 to 22.52% compared to Japanese cedar. The total electricity energy consumption of each WCLS after 24 h of testing decreased with a trend of 30.50 ± 0.84, 29.83 ± 0.42, 29.57 ± 0.51, and 29.4 ± 0.36 kWH.

| S-EPMC10421106 | biostudies-literature

Cleaning interfaces in layered materials heterostructures.

Project description:Heterostructures formed by stacking layered materials require atomically clean interfaces. However, contaminants are usually trapped between the layers, aggregating into randomly located blisters, incompatible with scalable fabrication processes. Here we report a process to remove blisters from fully formed heterostructures. Our method is over an order of magnitude faster than those previously reported and allows multiple interfaces to be cleaned simultaneously. We fabricate blister-free regions of graphene encapsulated in hexagonal boron nitride with an area ~ 5000??m2, achieving mobilities up to 180,000?cm2?V-1?s-1 at room temperature, and 1.8?×?106?cm2?V-1?s-1 at 9?K. We also assemble heterostructures using graphene intentionally exposed to polymers and solvents. After cleaning, these samples reach similar mobilities. This demonstrates that exposure of graphene to process-related contaminants is compatible with the realization of high mobility samples, paving the way to the development of wafer-scale processes for the integration of layered materials in (opto)electronic devices.

| S-EPMC6300598 | biostudies-literature

Growth temperature and genome size in bacteria are negatively correlated, suggesting genomic streamlining during thermal adaptation.

Project description:Prokaryotic genomes are small and compact. Either this feature is caused by neutral evolution or by natural selection favoring small genomes-genome streamlining. Three separate prior lines of evidence argue against streamlining for most prokaryotes. We find that the same three lines of evidence argue for streamlining in the genomes of thermophile bacteria. Specifically, with increasing habitat temperature and decreasing genome size, the proportion of genomic DNA in intergenic regions decreases. Furthermore, with increasing habitat temperature, generation time decreases. Genome-wide selective constraints do not decrease as in the reduced genomes of host-associated species. Reduced habitat variability is not a likely explanation for the smaller genomes of thermophiles. Genome size may be an indirect target of selection due to its association with cell volume. We use metabolic modeling to demonstrate that known changes in cell structure and physiology at high temperature can provide a selective advantage to reduce cell volume at high temperatures.

| S-EPMC3673621 | biostudies-literature

Room temperature large-scale synthesis of layered frameworks as low-cost 4?V cathode materials for lithium ion batteries.

Project description:Li-ion batteries (LIBs) are considered as the best available technology to push forward the production of eco-friendly electric vehicles (EVs) and for the efficient utilization of renewable energy sources. Transformation from conventional vehicles to EVs are hindered by the high upfront price of the EVs and are mainly due to the high cost of LIBs. Hence, cost reduction of LIBs is one of the major strategies to bring forth the EVs to compete in the market with their gasoline counterparts. In our attempt to produce cheaper high-performance cathode materials for LIBs, an rGO/MOPOF (reduced graphene oxide/Metal-Organic Phosphate Open Framework) nanocomposite with ~4?V of operation has been developed by a cost effective room temperature synthesis that eliminates any expensive post-synthetic treatments at high temperature under Ar/Ar-H2. Firstly, an hydrated nanocomposite, rGO/K2[(VO)2(HPO4)2(C2O4)]·4.5H2O has been prepared by simple magnetic stirring at room temperature which releases water to form the anhydrous cathode material while drying at 90?°C during routine electrode fabrication procedure. The pristine MOPOF material undergoes highly reversible lithium storage, however with capacity fading. Enhanced lithium cycling has been witnessed with rGO/MOPOF nanocomposite which exhibits minimal capacity fading thanks to increased electronic conductivity and enhanced Li diffusivity.

| S-EPMC4655412 | biostudies-literature

Non-linear Terahertz driving of plasma waves in layered cuprates.

Project description:The hallmark of superconductivity is the rigidity of the quantum-mechanical phase of electrons, responsible for superfluid behavior and Meissner effect. The strength of the phase stiffness is set by the Josephson coupling, which is strongly anisotropic in layered cuprates. So far, THz light pulses have been used to achieve non-linear control of the out-of-plane Josephson plasma mode, whose frequency lies in the THz range. However, the high-energy in-plane plasma mode has been considered insensitive to THz pumping. Here, we show that THz driving of both low-frequency and high-frequency plasma waves is possible via a general two-plasmon excitation mechanism. The anisotropy of the Josephson couplings leads to markedly different thermal effects for the out-of-plane and in-plane response, linking in both cases the emergence of non-linear photonics across Tc to the superfluid stiffness. Our results show that THz light pulses represent a preferential knob to selectively drive phase excitations in unconventional superconductors.

| S-EPMC7854596 | biostudies-literature

Understanding the friction of atomically thin layered materials.

Project description:Friction is a ubiquitous phenomenon that greatly affects our everyday lives and is responsible for large amounts of energy loss in industrialised societies. Layered materials such as graphene have interesting frictional properties and are often used as (additives to) lubricants to reduce friction and protect against wear. Experimental Atomic Force Microscopy studies and detailed simulations have shown a number of intriguing effects such as frictional strengthening and dependence of friction on the number of layers covering a surface. Here, we propose a simple, fundamental, model for friction on thin sheets. We use our model to explain a variety of seemingly contradictory experimental as well as numerical results. This model can serve as a basis for understanding friction on thin sheets, and opens up new possibilities for ultimately controlling their friction and wear protection.

| S-EPMC6972962 | biostudies-literature

Thermal fluctuations of haemoglobin from different species: adaptation to temperature via conformational dynamics.

Project description:Thermodynamic stability, configurational motions and internal forces of haemoglobin (Hb) of three endotherms (platypus, Ornithorhynchus anatinus; domestic chicken, Gallus gallus domesticus and human, Homo sapiens) and an ectotherm (salt water crocodile, Crocodylus porosus) were investigated using circular dichroism, incoherent elastic neutron scattering and coarse-grained Brownian dynamics simulations. The experimental results from Hb solutions revealed a direct correlation between protein resilience, melting temperature and average body temperature of the different species on the 0.1 ns time scale. Molecular forces appeared to be adapted to permit conformational fluctuations with a root mean square displacement close to 1.2 Å at the corresponding average body temperature of the endotherms. Strong forces within crocodile Hb maintain the amplitudes of motion within a narrow limit over the entire temperature range in which the animal lives. In fully hydrated powder samples of human and chicken, Hb mean square displacements and effective force constants on the 1 ns time scale showed no differences over the whole temperature range from 10 to 300 K, in contrast to the solution case. A complementary result of the study, therefore, is that one hydration layer is not sufficient to activate all conformational fluctuations of Hb in the pico- to nanosecond time scale which might be relevant for biological function. Coarse-grained Brownian dynamics simulations permitted to explore residue-specific effects. They indicated that temperature sensing of human and chicken Hb occurs mainly at residues lining internal cavities in the β-subunits.

| S-EPMC3479923 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data