Marginal Bone Loss around Implants with Internal Hexagonal and Internal Conical Connections: A 12-Month Randomized Pilot Study.
Ontology highlight
ABSTRACT:
SUBMITTER: Galindo-Moreno P
PROVIDER: S-EPMC8621760 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:The vertical position concerning the bone in which the implants are placed has been related as one of the factors causing marginal bone loss. The objective of this study was to evaluate the bone loss that occurs before prosthetic loading around tapered internal connection (CIC) implants placed at the crestal (C) and subcrestal (S) levels.MethodA randomized clinical trial (RCT) was carried out, with a sample size of 62 implants placed in 27 patients who underwent radiological controls on the day of placement, at one month, and at 4 months, and stability was measured by resonance frequency analysis (RFA) on three occasions.ResultsBone loss in implants C and S from the time of placement (T0) and the month after (T1) was not significant (p = 0.54) (C = 0.19 mm and S = 0.15 mm). The difference between one month (T1) and four months (T2) (C = 0.17 mm and S = 0.22 mm) was not significant either (p = 0.26). The difference between the day of placement (T0) and the third and last measurement (T2) was almost null (p = 0.94) (C = 0.35 mm and S = 0.36). The overall success rate of the implants was 97.8%. The stability of the implants measured with RFA went from 70.60 (T0) to 73.16 (T1) and 74.52 (T2).ConclusionsNo significant differences were found in the bone loss for implants placed at the C and S levels. The millimeters of bone loss detected in both vertical positions did not have a significant impact on the stability of the implants.
| S-EPMC9145780 | biostudies-literature
Project description:Marginal bone loss during bone healing exists around non-submerged dental implants. The aim of this study was to identify the relationship between different degrees of marginal bone loss during bone healing and the salivary microbiome. One hundred patients were recruited, and marginal bone loss around their implants was measured using cone beam computed tomography during a 3-month healing period. The patients were divided into three groups according to the severity of marginal bone loss. Saliva samples were collected from all subjected and were analysed using 16S MiSeq sequencing. Although the overall structure of the microbial community was not dramatically altered, the relative abundance of several taxonomic groups noticeably changed. The abundance of species in the phyla Spirochaeta and Synergistetes increased significantly as the bone loss became more severe. Species within the genus Treponema also exhibited increased abundance, whereas Veillonella, Haemophilus and Leptotrichia exhibited reduced abundances, in groups with more bone loss. Porphyromonasgingivalis, Treponemadenticola and Streptococcus intermedius were significantly more abundant in the moderate group and/or severe group. The severity of marginal bone loss around the non-submerged implant was associated with dissimilar taxonomic compositions. An increased severity of marginal bone loss was related to increased proportions of periodontal pathogenic species. These data suggest a potential role of microbes in the progression of marginal bone loss during bone healing.
| S-EPMC5518974 | biostudies-literature
Project description:Although neurophysiological and psychophysical proof of osseoperception is accumulating, histomorphometric evidence for the neural mechanisms of functional compensation following immediate and delayed implant loading is still lacking. For this randomized split-mouth study, six mongrel dogs randomly received one of four treatment protocols at 36 implant-recipient sites over 16 weeks (third maxillary incisor, third and fourth mandibular premolar): immediate implant placement and immediate loading (IIP+IL); delayed implant placement and delayed loading (DIP+DL); delayed implant placement and immediate loading (DIP+IL); and natural extraction socket healing (control). Histomorphometry was performed in the peri-implant bone and soft tissues within 300 µm around the implants. Immunocytochemistry and transmission electron microscopy were used to confirm the presence of neural structures and to reveal their ultrastructural characteristics, respectively. Myelinated nerve fibres densely populated the peri-implant crestal gingival and apical regions, although they were also identified in the woven bone and in the osteons near the implant threads. Compared with the control group in the mandible, the group that received IIP+IL showed a higher innervation (in N⋅mm⁻², 5.94 ± 1.12 vs. 3.15 ± 0.63, P<0.001) and smaller fibre diameter (in µm, 1.37 ± 0.05 vs. 1.64 ± 0.13, P=0.016), smaller axon diameter (in µm, 0.89 ± 0.05 vs. 1.24 ± 0.10, P=0.009) and g-ratio (0.64 ± 0.04 vs. 0.76 ± 0.05, P<0.001) in the middle region around the implants. Compared with DIP+IL in the mandible, IIP+IL had a higher nerve density (in N⋅mm⁻², 13.23 ± 2.54 vs. 9.64 ± 1.86, P=0.027), greater fibre diameter (in µm, 1.32 ± 0.02 vs. 1.20 ± 0.04, P=0.021), greater axon diameter (in µm, 0.92 ± 0.01 vs. 0.89 ± 0.03, P=0.035) and lower g-ratio (0.69 ± 0.01 vs. 0.74 ± 0.01, P=0.033) in the apical region around the implants. It may be assumed that the treatment protocol with IIP+IL is the preferred method to allow optimized peri-implant re-innervation, but further functional measurements are still required.
| S-EPMC4817539 | biostudies-literature
Project description:Early marginal bone loss (MBL) is a non-infective remodeling process of variable entity occurring within the first year after implant placement. It has a multifactorial etiology, being influenced by both surgical and prosthetic factors. Their impact remains a matter of debate, and controversial information is available, particularly regarding implants placed subcrestally. The present multicenter prospective clinical study aimed to correlate marginal bone loss around platform-switched implants with conical connection inserted subcrestally to general and local factors. Fifty-five patients were enrolled according to strict inclusion/exclusion criteria by four clinical centers. Single or multiple implants (AnyRidge, MegaGen, South Korea) were inserted in the posterior mandible with a one-stage protocol. Impressions were taken after two months of healing (T1), screwed metal-ceramic restorations were delivered three months after implant insertion (T2), and patients were recalled after six months (T3) and twelve months (T4) of prosthetic loading. Periapical radiographs were acquired at each time point. Bone levels were measured at each time point on both mesial and distal aspects of implants. Linear mixed models were fitted to the data to identify predictors associated with MBL. Fifty patients (25 male, 25 female; mean age 58.0 ± 12.8) with a total of 83 implants were included in the final analysis. The mean subcrestal position of the implant shoulder at baseline was 1.24 ± 0.57 mm, while at T4, it was 0.46 ± 0.59 mm under the bone level. Early marginal bone remodeling was significantly influenced by implant insertion depth and factors related to biological width establishment (vertical mucosal thickness, healing, and prosthetic abutment height). Deep implant insertion, thin peri-implant mucosa, and short abutments were associated with greater marginal bone loss up to six months after prosthetic loading. Peri-implant bone levels tended to stabilize after this time, and no further marginal bone resorption was recorded at twelve months after implant loading.
| S-EPMC6723035 | biostudies-literature
Project description:IntroductionSustained, developmentally adverse experiences in childhood put survivors at risk for posttraumatic stress disorder and impairments in biological, affective, cognitive, and intra/interpersonal domains. Complex trauma symptoms are often treated in isolation without addressing their common root cause. The trauma-focused phased Complex Trauma Care Pathway (CTCP) was developed to address this care gap.MethodsWe piloted the CTCP in 2 medical centers for 12 months among 46 therapist-referred adults. Outcome measures collected every 3 months included standardized scales assessing anxiety, depression, suicidal thoughts, and disorders of extreme stress not otherwise specified (DESNOS).ResultsStatistically significant improvements occurred in mean scores for anxiety (p = 0.003), total DESNOS scores (p < 0.001), and 5 DESNOS domains: alterations in regulation of affect and impulses, alterations in regulation of attention or consciousness, alterations in self-perception, alterations in relationships with others (p < 0.001 for all), and alterations in systems of meaning (p = 0.006). In contrast, decreases in symptoms of somatization, depression, substance use, and suicidal thoughts were not statistically significant. Participant feedback was very positive.DiscussionMany trials evaluate phased interventions for posttraumatic stress disorder, but much less evidence exists about effective interventions for complex trauma. Our study fills a knowledge gap.ConclusionThe CTCP shows promising clinical efficacy and should be evaluated using a more rigorous design. Further research should also explore the relationship between the CTCP or similar interventions and chronic disease management, overall healthcare utilization, and suicide risk.
| S-EPMC8817937 | biostudies-literature
Project description:PurposeSlice encoding for metal artifact correction acquires a three-dimensional image of each excited slice with view-angle tilting to reduce slice and readout direction artifacts respectively, but requires additional imaging time. The purpose of this study was to provide a technique for faster imaging around metallic implants by undersampling k-space.MethodsAssuming that areas of slice distortion are localized, hexagonal sampling can reduce imaging time by 50% compared with conventional scans. This work demonstrates this technique by comparisons of fully sampled images with undersampled images, either from simulations from fully acquired data or from data actually undersampled during acquisition, in patients and phantoms. Hexagonal sampling is also shown to be compatible with parallel imaging and partial Fourier acquisitions. Image quality was evaluated using a structural similarity (SSIM) index.ResultsImages acquired with hexagonal undersampling had no visible difference in artifact suppression from fully sampled images. The SSIM index indicated high similarity to fully sampled images in all cases.ConclusionThe study demonstrates the ability to reduce scan time by undersampling without compromising image quality.
| S-EPMC4156560 | biostudies-literature
Project description:Background. The present study was conducted to investigate the marginal bone loss around two different types of implant‒abutment junctions, called platform-switched (Implantium system) and non-platform switched (XiVE system) after two years of loading. Methods. Sixty-four implants in 49 patients were included in the study. The implants were placed in the posterior mandibular region according to the relevant protocols. The extent of bone loss around the implants was measured and compared after 24 months, using digital parallel periapical radiographs. Results. The means ± SE of bone loss values in the platform-switched and non-platform-switched groups were 0.47 ± 0.048 mm and 1.87 ± 0.124 mm, respectively. The difference between the two groups was statistically significant (P < 0.0001). Conclusion . The platform-switching technique seems to reduce the periimplant crestal bone resorption, which supports the long-term predictability of implant therapy.
| S-EPMC5390122 | biostudies-other
Project description:ObjectiveDuring the insertion of dental implants in the bone tissue, different torque values can be applied. However, the high applied torque can cause damage to the implant connection. Our study sought to evaluate, by measuring the angle of rotation of the insertion drive and, later microscopic observation, possible changes in the structure of implants of different diameters with 3 different types of connections after the application of 4 different torque intensities.Materials and methodsThree hundred tapered dental implants and three hundred insertion drivers were used in the present study. Implants of 3.5 and 4 mm in diameter with 3 connection models were tested: external hexagon (EH), internal hexagon (IH) and Morse taper (MT). Then, sis groups were performed: EH3 group, EH4 group, IH3 group, IH4 group, MT3 group and MT4 group. The samples were submitted to the torque/torsion force at 4 intensities (n = 10 samples per group and intensity): 60, 80, 100 and 120 Ncm. The turning angle of the insertion driver was measured in each test. In addition, in 10 samples from each group, the maximum torque value supported by each implant model was measured. After the tests, all samples were inspected microscopically to describe the observed changes.ResultsThe maximum torque supported by the different implant models showed statistically significant difference (p < 0.0001). The values of the measured angles showed statistically significant differences between the torque values applied within each group (p < 0.001) and between groups with the same torque value (p < 0.001).ConclusionsWithin the limitations of the present study in vitro, the results showed that high torque values cause mechanical damage to the implants.
| S-EPMC8133438 | biostudies-literature
Project description:BACKGROUND:The aim of the present study was to compare, in low-density polyurethane blocks, the primary implant stability values (micromobility) and removal torque values of three different implant geometries in two different bone densities representing the structure of the human posterior jaws. METHODS:A total of 60 implants were used in the present investigation: twenty implants for each of three groups (group A, group B, and group C), in both polyurethane 10 pcf and 20 pcf densities. The insertion torque, pull-out torque, and implant stability quotient (ISQ) values were obtained. RESULTS:No differences were found in the values of Group A and Group B implants. In both these groups, the insertion torques were quite low in the 10 pcf blocks. Better results were found in the 20 pcf blocks, which showed very good stability of the implants. The pull-out values were slightly lower than the insertion torque values. High ISQ values were found in Group A and B implants. Lower values were present in Group C implants. CONCLUSIONS:The present investigation evaluated implants with different geometries that are available on the market, and not experimental implants specifically created for the study. The authors aimed to simulate real clinical conditions (poor-density bone or immediate post-extraction implants) in which knowledge of dental implant features, which may be useful in increasing the primary stability, may help the oral surgeon during the surgery planning.
| S-EPMC7216137 | biostudies-literature
Project description:BackgroundNumerous clinical variables may influence early marginal bone loss (EMBL), including surgical, prosthetic and host-related factors. Among them, bone crest width plays a crucial role: an adequate peri-implant bone envelope has a protective effect against the influence of the aforementioned factors on marginal bone stability. The aim of the present study was to investigate the influence of buccal and palatal bone thickness at the time of implant placement on EMBL during the submerged healing period.MethodsPatients presenting a single edentulism in the upper premolar area and requiring implant-supported rehabilitation were enrolled following inclusion and exclusion criteria. Internal connection implants (Twinfit, Dentaurum, Ispringen, Germany) were inserted after piezoelectric implant site preparation. Mid-facial and mid-palatal thickness and height of the peri-implant bone were measured immediately after implant placement (T0) with a periodontal probe and recorded to the nearest 0.5 mm. After 3 months of submerged healing (T1), implants were uncovered and measurements were repeated with the same protocol. Kruskal-Wallis test for independent samples was used to compare bone changes from T0 to T1. Multivariate linear regression models were built to assess the influence of different variables on buccal and palatal EMBL.ResultsNinety patients (50 females, 40 males, mean age 42.9 ± 15.1 years), treated with the insertion of 90 implants in maxillary premolar area, were included in the final analysis. Mean buccal and palatal bone thickness at T0 were 2.42 ± 0.64 mm and 1.31 ± 0.38 mm, respectively. Mean buccal and palatal bone thickness at T1 were 1.92 ± 0.71 mm and 0.87 ± 0.49 mm, respectively. Changes in both buccal and palatal thickness from T0 to T1 resulted statistically significant (p = 0.000). Changes in vertical bone levels from T0 to T1 resulted not significant both on buccal (mean vertical resorption 0.04 ± 0.14 mm; p = 0.479) and palatal side (mean vertical resorption 0.03 ± 0.11 mm; p = 0.737). Multivariate linear regression analysis showed a significant negative correlation between vertical bone resorption and bone thickness at T0 on both buccal and palatal side.ConclusionThe present findings suggest that a bone envelope > 2 mm on the buccal side and > 1 mm on the palatal side may effectively prevent peri-implant vertical bone resorption following surgical trauma.Trial registrationThe present study was retrospectively recorded in a public register of clinical trials ( www.Clinicaltrialsgov - NCT05632172) on 30/11/2022.
| S-EPMC10204312 | biostudies-literature