Browse
Submit Data
Databases
API
Help

Dataset Information

26 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Fluorescence Enhanced Optical Resonator Constituted of Quantum Dots and Thin Film Resonant Cavity for High-Efficiency Reflective Color Filter.

ABSTRACT: Conventional color filters selectively absorb a part of the backlight while reflecting or transmitting other light, resulting in the problem of low efficiency and energy wasting. For this problem, a new concept of fluorescence enhanced optical resonator was proposed and verified in this paper. The new structure consists of structural color filter and light-conversion material. Specially, a thin film resonant cavity was designed, and InP/ZnSe/ZnS quantum dots were inserted inside the resonator. When illuminated by sunlight, the novel fluorescence enhanced optical resonator could not only reflect the specific light, but also convert absorbed energy into desired light, leading to the utilization efficiency improvement of solar energy. An all-dielectric red fluorescence enhanced optical resonator was fabricated, with peak equivalent reflectance up to 105%. Compared with a thin film resonator, the enhancement coefficient of the as-proposed structure is about 124%. The new optical structure can utilize solar source efficiently, showing application potential as the next generation of reflective color filters for display.

SUBMITTER: Chen X

PROVIDER: S-EPMC8619847 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Structured metal thin film as an asymmetric color filter: the forward and reverse plasmonic halos.

Project description:We observe asymmetric color filtering under unpolarized incidence in a structured metallic (Ag) film, where the center of an optically thick circular Ag disk surrounded by a step gap appears dark when observed from one side, and bright from the other. The latter situation corresponds to abnormally high optical transmission through the optically thick film. We explain this by a three-step process: coupling of photons to surface plasmon polaritons (SPPs), wave interference of SPPs forming resonant cavity modes, and out-coupling from SPPs to photons. Full wave electromagnetic simulations based on the finite element method support our findings. These results may have potential applications in areas such as optical color filtering and biosensing via dielectric detection within the step gap plasmonic cavity.

| S-EPMC4248275 | biostudies-other

Highly conductive and flexible color filter electrode using multilayer film structure.

Project description:In this paper, a high performance flexible component that serves as a color filter and an electrode simultaneously is suggested. The suggested highly conductive and flexible color filter electrode (CFE) has a multilayer film structure composed of silver (Ag) and tungsten trioxide (WO3). The CFE maintained its color filtering capability even when the films were bent on a polyethylene terephthalate (PET) film. Low sheet resistance of the CFE was obtained using WO3 as a bridge layer that connects two Ag layers electrically. The sheet resistance was less than 2??/sq. and it was negligibly changed after bending the film, confirming the flexibility of the CFE. The CFE can be easily fabricated using a thermal evaporator and is easily patterned by photolithography or a shadow mask. The proposed CFE has enormous potential for applications involving optical devices including large area devices and flexible devices.

| S-EPMC4931689 | biostudies-literature

Resonant cavity phosphor.

Project description:While phosphors play an immensely important role in solid-state lighting and full-colour displays, it has been noted lately that their performance can be largely improved via structural engineering. Here, phosphor material is synergistically merged with yet another structurally engineered platform, resonant cavity (RC). When a 40-nm-thick colloidal quantum dot (CQD) film is embedded in a tailored RC with a moderate cavity quality factor (Q ≈ 90), it gains the ability to absorb the majority (~87%) of excitation photons, resulting in significantly enhanced CQD fluorescence (~29×) across a reasonably broad linewidth (~13 nm). The colour gamut covered by red and green pixels implemented using the RC phosphor-along with a broad bandwidth (~20 nm) blue excitation source-exceeds that of the sRGB standard (~121%). The simple planar geometry facilitates design and implementation of the RC phosphor, making it promising for use in real applications.

| S-EPMC10589315 | biostudies-literature

Improving light absorption and photoelectrochemical performance of thin-film photoelectrode with a reflective substrate.

Project description:The charge separation/transport efficiency is relatively high in thin-film hematite photoanodes in which the distance for charge transport is short, but simultaneously the high loss of light absorption due to transmission is confronted. To increase light absorption in thin-film Fe2O3:Ti, commercial substrates such as Cu foil, Ag foil, and a mirror are adopted acting as back-reflectors and individually integrated with the Fe2O3:Ti electrode. The promotion effect of the commercial back-reflectors on the light absorption efficiency and photoelectrochemical (PEC) performance of the hydrothermally prepared Fe2O3:Ti electrodes with a variety of film thicknesses is investigated. As a result, Ag foil and the mirror show favorable and equal efficacy while the promoting effect of Cu foil is limited. In addition, the photocurrent increment achieved by the Ag back-reflector decreases linearly along with the logarithmic of the film thickness and the optimized film thickness of the Fe2O3:Ti electrode is decreased from 520 to 290 nm. The high durability of Ag foil in the alkaline electrolyte during solar light irradiation is demonstrated. Furthermore, the reflective substrate also shows a promotion effect on the BiVO4 photoanode and CuBi2O4 photocathode, as well as the unbiased photocurrent from a tandem cell constituted by TiO2 and CuBi2O4.

| S-EPMC9031256 | biostudies-literature

Reflective color filter with precise control of the color coordinate achieved by stacking silicon nanowire arrays onto ultrathin optical coatings.

Project description:The engineering of structural colors is currently a promising, rapidly emerging research field because structural colors of outstanding spatial resolution and durability can be generated using a sustainable production method. However, the restricted and saturated color range in micro/nano-fabricated structural 'pigments' has hindered the dissemination of structural color printing. Here, this article presents a spectral mixing color filter (SMCF), which is the concept of fine-tunable color systems, capable of addressing the current issues in structural color engineering, by stacking a vertical silicon nanowire array embedded in a transparent polymer onto ultrathin optical coating layers. These two photonic structures enable independent tuning the optical resonance of each structure, depending on geometrical parameters, such as the diameter of nanowires and thickness of absorbing medium. Hence, the SMCF facilitates the linear combination of two resonant spectra, thereby enabling fine-tuning and widening of the color gamut. Theoretical studies and experimental results reveal the detailed working mechanisms and extraordinary mechanical feature of the SMCF. Based on the analyses, the concept of flexible optical device, e.g., a reflective anti-counterfeiting sticker, is demonstrated. Successful characterization demonstrates that the proposed strategy can promote the color controllability/purity of structural color and the applicability as flexible optical device.

| S-EPMC6399234 | biostudies-literature

Narrowband and flexible perfect absorber based on a thin-film nano-resonator incorporating a dielectric overlay.

Project description:We developed a flexible perfect absorber based on a thin-film nano-resonator, which consists of metal-dielectric-metal integrated with a dielectric overlay. The proposed perfect absorber exhibits a high quality (Q-)factor of ~ 33 with a narrow bandwidth of ~ 20 nm in the visible band. The resonance condition hinging on the adoption of a dielectric overlay was comprehensively explored by referring to the absorption spectra as a function of the wavelength and thicknesses of the overlay and metal. The results verified that utilizing a thicker metal layer improved the Q-factor and surface smoothness, while the presence of the overlay allowed for a relaxed tolerance during practical fabrication, in favor of high fidelity with the design. The origin of the perfect absorption pertaining to zero reflection was elucidated by referring to the optical admittance. We also explored a suite of perfect absorbers with varying thicknesses. An angle insensitive performance, which is integral to such a flexible optical device, was experimentally identified. Consequently, the proposed thin-film absorber featured an enhanced Q-factor in conjunction with a wide angle of acceptance. It is anticipated that our absorber can facilitate seminal applications encompassing advanced sensors and absorption filtering devices geared for smart camouflage and stealth.

| S-EPMC7576172 | biostudies-literature

Omni-resonant optical micro-cavity.

Project description:Optical cavities transmit light only at discrete resonant frequencies, which are well-separated in micro-structures. Despite attempts at the construction of planar 'white-light cavities', the benefits accrued upon optically interacting with a cavity - such as resonant field buildup - have remained confined to narrow linewidths. Here, we demonstrate achromatic optical transmission through a planar Fabry-Pérot micro-cavity via angularly multiplexed phase-matching that exploits a bio-inspired grating configuration. By correlating each wavelength with an appropriate angle of incidence, a continuous spectrum resonates and the micro-cavity is rendered transparent. The locus of a single-order 0.7-nm-wide resonance is de-slanted in spectral-angular space to become a 60-nm-wide achromatic resonance spanning multiple cavity free-spectral-ranges. The result is an 'omni-resonant' planar micro-cavity in which light resonates continuously over a broad spectral span. This approach severs the link between the resonance bandwidth and the cavity-photon lifetime, thereby promising resonant enhancement of linear and nonlinear optical effects over broad bandwidths in ultrathin devices.

| S-EPMC5583348 | biostudies-literature

High-purity reflective color filters based on thin film cavities embedded with an ultrathin Ge2Sb2Te5 absorption layer.

Project description:A thin film cavity formed by stacking metal-insulator-metal (MIM) continuous layers is of significant interest as a lithography-free and scalable color-filtering structure. Such a cavity can selectively transmit a certain frequency range of incident light, thus producing vivid transmission colors. However, the generation of reflection colors with high purity and reflectivity is a challenge because a cavity in reflection mode resonantly absorbs a narrow range of wavelengths and reflects the remaining spectrum. This study shows that highly pure and reflective colors can be obtained by embedding an ultrathin Ge2Sb2Te5 layer within the cavity. Because the MIM structure exhibits a nonuniform intensity distribution across the insulator layer, the approach is to place the Ge2Sb2Te5 layer in a high-intensity region within the insulator and thereby create another absorption band in addition to the cavity resonance mode. When combined with the refractive-index engineering of the metal layer, this approach leads to red, green, and blue colors having a bandwidth of ∼100 nm and a reflection efficiency of 90%. The results of the study may be effectively utilized in numerous applications, including reflective color filters, colorimetric sensors, and surface decorations.

| S-EPMC9418997 | biostudies-literature

Thin-film optical notch filter spectacle coatings for the treatment of migraine and photophobia.

Project description:Previous evidence suggests optical treatments hold promise for treating migraine and photophobia. We designed an optical notch filter, centered at 480nm to reduce direct stimulation of intrinsically photosensitive retinal ganglion cells. We used thin-film technology to integrate the filter into spectacle lenses. Our objective was to determine if an optical notch filter, designed to attenuate activity of intrinsically photosensitive retinal ganglion cells, could reduce headache impact in chronic migraine subjects. For this randomized, double-masked study, our primary endpoint was the Headache Impact Test (HIT-6; GlaxoSmithKline, Brentford, Middlesex, UK). We developed two filters: the therapeutic filter blocked visible light at 480nm; a 620nm filter was designed as a sham. Participants were asked to wear lenses with one of the filters for 2weeks; after 2weeks when no lenses were worn, they wore lenses with the other filter for 2weeks. Of 48 subjects, 37 completed the study. Wearing either the 480 or 620nm lenses resulted in clinically and statistically significant HIT-6 reductions. However, there was no significant difference when comparing overall effect of the 480 and 620nm lenses. Although the 620nm filter was designed as a sham intervention, research published following the trial indicated that melanopsin, the photopigment in intrinsically photosensitive retinal ganglion cells, is bi-stable. This molecular property may explain the unexpected efficacy of the 620nm filter. These preliminary findings indicate that lenses outfitted with a thin-film optical notch filter may be useful in treating chronic migraine.

| S-EPMC5510464 | biostudies-literature

Conductivity Extraction Using a 180 GHz Quasi-Optical Resonator for Conductive Thin Film Deposited on Conductive Substrate.

Project description:Measurement of electrical conductivity of conductive thin film deposited on a conductive substrate is important and challenging. An effective conductivity model was constructed for a bilayer structure to extract thin film conductivity from the measured Q-factor of a quasi-optical resonator. As a demonstration, aluminium films with thickness of 100 nm were evaporated on four silicon wafers whose conductivity ranges from ~101 to ~105 S/m (thus, the proposed method can be verified for a substrate with a wide range of conductivity). Measurement results at ~180 GHz show that average conductivities are 1.66 × 107 S/m (which agrees well with direct current measurements) with 6% standard deviation. The proposed method provides a contactless conductivity evaluation method for conductive thin film deposited on conductive substrate which cannot be achieved by the existing microwave resonant method.

| S-EPMC7699854 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data