Assessing the Viscoelasticity of Photopolymer Nanowires Using a Three-Parameter Solid Model for Bending Recovery Motion.
Ontology highlight
ABSTRACT:
SUBMITTER: Kubackova J
PROVIDER: S-EPMC8618069 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:This study presents a framework for viscoelasticity where the free energy density depends on the stored energy of intact strong and weak bonds, where weak bonds break and reform in response to loading. The stress is evaluated by differentiating the free energy density with respect to the deformation gradient, similar to the conventional approach for hyperelasticity. The breaking and reformation of weak bonds is treated as a reaction governed by the axiom of mass balance, where the constitutive relation for the mass supply governs the bond kinetics. The evolving mass contents of these weak bonds serve as observable state variables. Weak bonds reform in an energy-free and stress-free state, therefore their reference configuration is given by the current configuration at the time of their reformation. A principal advantage of this formulation is the availability of a strain energy density function that depends only on observable state variables, also allowing for a separation of the contributions of strong and weak bonds. The Clausius-Duhem inequality is satisfied by requiring that the net free energy from all breaking bonds must be decreasing at all times. In the limit of infinitesimal strains, linear stress-strain responses and first-order kinetics for breaking and reforming of weak bonds, the reactive framework reduces exactly to classical linear viscoelasticity. For large strains, the reactive and classical quasilinear viscoelasticity theories produce different equations, though responses to standard loading configurations behave similarly. This formulation complements existing tools for modeling the nonlinear viscoelastic response of biological soft tissues under large deformations.
| S-EPMC4422403 | biostudies-literature
Project description:In this study, pentagonal Ag and Au nanowires (NWs) were bent in cantilever beam configuration inside a scanning electron microscope. We demonstrated an unusual, abrupt elastic-to-plastic transition, observed as a sudden change of the NW profile from smooth arc-shaped to angled knee-like during the bending in the narrow range of bending angles. In contrast to the behavior of NWs in the tensile and three-point bending tests, where extensive elastic deformation was followed by brittle fracture, in our case, after the abrupt plastic event, the NW was still far from fracture and enabled further bending without breaking. A possible explanation is that the five-fold twinned structure prevents propagation of critical defects, leading to dislocation pile up that may lead to sudden stress release, which is observed as an abrupt plastic event. Moreover, we found that if the NWs are coated with alumina, the abrupt plastic event is not observed and the NWs can withstand severe deformation in the elastic regime without fracture. The coating may possibly prevent formation of dislocations. Mechanical durability under high and inhomogeneous strain fields is an important aspect of exploiting Ag and Au NWs in applications like waveguiding or conductive networks in flexible polymer composite materials.
| S-EPMC6941403 | biostudies-literature
Project description:Three-dimensional (3D) printing is emerging as a method for microfluidic device fabrication boasting facile and low-cost fabrication, as compared to conventional fabrication approaches, such as photolithography, for poly(dimethylsiloxane) (PDMS) counterparts. Additionally, there is an increasing trend in the development and implementation of miniaturized and automatized devices for health monitoring. While nonspecific protein adsorption by PDMS has been studied as a limitation for reusability, the protein adsorption characteristics of 3D-printed materials have not been well-studied or characterized. With these rationales in mind, we study the reusability of 3D-printed microfluidics chips. Herein, a 3D-printed cleaning chip, consisting of inlets for the sample, cleaning solution, and air, and a universal outlet, is presented to assess the reusability of a 3D-printed microfluidic device. Bovine serum albumin (BSA) was used a representative urinary protein and phosphate-buffered solution (PBS) was chosen as the cleaning agent. Using the 3-(4-carboxybenzoyl)quinoline-2-carboxaldehyde (CBQCA) fluorescence detection method, the protein cross-contamination between samples and the protein uptake of the cleaning chip were assessed, demonstrating a feasible 3D-printed chip design and cleaning procedure to enable reusable microfluidic devices. The performance of the 3D-printed cleaning chip for real urine sample handling was then validated using a commercial dipstick assay.
| S-EPMC6215198 | biostudies-literature
Project description:Semiconductor nanowires are promising material systems for coming-of-age nanotechnology. The usage of the vapor-solid-solid (VSS) route, where the catalyst used for promoting axial growth of nanowires is a solid, offers certain advantages compared to the common vapor-liquid-solid (VLS) route (using a liquid catalyst). The VSS growth of group-IV elemental nanowires has been investigated by other groups in situ during growth in a transmission electron microscope (TEM). Though it is known that compound nanowire growth has different dynamics compared to elemental semiconductors, the layer growth dynamics of VSS growth of compound nanowires have not been studied yet. Here we investigate for the first time controlled VSS growth of compound nanowires by in situ microscopy, using Au-seeded GaAs as a model system. The ledge-flow growth kinetics and dynamics at the wire-catalyst interface are studied and compared for liquid and solid catalysts under similar growth conditions. Here the temperature and thermal history of the system are manipulated to control the catalyst phase. In the first experiment discussed here we reduce the growth temperature in steps to solidify the initially liquid catalyst, and compare the dynamics between VLS and VSS growth observed at slightly different temperatures. In the second experiment we exploit thermal hysteresis of the system to obtain both VLS and VSS at the same temperature. The VSS growth rate is comparable or slightly slower than the VLS growth rate. Unlike in the VLS case, during VSS growth we frequently observe that a new layer starts before the previous layer is completely grown, i.e., 'multilayer growth'. Understanding the VSS growth mode enables better control of nanowire properties by widening the range of usable nanowire growth parameters.
| S-EPMC9418180 | biostudies-literature
Project description:The ear detects sounds so faint that they produce only atomic-scale displacements in the mechanoelectrical transducer, yet thermal noise causes fluctuations larger by an order of magnitude. Explaining how hearing can operate when the magnitude of the noise greatly exceeds that of the signal requires an understanding both of the transducer's micromechanics and of the associated noise. Using microrheology, we characterize the statistics of this noise; exploiting the fluctuation-dissipation theorem, we determine the associated micromechanics. The statistics reveal unusual Brownian motion in which the mean square displacement increases as a fractional power of time, indicating that the mechanisms governing energy dissipation are related to those of energy storage. This anomalous scaling contradicts the canonical model of mechanoelectrical transduction, but the results can be explained if the micromechanics incorporates viscoelasticity, a salient characteristic of biopolymers. We amend the canonical model and demonstrate several consequences of viscoelasticity for sensory coding.
| S-EPMC3286975 | biostudies-literature
Project description:We report the synthesis of single crystalline Co(2)Si nanowires and the electrical transport studies of single Co(2)Si nanowire devices at low temperature. The butterfly shaped magnetoresistance shows interesting ferromagnetic features, including negative magnetoresistance, hysteretic switch fields, and stepwise drops in magnetoresistance. The nonsmooth stepwise magnetoresistance response is attributed to magnetic domain wall pinning and depinning motion in the Co(2)Si nanowires probably at crystal or morphology defects. The temperature dependence of the domain wall depinning field is observed and described by a model based on thermally assisted domain wall depinning over a single energy barrier.
| S-EPMC3493485 | biostudies-literature
Project description:In this work, we investigate the effects of bends on the surface plasmon resonances in nanowires (NWs) and isolated edges of planar structures using electron energy loss spectroscopy experiments and theoretical calculations. Previous work showed that the sharp bends in NWs do not affect their resonant modes. Here, we study previously overlooked effects and analyze systematically the evolution of resonant modes for several bending angles from 30° to 180°, showing that bending can have a significant effect on the plasmonic response of a nanostructure. In NWs, the modes can experience significant energy shifts that depend on the aspect ratio of the NW and can cause mode intersection and antinode bunching. We establish the relation between NW modes and edge modes and show that bending can even induce antinode splitting in edge modes. This work demonstrates that bends in plasmonic planar nanostructures can have a profound effect on their optical response and this must be accounted for in the design of optical devices.
| S-EPMC9728462 | biostudies-literature
Project description:Confined diffusion is an important model for describing the motion of biological macromolecules moving in the crowded, three-dimensional environment of the cell. In this work we build upon the technique known as sequential Monte Carlo - expectation maximization (SMC-EM) to simultaneously localize the particle and estimate the motion model parameters from single particle tracking data. We extend SMC-EM to handle the double-helix point spread function (DH-PSF) for encoding the three-dimensional position of the particle in the two-dimensional image plane of the camera. SMC-EM can handle a wide range of camera models and here we assume the data was acquired using a scientific CMOS (sCMOS) camera. The sensitivity and speed of these cameras make them well suited for SPT, though the pixel-dependent nature of the camera noise presents a challenge for analysis. We focus on the low signal setting and compare our method through simulation to more standard approaches that use the paradigm of localize-then-estimate. To localize the particle under the standard paradigm, we use both a Gaussian fit and a maximum likelihood estimator (MLE) that accounts for both the DH-PSF and the pixel-dependent noise of the camera. Model estimation is then carried out either by fitting the model to the mean squared displacement (MSD) curve, or through an optimal estimation approach. Our results indicate that in the low signal regime, the SMC-EM approach outperforms the other methods while at higher signal-to-background levels, SMC-EM and the MLE-based methods perform equally well and both are significantly better than fitting to the MSD. In addition our results indicate that at smaller confinement lengths where the nonlinearities dominate the motion model, the SMC-EM approach is superior to the alternative approaches.
| S-EPMC8515956 | biostudies-literature
Project description:We applied sub-Hertz analysis of viscoelasticity (SAVE) to differentiate breast masses in pre-biopsy patients. Tissue response during external ramp-and-hold stress was ultrasonically detected. Displacements were used to acquire tissue viscoelastic parameters. The fast instantaneous response and slow creep-like deformations were modeled as the response of a linear standard solid from which viscoelastic parameters were estimated. These parameters were used in a multi-variable classification framework to differentiate malignant from benign masses identified by pathology. When employing all viscoelasticity parameters, SAVE resulted in 71.43% accuracy in differentiating lesions. When combined with ultrasound features and lesion size, accuracy was 82.24%. Adding a quality metric based on uniaxial motion increased the accuracy to 81.25%. When all three were combined with SAVE, accuracy was 91.3%. These results confirm the utility of SAVE as a robust ultrasound-based diagnostic tool for non-invasive differentiation of breast masses when used as stand-alone biomarkers or in conjunction with ultrasonic features.
| S-EPMC7606763 | biostudies-literature
Project description:The unique functionalities of antiferromagnets offer promising routes to advance information technology. Their compensated magnetic order leads to spin resonances in the THz-regime, which suggest the possibility to coherently control antiferromagnetic (AFM) devices orders of magnitude faster than traditional electronics. However, the required time resolution, complex sublattice interactions and the relative inaccessibility of the AFM order parameter pose serious challenges to studying AFM spin dynamics. Here, we reveal the temporal evolution of an AFM order parameter directly in the time domain. We modulate the AFM order in hexagonal YMnO3 by coherent magnon excitation and track the ensuing motion of the AFM order parameter using time-resolved optical second-harmonic generation. The dynamic symmetry reduction by the moving order parameter allows us to separate electron dynamics from spin dynamics. As transient symmetry reductions are common to coherent excitations, we have a general tool for tracking the ultrafast motion of an AFM order parameter.
| S-EPMC6728322 | biostudies-literature