Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Lignosulfonate-Based Polyurethane Adhesives.

ABSTRACT: The feasibility of using lignosulfonate (LS) from acid sulphite pulping of eucalyptus wood as an unmodified polyol in the formulation of polyurethane (PU) adhesives was evaluated. Purified LS was dissolved in water to simulate its concentration in sulphite spent liquor and then reacted with 4,4'-diphenylmethane diisocyanate (pMDI) in the presence or absence of poly(ethylene glycol) with M_w 200 (PEG₂₀₀) as soft crosslinking segment. The ensuing LS-based PU adhesives were characterized by infrared spectroscopy and thermal analysis techniques. The adhesion strength of new adhesives was assessed using Automated Bonding Evaluation System (ABES) employing wood strips as a testing material. The results showed that the addition of PEG₂₀₀ contributed positively both to the homogenization of the reaction mixture and better crosslinking of the polymeric network, as well as to the interface interactions and adhesive strength. The latter was comparable to the adhesive strength recorded for a commercial white glue with shear stress values of almost 3 MPa. The optimized LS-based PU adhesive formulation was examined for the curing kinetics following the Kissinger and the Ozawa methods by non-isothermal differential scanning calorimetry, which revealed the curing activation energy of about 70 kJ·mol^-1.

SUBMITTER: Magina S

PROVIDER: S-EPMC8622556 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Graphene Materials Strengthen Aqueous Polyurethane Adhesives.

Project description:Carboxyl-functionalized graphene platelets (GP) and graphene oxide (GO) sheets were added to a commercial aqueous adhesive dispersion of thermoplastic polyurethane (TP) (Idrotex 200 from FacGB s.r.l.). For both additives, the weight percentage was of industrial interest, 0.01 and 0.1 wt %. The addition of GP/GO was carried out in a simple and scalable-up process that can be applied to other materials and additives. Mechanical, peel tests were applied on polyurethane strips (75 mm long, 15 mm wide, and 1.5 mm thick) prepared cutting extruded sheets obtained using Estane 58091, a 70D aromatic polyester-based TP. The tests with 0.01 wt % of GP showed statistically significant higher forces at first failure and maximum forces with respect to the pristine adhesive. Sample characterization was carried out with scanning electron microscopy, infrared spectroscopy, X-ray diffraction, and thermal analysis. A mechanism is suggested for the improved performance of the low-dose GP adhesive.

| S-EPMC6645141 | biostudies-literature

Non-Furanic Humins-Based Non-Isocyanate Polyurethane (NIPU) Thermoset Wood Adhesives.

Project description:Predominantly non-furanic commercial humins were used to prepare humin-based non-isocyanate polyurethane (NIPU) resins for wood panel adhesives. Pure humin-based NIPU resins and tannin-humin NIPU resins were prepared, the latter to upgrade the humins' performance. Species in the raw humins and species formed in the NIPU resins were identified by Matrix Assisted Laser Desorption Ionization Time of Flight (MALDI ToF) spectrometry and Fourier Transform Infrared (FTIR). Humins, fulvic acid and derivatives, humic acid and its fragments, some lignans present and furanic oligomers present formed NIPU linkages. Thermomechanical analysis (TMA) showed that as with other biomaterials-based NIPU resins, all these resins also showed two temperature peaks of curing, the first around 130 °C and the second around 220 °C. A decrease in the Modulus of Elasticity (MOE) between the two indicated that the first curing period corresponded to linear growth of the oligomers forming a physical entanglement network. This then disentangled, and the second corresponded to the formation of a chemical cross-linked network. This second peak was more evident for the tannin-humin NIPU resins. All the laboratory particleboard made and tested either bonded with pure humins or with tannin-humin NIPU adhesives satisfied well the internal bond strength requirements of the relevant standard for interior grade panels. The tannin-humin adhesives performed clearly better than the pure humins one.

| S-EPMC7865859 | biostudies-literature

Fast Curing Multifunctional Tissue Adhesives of Sericin-Based Polyurethane-Acrylates for Sternal Closure.

Project description:The use of wire cerclage after sternal closure is the standard method because of its rigidity and strength. Despite this, they have many disadvantages such as tissue trauma, operator-induced failures, and the risk of infection. To avoid complications during sternotomy and promote tissue regeneration, tissue adhesives should be used in post-surgical treatment. Here, we report a highly biocompatible, biomimetic, biodegradable, antibacterial, and UV-curable polyurethane-acrylate (PU-A) tissue adhesive for sternal closure as a supportive to wire cerclage. In the study, PU-As were synthesized with variable biocompatible monomers, such as silk sericin, polyethylene glycol, dopamine, and an aliphatic isocyanate 4,4'-methylenebis(cyclohexyl isocyanate). The highest adhesion strength was found to be 4322 kPa, and the ex vivo compressive test result was determined as 715 kPa. The adhesive was determined to be highly biocompatible (on L-929 cells), biodegradable, and antibacterial (on Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus bacteria). Finally, after opening the sternum of rats, the adhesive was applied to bond the bones and cured with UV for 5 min. According to the results, there was no visible inflammation in the adhesive groups, while some animals had high inflammation in the cyanoacrylate and wire cerclage groups. These results indicate that the adhesive may be suitable for sternal fixation by preventing the disadvantages of the steel wires and promoting tissue healing.

| S-EPMC9501797 | biostudies-literature

The Effect of Silica-Filler on Polyurethane Adhesives Based on Renewable Resource for Wood Bonding.

Project description:The aim of the study was to evaluate the applicability and performance of polyglycerol- and sucrose-based polyols as components of a simplified formulation of polyurethane adhesives. Colloidal silica was used as a viscosity control and reinforcing agent. The adhesives were examined in terms of reactivity, thermal stability, viscosity, work of adhesion, wetting, surface energy, and bonding strength on wooden substrates. Silica was found to increase gelling time, but markedly improved bonding strength and adhesion with substrates. Bonded solid beech wood samples prepared at 80, 110, and 130 °C showed shear strengths between 7.1 MPa and 9.9 MPa with 100% wood failure. The renewable resource-based polyols were demonstrated to be useful in formulation of polyurethane adhesives for furniture industry-especially with silica as a filler.

| S-EPMC7598712 | biostudies-literature

Synthesis and Mechanical Performances of Polyurethane Bio-Based Adhesives Resulted from the Depolymerization of Lignocellulose Biomass.

Project description:The purpose of this study is to valorize biomass waste into products with added value for indoor applications. Thus, broadleaf sawdust was chemically processed by the solvolysis reaction in acid catalysis in the presence of diethylene glycol at 160 °C for 4 h. After filtration and removal of the unreacted biomass, the glycolysis product was used in 6 different polyurethane adhesive formulations for wood bonding. The adhesive films were characterized by FT-IR, TGA, and DMA, while the mechanical performances were investigated by tensile and three-point bending tests. An innovative method for the determination of the working time was proposed. After the displacement of the wood substrates by the tensile test, the bonded area was investigated by SEM analysis. To confirm a correlation between the mechanical performances of the adhesives and their structure/formulation, two-dimensional (2D) simulations were performed based on the tensile tests.

| S-EPMC10586253 | biostudies-literature

Preparation of self-healing polyurethane/functionalized graphene nanocomposites as electro-conductive one part adhesives.

Project description:We report the synthesis and investigation of the electrical conductivity and self-healing properties of moisture curable polyurethane (PU) adhesives filled with functionalized graphene nanosheets and isophorone diisocyanate (IPDI) loaded poly(methyl methacrylate) (PMMA) nanocapsules. For this purpose, chemically functionalized graphene was prepared by covalently grafting 4-(4,5-diphenyl-1H-imidazol-2-yl)phenol (DIP) on the surface of graphene oxide and synthesized PMMA nanocapsules were loaded with IPDI. Both nanofillers were then dispersed in a polyurethane matrix and the effects on the adhesion properties of the adhesives in aluminum-aluminum metal joints were studied. The results showed that by surface modification and better exfoliation of graphene nanosheets, the electrical conductivity was increased from 2.2 × 10-9 S m-1 to 4.1 S m-1 for pure PU and 10 wt% graphene based nanofiller loaded PU, respectively. The thermal stability, electrical conductivity, shear strength and self-healing process of the ECAs were also studied. The results provide evidence that the prepared adhesives have the potential for applications in electronic device packaging.

| S-EPMC9085647 | biostudies-literature

Lignosulfonate-Based Conducting Flexible Polymeric Membranes for Liquid Sensing Applications.

Project description:In this study, lignosulfonate (LS) from the acid sulfite pulping of eucalypt wood was used to synthesize LS-based polyurethanes (PUs) doped with multiwalled carbon nanotubes (MWCNTs) within the range of 0.1-1.4% w/w, yielding a unique conducting copolymer composite, which was employed as a sensitive material for all-solid-state potentiometric chemical sensors. LS-based PUs doped with 1.0% w/w MWCNTs exhibited relevant electrical conductivity suitable for sensor applications. The LS-based potentiometric sensor displayed a near-Nernstian or super-Nernstian response to a wide range of transition metals, including Cu(II), Zn(II), Cd(II), Cr(III), Cr(VI), Hg(II), and Ag(I) at pH 7 and Cr(VI) at pH 2. It also exhibited a redox response to the Fe(II)/(III) redox pair at pH 2. Unlike other lignin-based potentiometric sensors in similar composite materials, this LS-based flexible polymeric membrane did not show irreversible complexation with Hg(II). Only a weak response toward ionic liquids, [C2mim]Cl and ChCl, was registered. Unlike LS-based composites comprising MWCNTs, those doped with graphene oxide (GO), reduced GO (rGO), and graphite (Gr) did not reveal the same electrical conductivity, even with loads up to 10% (w/w), in the polymer composite. This fact is associated, at least partially, with the different filler dispersion abilities within the polymeric matrix.

| S-EPMC8470934 | biostudies-literature

Synthesis of Lignosulfonate-Based Dispersants for Application in Concrete Formulations.

Project description:Lignosulfonates (LS) are products from the sulfite pulping process that could be applied as renewable environmentally-friendly polymeric surfactants. Being widely used as plasticizers and water-reducing admixtures in concrete formulations LS compete in the market with petroleum-based superplasticizers, such as naphthalene sulfonate formaldehyde polycondensate (NSF) and copolymer polycarboxylate ethers (PCE). In this work, different chemical modification strategies were used to improve LS performance as dispersants for concrete formulations. One strategy consisted in increasing the molecular weight of LS through different approaches, such as laccase and polyoxometalate-mediated polymerization, glyoxalation, and reversible addition-fragmentation chain transfer (RAFT) polymerization. The other strategy consisted of preparing LS-based non-ionic polymeric dispersants using two different epoxidized oligomer derivatives of poly(ethylene glycol) (PEG) and poly(propylene glycol) (PPG). Modified LS were used to prepare cement pastes, which were examined for their fluidity. Results revealed that the most promising products are PPG-modified LS due to the introduction of PPG chains by reaction with phenolic moieties in LS. The enhanced dispersant efficiency of the ensuing products is probably related not only to electrostatic repulsion caused by the sulfonic ionizable groups in LS but also to steric hindrance phenomena due to the grafted bulky PPG chains.

| S-EPMC8658405 | biostudies-literature

Designing New Sustainable Polyurethane Adhesives: Influence of the Nature and Content of Diels-Alder Adducts on Their Thermoreversible Behavior.

Project description:With a view to the development of new sustainable and functional adhesives, two Diels-Alder (DA) adducts are incorporated as a third component into the curing process of solvent-based and solvent-free polyurethanes in this study. The influence of the nature and content of the DA molecules on the retro-DA (rDA) reaction and its reversibility and cyclability is investigated. It is demonstrated that the bonding/debonding properties of the adhesives are mainly controlled by the concentration of the DA adducts, with a minimum thermoreversible bond (TB) content required that depends on the system and the total ratio between all the diols in the formulation. For the solvent-based system, rDA/DA reversibility can be repeated up to ~20 times without deterioration, in contrast to the solvent-free system where a gradual loss in the DA network reconstruction efficiency is observed. Despite this limitation, the solvent-free system presents clear advantages from an environmental point of view. The changes observed in the physical properties of these new thermoreversible adhesives are of great relevance for recycling strategies and, in particular, their potential for separating multilayered film packaging materials in order to recycle the individual polymer films involved.

| S-EPMC9414518 | biostudies-literature

Preparation of lignosulfonate-based nanofiltration membranes with improved water desalination performance.

Project description:Pulping and papermaking generate large amounts of waste in the form of lignosulfonates which have limited valorized applications so far. Herein, we report a novel lignosulfonate-based nanofiltration membrane, prepared by using polyethylenimine (PEI) and sodium lignosulfonate (SL) via a layer-by-layer (LbL) self-assembly. As a low-cost and renewable natural polyelectrolyte, SL is selected to replace the synthetic polyelectrolyte commonly used in the conventional LbL fabrication for composite membranes. The prepared LbL (PEI/SL)7 membranes were crosslinked by glutaraldehyde (GA) to obtain (PEI/SL)7-GA membranes with compact selective layer. We characterized (PEI/SL)7 and (PEI/SL)7-GA membranes to study the chemical compositions, morphologies, and surface hydrophilicity. To improve the nanofiltration performances of the (PEI/SL)7-GA membranes for water desalination, we investigated the effects of the crosslinking time, GA concentration and the NaCl supporting electrolyte on membrane structure and performance. The optimized (PEI/SL)7-GA membrane exhibited a permeating flux up to 39.6 L/(m2·h) and a rejection of 91.7% for the MgSO4 aqueous solution 2.0 g/L concentration, showing its promising potential for water desalination. This study provides a new approach to applying the underdeveloped lignin-based biomass as green membrane materials for water treatment.

| S-EPMC8182288 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data