Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

In Situ Remediation of Phosphogypsum with Water-Washing Pre-Treatment Using Cemented Paste Backfill: Rheology Behavior and Damage Evolution.

ABSTRACT: The accumulation of original phosphogypsum (OPG) has occupied considerable land resources, which have induced significant environmental problems worldwide. The OPG-based cemented paste backfill (OCPB) has been introduced as a promising solution. In this study, a water-washing pre-treatment was used to purify OPG, aiming to optimize the transport performance and mechanical properties of backfills. The overall results proved that in treated phosphogypsum-based cemented paste backfill (TCPB), the altered particle size distribution can alleviate the shear-thinning characteristic. The mechanical properties were significantly optimized, of which a maximum increase of 183% of stress value was observed. With more pronounced AE signals, the TCPB samples demonstrated better residual structures after the ultimate strength values but with more unstable cracks with high amplitude generated during loading. Principal component analysis confirmed the adverse effects of fluorine and phosphorus on the damage fractal dimensions. The most voluminous hydration products observed were amorphous CSH and ettringite. The interlocked stellate clusters may be associated with the residual structure and the after-peak AE events evident in TCPB, indicate that more significant stress should be applied to break the closely interlocked stitches. Ultimately, the essential findings in this experimental work can provide a scientific reference for efficient OPG recycling.

SUBMITTER: Liu Y

PROVIDER: S-EPMC8618653 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Microscopic characterization and strength characteristics of cemented backfill under different humidity curing conditions.

Project description:Under different exploitive conditions, the humidity levels of the backfill stopes are not the same. Humidity greatly affects the strength and microscopic characterization of the backfill. Cemented paste backfill (CPB) specimens were cured using 0, 30, 70% and standard curing (20°C, 99%) under four different humidity conditions. At 28 days, nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM) techniques were used to obtain the microscopic features of the CPB specimens. The relationships between the permeability and uniaxial compressive strength (UCS) of the CPB specimens, and the microscopic characteristics of the CPB specimens, were established. The results showed the following: (i) The permeability of the CPB had an exponential functional relationship with its stone powder content. (ii) The stone powder content of CPB and the peak area of the T 2 spectrum are negatively correlated with the UCS. However, there was a T 2 peak area corresponding to the worst UCS with the same stone powder content. (iii) The peak area of the T 2 spectrum showed that the proportion of area of a small pore size was more than 80%, indicating that the pore size was mainly small. The pore diameter of small pores was linearly and inversely proportional to the UCS of the specimens. It can be found that the factors affecting the strength characteristics of CPB include not only the stone powder content, but also the curing conditions of different humidity.

| S-EPMC6936273 | biostudies-literature

Implementation of paste backfill mining technology in Chinese coal mines.

Project description:Implementation of clean mining technology at coal mines is crucial to protect the environment and maintain balance among energy resources, consumption, and ecology. After reviewing present coal clean mining technology, we introduce the technology principles and technological process of paste backfill mining in coal mines and discuss the components and features of backfill materials, the constitution of the backfill system, and the backfill process. Specific implementation of this technology and its application are analyzed for paste backfill mining in Daizhuang Coal Mine; a practical implementation shows that paste backfill mining can improve the safety and excavation rate of coal mining, which can effectively resolve surface subsidence problems caused by underground mining activities, by utilizing solid waste such as coal gangues as a resource. Therefore, paste backfill mining is an effective clean coal mining technology, which has widespread application.

| S-EPMC4165384 | biostudies-other

Numerical Validation of a Population Balance Model Describing Cement Paste Rheology.

Project description:Rheology control is essential during the period in which cement and concrete pastes are encountered in the fresh state, due to the fact that it directly affects workability, initial placement and the structural performance of the hardened material. Optimizations of clinker formulations and reductions in cement-to-water ratios induced by economic and environmental considerations have a significant effect in rheology, which invokes the need for mechanistic models capable of describing the effect of multiple relevant phenomena on the observed paste flow. In this work, the population balance framework was implemented to develop a model able to relate the transient microstructural evolution of cement pastes under typical experimental conditions with its macroscopic rheological responses. Numerical details and performance are assessed and discussed. It was found that the model is capable of reproducing experimentally observed flow curves by using measured cluster size distribution information. It is also able to predict the complex rheological characteristics typically found in cement pastes. Furthermore, a spatially resolved scheme was proposed to investigate the nature of flow inside a parallel-plates rheometer geometry with the objective of assessing the ability of the model of qualitatively predicting experimentally observed behavior and to gain insight into the effect of possible secondary flows.

| S-EPMC7085096 | biostudies-literature

New-Generation Washing Agents in Remediation of Metal-Polluted Soils and Methods for Washing Effluent Treatment: A Review.

Project description:Soil quality is seriously reduced due to chemical pollution, including heavy metal (HM) pollution. To meet quality standards, polluted soils must be remediated. Soil washing/soil flushing offers efficient removal of heavy metals and decreases environmental risk in polluted areas. These goals can be obtained by using proper washing agents to remove HMs from soil. These washing agents should not pose unacceptable threats to humans and ecosystems, including soil composition. Currently, it is desirable to use more environmentally and economically attractive washing agents instead of synthetic, environmentally problematic chemicals (e.g., ethylenediaminetetraacetic acid (EDTA)). The usefulness of novel washing agents for treatment of heavy metal-contaminated soils is being intensively developed, in terms of the efficiency of HM removal and properties of washed soils. Despite the unquestionable effectiveness of soil washing/flushing, it should be remembered that both methods generate secondary fluid waste (spent washing solution), and the final stage of the process should be treatment of the contaminated spent washing solution. This paper reviews information on soil contamination with heavy metals. This review examines the principles and status of soil washing and soil flushing. The novel contribution of this review is a presentation of the sources and characteristics of novel washing agents and chemical substitutes for EDTA, with their potential for heavy metal removal. Methods for treating spent washing solution are discussed separately.

| S-EPMC7503436 | biostudies-literature

Remediation of nitrobenzene contaminated soil by combining surfactant enhanced soil washing and effluent oxidation with persulfate.

Project description:The combination of surfactant enhanced soil washing and degradation of nitrobenzene (NB) in effluent with persulfate was investigated to remediate NB contaminated soil. Aqueous solution of sodium dodecylbenzenesulfonate (SDBS, 24.0 mmol L-1) was used at a given mass ratio of solution to soil (20:1) to extract NB contaminated soil (47.3 mg kg-1), resulting in NB desorption removal efficient of 76.8%. The washing effluent was treated in Fe2+/persulfate and Fe2+/H2O2 systems successively. The degradation removal of NB was 97.9%, being much higher than that of SDBS (51.6%) with addition of 40.0 mmol L-1 Fe2+ and 40.0 mmol L-1 persulfate after 15 min reaction. The preferential degradation was related to the lone pair electron of generated SO4•-, which preferably removes electrons from aromatic parts of NB over long alkyl chains of SDBS through hydrogen abstraction reactions. No preferential degradation was observed in •OH based oxidation because of its hydrogen abstraction or addition mechanism. The sustained SDBS could be reused for washing the contaminated soil. The combination of the effective surfactant-enhanced washing and the preferential degradation of NB with Fe2+/persulfate provide a useful option to remediate NB contaminated soil.

| S-EPMC4534389 | biostudies-literature

Optimization of aeration enhanced surfactant soil washing for remediation of diesel-contaminated soils using response surface methodology.

Project description:Surfactant-enhanced soil washing has been used for remediation of organic pollutants for an extended period, but its effectiveness and wide application was limited by the high concentration of surfactants utilized. In this work, the efficiency of conventional soil washing performance was enhanced by 12-25% through the incorporation of air bubbles into the low concentration surfactant soil washing system. Surfactant selection pre-experiment using aerated and conventional soil washing reveals Brij 35 > TX100 > Tween 80 > Saponin in diesel oil removal. Optimization of the effect of time, surfactant concentration, pH, agitation speed, and airflow rate in five levels were undertaken using Response Surface Methodology and Central composite design. The optimum degree of variables achieved was 90 min of washing time, 370 mg/l of concentration, washing pH of 10,535 rpm of agitation speed and 7.2 l/min of airflow rate with 79.5% diesel removal. The high predicted R 2 value of 0.9517 showed that the model could efficiently be used to predict diesel removal efficiency. The variation in efficiency of aeration assisted and conventional soil washing was variable depending on the type of surfactant, organic matter content of the soil, particle size distribution and level of pollutant weathering. The difference in removal efficiency of the two methods increases when the level of organic matter increases and when the particle size and age of contamination decreases.

| S-EPMC7024577 | biostudies-literature

Ultrasound-assisted soil washing processes for the remediation of heavy metals contaminated soils: The mechanism of the ultrasonic desorption.

Project description:Ultrasound-assisted soil washing processes were investigated for the removal of heavy metals (Cu, Pb, and Zn) in real contaminated soils using HCl and EDTA. The ultrasound-assisted soil washing (US/Mixing) process was compared with the conventional soil washing (Mixing) process based on the mechanical mixing. High removal efficiency (44.8% for HCl and 43.2% for EDTA) for the metals was obtained for the most extreme conditions (HCl 1.0 M or EDTA 0.1 M and L:S = 10:1) in the Mixing process. With the aide of ultrasound, higher removal efficiency (57.9% for HCl and 50.0% for EDTA) was obtained in the same extreme conditions and similar or higher removal efficiency (e.g., 54.7% for HCl 0.5 M and L:S = 10:1 and 50.5% for EDTA 0.05 M and L:S = 5:1) was achieved even in less extreme conditions (lower HCl or EDTA concentration and L:S ratio). Therefore, it was revealed that the US/Mixing was advantageous over the conventional Mixing processes in terms of metal removal efficiency, consumption of chemicals, amount of generated washing leachate, and volume/size of washing reactor. In addition, the heavy metals removal was enhanced for the smaller soil particles in the US/Mixing process. It was due to more violent movement of smaller particles in slurry phase and more violent sonophysical effects. In order to understand the mechanism of ultrasonic desorption, the desorption test was conducted using the paint-coated beads with three sizes (1, 2, and 4 mm) for the free and attached conditions. It was found that no significant desorption/removal of paint from the beads was observed without the movement of beads in the water including floatation, collision, and scrubbing. Thus, it was suggested that the simultaneous application of the ultrasound and mechanical mixing could enhance the physical movement of the particles significantly and the very high removal/desorption could be attained.

| S-EPMC8122358 | biostudies-literature

Effect of Pre-Shear on Agglomeration and Rheological Parameters of Cement Paste.

Project description:Cementitious pastes are multiphase suspensions that are rheologically characterized by viscosity and yield stress. They tend to flocculate during rest due to attractive interparticle forces, and desagglomerate when shear is induced. The shear history, e.g., mixing energy and time, determines the apparent state of flocculation and accordingly the particle size distribution of the cement in the suspension, which itself affects suspension's plastic viscosity and yield stress. Thus, it is crucial to understand the effect of the mixing procedure of cementitious suspensions before starting rheological measurements. However, the measurement of the in-situ particle agglomeration status is difficult, due to rapidly changing particle network structuration. The focused beam reflectance measurement (FBRM) technique offers an opportunity for the in-situ investigation of the chord length distribution. This enables to detect the state of flocculation of the particles during shear. Cementitious pastes differing in their solid fraction and superplasticizer content were analyzed after various pre-shear histories, i.e., mixing times. Yield stress and viscosity were measured in a parallel-plate-rheometer and related to in-situ measurements of the chord length distribution with the FBRM-probe to characterize the agglomeration status. With increasing mixing time agglomerates were increasingly broken up in dependence of pre-shear: After 300 s of pre-shear the agglomerate sizes decreased by 10 µm to 15 µm compared to a 30 s pre-shear. At the same time dynamic yield stress and viscosity decreased up to 30% until a state of equilibrium was almost reached. The investigations show a correlation between mean chord length and the corresponding rheological parameters affected by the duration of pre-shear.

| S-EPMC7254339 | biostudies-literature

Novel, Activated Carbon-Based Material for in-Situ Remediation of Contaminated Sediments.

Project description:Applying activated carbon (AC) to contaminated sediments is an in-situ approach to remediation with great potential. The bioavailability of persistent organic pollutants can be rapidly reduced and kept low over long periods of time. However, there are limitations to the method. The high buoyancy of AC particles makes their application difficult in the field, and AC retention on the amended site can be low in turbulent waters. Furthermore, the fine particles of powdered AC (PAC) can have adverse effects on organisms, but their remediation potential is superior to coarser, granular ACs (GAC). To tackle these shortcomings, a novel sorbent material was developed, consisting of PAC embedded into a stable, granular clay-matrix, significantly reducing buoyancy. These AC-clay granules (ACC-G) were tested for remediation potential (PCB-bioaccumulation reduction) and adverse effects on the benthic invertebrates Chironomus riparius and Lumbriculus variegatus. The novel ACC-G material was compared to GAC of the same particle size, the clay-matrix, and PAC. The findings show that ACC-G has a significantly higher remediation potential than GAC, allowing for reductions in PCB-bioaccumulation of up to 89%. Adverse effects could not be totally eliminated with ACC-G, but they were less severe than with PAC, likely due to the increased particle size.

| S-EPMC6727589 | biostudies-literature

Rare-Earth Elements as Natural Tracers for In Situ Remediation of Groundwater.

Project description:The utility of rare-earth elements (REEs) as natural geochemical tracers for the analysis of groundwater remediation was examined in several example permeable reactive barriers (PRBs). The PRBs utilize zero-valent iron and organic carbon plus limestone mixtures for contaminant treatment. Zero-valent iron removed REEs from groundwater to below detection levels (2-4 ng/L) and subsequent rebound of REE concentrations in regions down-gradient of the treatment zones was not observed. In addition, REE concentrations within and down-gradient of an organic carbon/limestone PRB were significantly reduced to <1% of influent levels. Thus, REEs are sensitive tracers for evaluating the interaction of groundwater with materials placed in the subsurface for contaminant remediation. Analysis of geochemical tracers for understanding in situ remediation becomes important in situations where down-gradient contaminant concentrations fail to decrease within expected timeframes. The field data indicated that increased solid-phase partitioning of REEs occurred with increasing pH and heavy REEs were preferentially removed compared to light REEs in ZVI systems. In the organic carbon PRB, unexpected negative europium anomalies were observed, revealing new information about redox conditions within the treatment zone. REE concentrations and shale-normalized profiles can be used as natural tracers to better understand in situ technologies for groundwater remediation.

| S-EPMC7868090 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data