Browse
Submit Data
Databases
API
Help

Dataset Information

19 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Defect engineering on V₂O₃ cathode for long-cycling aqueous zinc metal batteries.

ABSTRACT: Defect engineering is a strategy that is attracting widespread attention for the possibility of modifying battery active materials in order to improve the cycling stability of the electrodes. However, accurate investigation and quantification of the effect of the defects on the electrochemical energy storage performance of the cell are not trivial tasks. Herein, we report the quantification of vanadium-defective clusters (i.e., up to 5.7%) in the V₂O₃ lattice via neutron and X-ray powder diffraction measurements, positron annihilation lifetime spectroscopy, and synchrotron-based X-ray analysis. When the vanadium-defective V₂O₃ is employed as cathode active material in an aqueous Zn coin cell configuration, capacity retention of about 81% after 30,000 cycles at 5 A g^-1 is achieved. Density functional theory calculations indicate that the vanadium-defective clusters can provide favorable sites for reversible Zn-ion storage. Moreover, the vanadium-defective clusters allow the storage of Zn ions in V₂O₃, which reduces the electrostatic interaction between the host material and the multivalent ions.

SUBMITTER: Zhu K

PROVIDER: S-EPMC8617200 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A nano interlayer spacing and rich defect 1T-MoS2 as cathode for superior performance aqueous zinc-ion batteries.

Project description:Aqueous Zn-ion batteries (ZIBs) are considered very promising alternatives to lithium-ion batteries. However, the low reversibility and slow diffusion of zinc ions in the positive electrode limit their commercial applications. Herein, we successfully prepared the metallic 1T phase of MoS2 (1T-MoS2) with a nano interlayer spacing of 1.025 nm through a simple one-step hydrothermal method, and used it as a cathode in ZIBs. By adjusting the hydrothermal temperature, the crystallinity and Zn2+ storage capacity of MoS2 as a cathode for ZIBs are effectively improved. MoS2 had the most favorable structure when the hydrothermal temperature was 200 °C, such as larger layer spacing and more lattice distortion. When employed as a cathode, 200-MoS2 exhibited a considerable specific capacity of 125 mA h g-1 at the current density of 2 A g-1 and high capacity retention of 100% after 500 cycles. This strategy provides a new option for improving the performance of the layered structure as an aqueous zinc ion battery.

| S-EPMC9418942 | biostudies-literature

δ-MnO2 nanoflower/graphite cathode for rechargeable aqueous zinc ion batteries.

Project description:Manganese oxide (MnO2) is one of the most promising intercalation cathode materials for zinc ion batteries (ZIBs). Specifically, a layered type delta manganese dioxide (δ-MnO2) allows reversible insertion/extraction of Zn2+ ions and exhibits high storage capacity of Zn2+ ions. However, a poor conductivity of δ-MnO2, as well as other crystallographic forms, limits its potential applications. This study focuses on δ-MnO2 with nanoflower structure supported on graphite flake, namely MNG, for use as an intercalation host material of rechargeable aqueous ZIBs. Pristine δ-MnO2 nanoflowers and MNG were synthesized and examined using X-ray diffraction, electron spectroscopy, and electrochemical techniques. Also, performances of the batteries with the pristine δ-MnO2 nanoflowers and MNG cathodes were studied in CR2032 coin cells. MNG exhibits a fast insertion/extraction of Zn2+ ions with diffusion scheme and pseudocapacitive behavior. The battery using MNG cathode exhibited a high initial discharge capacity of 235 mAh/g at 200 mA/g specific current density compared to 130 mAh/g which is displayed by the pristine δ-MnO2 cathode at the same specific current density. MNG demonstrated superior electrical conductivity compared to the pristine δ-MnO2. The results obtained pave the way for improving the electrical conductivity of MnO2 by using graphite flake support. The graphite flake support significantly improved performances of ZIBs and made them attractive for use in a wide variety of energy applications.

| S-EPMC6560026 | biostudies-literature

Cathode-Electrolyte Interface Modification by Binder Engineering for High-Performance Aqueous Zinc-Ion Batteries.

Project description:A stable cathode-electrolyte interface (CEI) is crucial for aqueous zinc-ion batteries (AZIBs), but it is less investigated. Commercial binder poly(vinylidene fluoride) (PVDF) is widely used without scrutinizing its suitability and cathode-electrolyte interface (CEI) in AZIBs. A water-soluble binder is developed that facilitated the in situ formation of a CEI protecting layer tuning the interfacial morphology. By combining a polysaccharide sodium alginate (SA) with a hydrophobic polytetrafluoroethylene (PTFE), the surface morphology, and charge storage kinetics can be confined from diffusion-dominated to capacitance-controlled processes. The underpinning mechanism investigates experimentally in both kinetic and thermodynamic perspectives demonstrate that the COO- from SA acts as an anionic polyelectrolyte facilitating the adsorption of Zn2+ ; meanwhile fluoride atoms on PTFE backbone provide hydrophobicity to break desolvation penalty. The hybrid binder is beneficial in providing a higher areal flux of Zn2+ at the CEI, where the Zn-Birnessite MnO2 battery with the hybrid binder exhibits an average specific capacity 45.6% higher than that with conventional PVDF binders; moreover, a reduced interface activation energy attained fosters a superior rate capability and a capacity retention of 99.1% in 1000 cycles. The hybrid binder also reduces the cost compared to the PVDF/NMP, which is a universal strategy to modify interface morphology.

| S-EPMC9929112 | biostudies-literature

Oxygen-Deficient β-MnO2@Graphene Oxide Cathode for High-Rate and Long-Life Aqueous Zinc Ion Batteries.

Project description:Recent years have witnessed a booming interest in grid-scale electrochemical energy storage, where much attention has been paid to the aqueous zinc ion batteries (AZIBs). Among various cathode materials for AZIBs, manganese oxides have risen to prominence due to their high energy density and low cost. However, sluggish reaction kinetics and poor cycling stability dictate against their practical application. Herein, we demonstrate the combined use of defect engineering and interfacial optimization that can simultaneously promote rate capability and cycling stability of MnO2 cathodes. β-MnO2 with abundant oxygen vacancies (VO) and graphene oxide (GO) wrapping is synthesized, in which VO in the bulk accelerate the charge/discharge kinetics while GO on the surfaces inhibits the Mn dissolution. This electrode shows a sustained reversible capacity of ~ 129.6 mAh g-1 even after 2000 cycles at a current rate of 4C, outperforming the state-of-the-art MnO2-based cathodes. The superior performance can be rationalized by the direct interaction between surface VO and the GO coating layer, as well as the regulation of structural evolution of β-MnO2 during cycling. The combinatorial design scheme in this work offers a practical pathway for obtaining high-rate and long-life cathodes for AZIBs.

| S-EPMC8363675 | biostudies-literature

Phase transformation mechanism of MnCO3 as cathode materials for aqueous zinc-ion batteries.

Project description:Aqueous rechargeable zinc-ion batteries (ZIBs) have been given more and more attention because of their high specific capacity, high safety, and low cost. The reasonable design of Mn-based cathode materials is an effective way to improve the performance of ZIBs. Herein, a square block MnCO3 electrode material is synthesized on the surface of carbon cloth by a one-step hydrothermal method. The phase transition of MnCO3 was accompanied by the continuous increase of specific capacity, and finally maintained good cycle stability in the charge-discharge process. The maximum specific capacity of MnCO3 electrode material can reach 83.62 mAh g-1 at 1 A g-1. The retention rate of the capacity can reach 85.24% after 1,500 cycles compared with the stable capacity (the capacity is 61.44 mAh g-1 under the 270th cycle). Ex situ characterization indicates that the initial MnCO3 gradually transformed into MnO2 accompanied by the embedding and stripping of H+ and Zn2+ in charge and discharge. When MnCO3 is no longer transformed into MnO2, the cycle tends to be stable. The phase transformation of MnCO3 could provide a new research idea for improving the performance of electrode materials for energy devices.

| S-EPMC9388732 | biostudies-literature

A high capacity small molecule quinone cathode for rechargeable aqueous zinc-organic batteries.

Project description:Rechargeable aqueous zinc-organic batteries are promising energy storage systems with low-cost aqueous electrolyte and zinc metal anode. The electrochemical properties can be systematically adjusted with molecular design on organic cathode materials. Herein, we use a symmetric small molecule quinone cathode, tetraamino-p-benzoquinone (TABQ), with desirable functional groups to protonate and accomplish dominated proton insertion from weakly acidic zinc electrolyte. The hydrogen bonding network formed with carbonyl and amino groups on the TABQ molecules allows facile proton conduction through the Grotthuss-type mechanism. It guarantees activation energies below 300 meV for charge transfer and proton diffusion. The TABQ cathode delivers a high capacity of 303 mAh g-1 at 0.1 A g-1 in a zinc-organic battery. With the increase of current density to 5 A g-1, 213 mAh g-1 capacity is still preserved with stable cycling for 1000 times. Our work proposes an effective approach towards high performance organic electrode materials.

| S-EPMC8292436 | biostudies-literature

Tailoring the metal electrode morphology via electrochemical protocol optimization for long-lasting aqueous zinc batteries.

Project description:Aqueous zinc metal batteries are a viable candidate for cost-effective energy storage. However, the cycle life of the cell is adversely affected by the morphological evolution of the metal electrode surface upon prolonged cycling. Here, we investigate different electrochemical protocols to favour the formation of stable zinc metal electrode surface morphologies. By coupling electrochemical and optical microscopy measurements, we demonstrate that an initial zinc deposition on the metal electrode allows homogeneous stripping and plating processes during prolonged cycling in symmetric Zn||Zn cell. Interestingly, when an initially plated zinc metal electrode is tested in combination with a manganese dioxide-based positive electrode and a two molar zinc sulfate aqueous electrolyte solution in coin cell configuration, a specific discharge capacity of about 90 mAh g-1 can be delivered after 2000 cycles at around 5.6 mA cm-2 and 25 °C.

| S-EPMC9237080 | biostudies-literature

Improving the capacity of zinc-ion batteries through composite defect engineering.

Project description:Aqueous zinc-ion batteries (ZIB) are favored because of their low cost and high safety. However, as the most widely used cathodes, the rate performance and long-term cycle performance of manganese-based oxides are very worrying, which greatly affects their commercialization. Here, MnO2 with composite defects of cation doping and oxygen vacancies was synthesized for the first time. Cation doping promoted the diffusion and transport of H+ and oxygen vacancies weakened the zinc-oxygen bond, allowing more electrons to be added to the charge and discharge process. The combination of these makes α-MnO2 obtain a specific capacity of up to 346 mA h g-1. This inspired us to use different combinations of defect engineering strategies on the materials which can be implemented as a potential method to improve performance for the modification of ZIB cathode materials, such as cation vacancies and anion doping.

| S-EPMC9042365 | biostudies-literature

Rod-like anhydrous V2O5 assembled by tiny nanosheets as a high-performance cathode material for aqueous zinc-ion batteries.

Project description:Aqueous zinc-ion batteries offer a low-cost and high-safety alternative for next-generation electrochemical energy storage, whereas suitable cathode materials remain to be explored. Herein, rod-like anhydrous V2O5 derived from a vanadium-based metal-organic framework is investigated. Interestingly, this material is assembled by tiny nanosheets with a large surface area of 218 m2 g-1 and high pore volume of 0.96 cm3 g-1. Benefiting from morphological and structural merits, this material exhibits excellent performances, such as high reversible capacity (449.8 mA h g-1 at 0.1 A g-1), good rate capability (314.3 mA h g-1 at 2 A g-1), and great long-term cyclability (86.8% capacity retention after 2000 cycles at 2 A g-1), which are significantly superior to the control sample. Such great performances are found to derive from high Zn2+ ion diffusion coefficient, large contribution of intercalation pseudocapacitance, and fast electrochemical kinetics. The ex situ measurements unveil that the intercalation of Zn2+ ion is accompanied by the reversible V5+ reduction and H2O incorporation. This work discloses a direction for designing and fabricating high-performance cathode materials for zinc-ion batteries and other advanced energy storage systems.

| S-EPMC9072160 | biostudies-literature

Metal-Organic Frameworks Functionalized Separators for Robust Aqueous Zinc-Ion Batteries.

Project description:Aqueous zinc-ion batteries (AZIBs) are one of the promising energy storage systems, which consist of electrode materials, electrolyte, and separator. The first two have been significantly received ample development, while the prominent role of the separators in manipulating the stability of the electrode has not attracted sufficient attention. In this work, a separator (UiO-66-GF) modified by Zr-based metal organic framework for robust AZIBs is proposed. UiO-66-GF effectively enhances the transport ability of charge carriers and demonstrates preferential orientation of (002) crystal plane, which is favorable for corrosion resistance and dendrite-free zinc deposition. Consequently, Zn|UiO-66-GF-2.2|Zn cells exhibit highly reversible plating/stripping behavior with long cycle life over 1650 h at 2.0 mA cm-2, and Zn|UiO-66-GF-2.2|MnO2 cells show excellent long-term stability with capacity retention of 85% after 1000 cycles. The reasonable design and application of multifunctional metal organic frameworks modified separators provide useful guidance for constructing durable AZIBs.

| S-EPMC9646683 | biostudies-literature