Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The ZnO-In₂O₃ Oxide System as a Material for Low-Temperature Deposition of Transparent Electrodes.

ABSTRACT: The development of optoelectronic devices based on flexible organic substrates substantially decreases the possible process temperatures during all stages of device manufacturing. This makes it urgent to search for new transparent conducting oxide (TCO) materials, cheaper than traditional indium-tin oxide (ITO), for the low-temperature deposition of transparent electrodes, a necessary component of most optoelectronic devices. The article presents the results of a vertically integrated study aimed at the low-temperature production of TCO thin films based on a zinc-indium oxide (ZIO) system with acceptable functional characteristics. First, dense and conducting ceramic targets based on the (100-x) mol% (ZnO) + x mol% (In₂O₃) system (x = 0.5, 1.5, 2.5, 5.0, and 10.0) were synthesized by the spark plasma sintering method. The dependences of the microstructure and phase composition of the ZIO ceramic targets on the In₂O₃ content have been studied by powder X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy methods. Then, a set of ZIO thin films with different Zn/In ratios were obtained on unheated glass substrates by direct current (dc) magnetron sputtering of the sintered targets. Complex studies of microstructure, electrical and optical properties of the deposited films have revealed the presence of an optimal doping level (5 mol% In₂O₃) of the ZIO target at which the deposited TCO films, in terms of the combination of their electrical and optical properties, become comparable to the widely used expensive ITO.

SUBMITTER: Akhmedov A

PROVIDER: S-EPMC8618142 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Low-Temperature and Solution-Processable Zinc Oxide Transistors for Transparent Electronics.

Project description:Zinc oxide (ZnO) thin-film transistors (TFTs) have many promising applications in the areas of logic circuits, displays, ultraviolet detectors, and biosensors due to their high performances, facile fabrication processing, and low cost. The solution method is an important technique for low-cost and large fabrication of oxide semiconductor TFTs. However, a key challenge of solution-processable ZnO TFTs is the relatively high processing temperature (≥500 °C) for achieving high carrier mobility. Here, facile, low-cost, and solution-processable ZnO TFTs were fabricated under the annealing temperature of ≤300 °C. Dense and polycrystalline ZnO films were deposited by the spin-coating method. The ZnO TFTs showed the maximum electron mobility of 11 cm2/V s and a high on/off ratio of >107 when the ZnO thin films were annealed at 300 °C. The mobility was extremely high among solution-processable undoped ZnO TFTs reported previously, even better than some high-cost indium-doped ZnO TFTs fabricated at low temperature. Furthermore, it is found that the mechanism of oxygen vacancies dominates the electron transport in ZnO thin film and interface behaviors of ZnO thin film and SiO2 gate insulator, and then dominates the performances of devices.

| S-EPMC6645662 | biostudies-literature

Broadband photoresponse data of transparent all-oxide photovoltaics of ZnO/NiO.

Project description:In this data article, the properties of all transparent metal oxide of ZnO/NiO heterostructure "Transparent all-oxide photovoltaics and broadband high-speed energy-efficient optoelectronics" [1] are presented by characteristics of ZnO and NiO layers, open circuit voltage decay (OCVD), broadband light with intensity dependent current-voltage plots. The device performances under the effect of various optical excitation of intermediated-band, bound excitonic, free-excitonic and band-to-band are presented. The ZnO/NiO heterostructure direction grown on ITO/glass substrate by large area sputtering method [1] was characterized by UV-visible plots and scanning electron microscope (SEM). Carrier lifetime using OCVD of ZnO/NiO devices with carbon paint metal contact is presented. Prolonged open circuit voltage plots under UV light intensity are shown for stability and repeatability studies. I-V characteristics of ZnO/NiO heterostructure under the light wavelength from 623 nm to 365 nm are presented for energy efficient broadband optoelectronics.

| S-EPMC6598871 | biostudies-literature

Low-Temperature, Solution-Processed, Transparent Zinc Oxide-Based Thin-Film Transistors for Sensing Various Solvents.

Project description:A low temperature solution-processed thin-film transistor (TFT) using zinc oxide (ZnO) film as an exposed sensing semiconductor channel was fabricated to detect and identify various solution solvents. The TFT devices would offer applications for low-cost, rapid and highly compatible water-soluble detection and could replace conventional silicon field effect transistors (FETs) as bio-sensors. In this work, we demonstrate the utility of the TFT ZnO channel to sense various liquids, such as polar solvents (ethanol), non-polar solvents (toluene) and deionized (DI) water, which were dropped and adsorbed onto the channel. It is discussed how different dielectric constants of polar/non-polar solvents and DI water were associated with various charge transport properties, demonstrating the main detection mechanisms of the thin-film transistor.

| S-EPMC5503344 | biostudies-literature

Low temperature atomic layer deposition of zirconium oxide for inkjet printed transistor applications.

Project description:We report the growth of zirconium oxide (ZrO2) as a high-k gate dielectric for an inkjet-printed transistor using a low-temperature atomic layer deposition (ALD) from tetrakis(dimethylamido)zirconium (TDMAZr) and water precursors. All the samples are deposited at low-temperature ranges of 150-250 °C. The films are very uniform with RMS roughness less than 4% with respect to their thickness. The atomic force microscopy (AFM) shows a significant change in surface morphology from tapered posts to undulating mountain-like structures with several hundreds of ALD cycles. The results from X-ray diffraction (XRD) analysis exhibit an amorphous to the crystalline structure with temperature variation, which is independent of the thickness of the films. All our samples are hydrophilic as contact angles are less than 90°. The capacitance-voltage (C-V) and conductance-voltage (G p/ω-V) characteristics of ZrO2 dielectrics for silicon metal-oxide-semiconductor (MOS) capacitors are studied for different temperatures. For the n-type substrate MOS capacitors, the dielectric constants are estimated to be 7.5-11. Due to the low deposition temperature, a hydrophilic surface, and high k value, the ALD-ZrO2 dielectric can be compatible for printed transistors. The processes of fabrication and characterization of inkjet-printed graphene transistors is demonstrated using the ZrO2 dielectric. The possible solvents, surfactant, and the dielectric induced modifications in graphene flakes are demonstrated by Raman spectra. The graphene flakes spread uniformly on the ZrO2 surface. The functional inkjet-printed graphene transistor characteristics are demonstrated to illustrate the field effect behavior with the ALD-ZrO2 dielectric.

| S-EPMC9059772 | biostudies-literature

Study on room temperature gas-sensing performance of CuO film-decorated ordered porous ZnO composite by In2O3 sensitization.

Project description:For the first time, ordered mesoporous ZnO nanoparticles have been synthesized by a template method. The electroplating after chemical plating method was creatively used to form copper film on the surface of the prepared ZnO, and then a CuO film-decorated ordered porous ZnO composite (CuO/ZnO) was obtained by a high-temperature oxidation method. In2O3 was loaded into the prepared CuO film-ZnO by an ultrasonic-assisted method to sensitize the room temperature gas-sensing performance of the prepared CuO/ZnO materials. The doped In2O3 could effectively improve the gas-sensing properties of the prepared materials to nitrogen oxides (NO x ) at room temperature. The 1% In2O3 doped CuO/ZnO sample (1?wt% In2O3-CuO/ZnO) showed the best gas-sensing properties whose response to 100?ppm NO x reached 82%, and the detectable minimum concentration reached 1?ppm at room temperature. The prepared materials had a good selectivity, better response, very low detection limit, and high sensitivity to NO x gas at room temperature, which would have a great development space in the gas sensor field and a great research value.

| S-EPMC5830776 | biostudies-literature

Highly flexible transparent electrodes based on mesh-patterned rigid indium tin oxide.

Project description:We developed highly bendable transparent indium tin oxide (ITO) electrodes with a mesh pattern for use in flexible electronic devices. The mesh patterns lowered tensile stress and hindered propagation of cracks. Simulations using the finite element method confirmed that the mesh patterns decreased tensile stress by over 10% because of the escaped strain to the flexible film when the electrodes were bent. The proposed patterned ITO electrodes were simply fabricated by photolithography and wet etching. The resistance increase ratio of a mesh-patterned ITO electrode after bending 1000 times was at least two orders of magnitude lower than that of a planar ITO electrode. In addition, crack propagation was stopped by the mesh pattern of the patterned ITO electrode. A mesh-patterned ITO electrode was used in a liquid-based organic light-emitting diode (OLED). The OLED displayed the same current density-voltage-luminance (J-V-L) curves before and after bending 100 times. These results indicate that the developed mesh-patterned ITO electrodes are attractive for use in flexible electronic devices.

| S-EPMC5809474 | biostudies-literature

Transparent and conducting boron doped ZnO thin films grown by aerosol assisted chemical vapor deposition.

Project description:ZnO based transparent conducting oxides are important as they provide an alternative to the more expensive Sn : In2O3 that currently dominates the industry. Here, we investigate B-doped ZnO thin films grown via aerosol assisted chemical vapour deposition. B : ZnO films were produced from zinc acetate and triethylborane using either tetrahydrofuran or methanol (MeOH) as the solvent. The lowest resistivity of 5.1 × 10-3 Ω cm along with a visible light transmittance of ∼75-80% was achieved when using MeOH as the solvent. XRD analysis only detected the wurtzite phase of ZnO suggesting successful solid solution formation with B3+ substituting Zn2+ sites in the lattice. Refinement of the XRD patterns showed minimal distortion to the ZnO unit cell upon doping when MeOH was the solvent due to the immiscibility of the [BEt3] solution (1.0 M solution in hexane) in methanol that limited the amount of B going into the films, thus preventing excessive doping.

| S-EPMC9671099 | biostudies-literature

Direct synthesis of graphene on silicon oxide by low temperature plasma enhanced chemical vapor deposition.

Project description:Direct graphene growth on silicon with a native oxide using plasma enhanced chemical vapour deposition at low temperatures [550 °C-650 °C] is demonstrated for the first time. It is shown that the fine-tuning of a two-step synthesis with gas mixtures C2H2/H2 yields monolayer and few layer graphene films with a controllable domain size from 50 nm to more than 300 nm and the sheet resistance ranging from 8 k? sq-1 to less than 1.8 k? sq-1. Differences are understood in terms of the interaction of the plasma species - chiefly atomic H - with the deposited graphene and the native oxide layer. The proposed low temperature direct synthesis on an insulating substrate does not require any transfer processes and improves the compatibility with the current industrial processes.

| S-EPMC6130772 | biostudies-literature

Low-Cost One-Step Fabrication of Highly Conductive ZnO:Cl Transparent Thin Films with Tunable Photocatalytic Properties via Aerosol-Assisted Chemical Vapor Deposition.

Project description:Low-cost, high-efficiency, and high quality Cl-doped ZnO (ZnO:Cl) thin films that can simultaneously function as transparent conducting oxides (TCOs) and photocatalysts are described. The films have been fabricated by a facile and inexpensive solution-source aerosol-assisted chemical vapor deposition technique using NH4Cl as an effective, cheap, and abundant source of Cl. Successful ClO substitutional doping in the ZnO films was evident from powder X-ray diffraction, X-ray photoelectron spectroscopy, and time-of-flight secondary ion mass spectrometry results, while scanning electron microscopy reveals the impact of Cl doping on the ZnO thin film morphology. All ZnO:Cl films deposited were transparent and uncolored; optical transmittance in the visible region (400-700 nm) exceeded 80% for depositions using 5-20 mol % Cl. Optimal electrical properties were achieved when using 5 mol % Cl with a minimum measured resistivity of (2.72 ± 0.04) × 10-3 ?·cm, in which the charge carrier concentration and mobility were measured at (8.58 ± 0.16) × 1019 cm-3 and 26.7 ± 0.1 cm2 V-1 s-1 respectively, corresponding to a sheet resistance (R sh) of 41.9 ??-1 at a thickness of 650 nm. In addition to transparent conducting properties, photocatalytic behavior of stearic acid degradation in the ZnO:Cl films was also observed with an optimal Cl concentration of 7 mol % Cl, with the highest formal quantum efficiency (?) measured at (1.63 ± 0.03) × 10-4 molecule/photon, while retaining a visible transparency of 80% and resistivity ? = (9.23 ± 0.13) × 10-3 ?·cm. The dual functionality of ZnO:Cl as both a transparent conductor and an efficient photocatalyst is a unique combination of properties making this a particularly unusual material.

| S-EPMC7011732 | biostudies-literature

Comparative Study on ZnO Monolayer Doped with Al, Ga and In Atoms as Transparent Electrodes.

Project description:Transparent anodes are indispensable components for optoelectronic devices. Two-dimensional (2D) materials are attracting increasing research interest due to their unique properties and promising applications. In order to design novel transparent anodes, we investigated the electronic, optical, and electrical properties of 2D ZnO monolayers doped with Al, Ga, and In using the first-principles calculation in combination with the Boltzmann transport theory. When the doping concentration of Al, Ga, and In is less than 12.5 wt %, we find that the average transmittance reaches up to 99% in the visible and UV regions. Moreover, the electrical conductivity is enhanced for the Al, Ga, and In doped systems compared to that of the pristine ZnO monolayer. In particular, a good electrical conductivity with a significant improvement for the In doped ZnO monolayer is achieved compared to Al and Ga doping at the 6.25 wt % level. These results suggest that the ZnO monolayer based materials, and in particular the In doped ZnO monolayer, are promising transparent anodes for nanoscale electronic and optoelectronic applications.

| S-EPMC5551746 | biostudies-other