Browse
Submit Data
Databases
API
Help

Dataset Information

32 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Organic Dye-Derived N, S Co-Doped Porous Carbon Hosts for Effective Lithium Polysulfide Confinement in Lithium-Sulfur Batteries.

ABSTRACT: Lithium-sulfur batteries are considered as attractive candidates for next-generation energy storage systems originating from their high theoretical capacity and energy density. However, the severe shuttling of behavior caused by the dissolution of lithium polysulfide intermediates during cycling remains a challenge for practical applications. Herein, porous carbon materials co-doped with nitrogen and sulfur atoms were prepared through a facile hydrothermal reaction of graphene oxide and methylene blue to obtain a suitable host structure for regulating the lithium polysulfide shuttling behavior. Experimental results demonstrated that the abundant heteroatom-containing moieties in the carbon frameworks not only generated favorable active sites for capturing lithium polysulfide but also enhanced redox reaction kinetics of lithium polysulfide intermediates. Consequently, the corresponding sulfur composite electrodes exhibited excellent rate performance and cycling stability along with high Columbic efficiency. This work highlights the approach for the preparation of nitrogen and sulfur co-doped carbon materials derived from organic dye compounds for high performance energy storage systems.

SUBMITTER: Kim E

PROVIDER: S-EPMC8624343 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Hollow N-doped Carbon Polyhedrons with Hierarchically Porous Shell for Confinement of Polysulfides in Lithium-Sulfur Batteries.

Project description:Herein, hollow N-doped carbon polyhedrons with hierarchical pores were fabricated by etching ZIF-8 crystals and were first used as the host of sulfur for lithium-sulfur batteries. This host possesses both micropores and mesopores, and inner wide cavities, which enable the sulfur to effectively immerse into the polyhedrons without obstacles and simultaneously restrict the escaping of polysulfides by outer carbon shell and abundant N sites. Hence, the polyhedron host combines the physical confinement and chemical interaction for polysulfides by virtue of the unique architecture. As a result, the hierarchically porous polyhedron enables a sulfur content of 72 wt% and achieves a faster polysulfide trapping and better electrochemical performance than the ZIF-8-derived microporous host at the sulfur loading of 1 and 5 mg cm-2.

| S-EPMC6417269 | biostudies-literature

Chloride-Reinforced Carbon Nanofiber Host as Effective Polysulfide Traps in Lithium-Sulfur Batteries.

Project description:Lithium-sulfur (Li-S) battery is one of the most promising alternatives for the current state-of-the-art lithium-ion batteries due to its high theoretical energy density and low production cost from the use of sulfur. However, the commercialization of Li-S batteries has been so far limited to the cyclability and the retention of active sulfur materials. Using co-electrospinning and physical vapor deposition procedures, we created a class of chloride-carbon nanofiber composites, and studied their effectiveness on polysulfides sequestration. By trapping sulfur reduction products in the modified cathode through both chemical and physical confinements, these chloride-coated cathodes are shown to remarkably suppress the polysulfide dissolution and shuttling between lithium and sulfur electrodes. From adsorption experiments and theoretical calculations, it is shown that not only the sulfide-adsorption effect but also the diffusivity in the vicinity of these chlorides materials plays an important role on the reversibility of sulfur-based cathode upon repeated cycles. Balancing the adsorption and diffusion effects of these nonconductive materials could lead to the enhanced cycling performance of an Li-S cell. Electrochemical analyses over hundreds of cycles indicate that cells containing indium chloride-modified carbon nanofiber outperform cells with other halogenated salts, delivering an average specific capacity of above 1200 mAh g-1 at 0.2 C.

| S-EPMC5157171 | biostudies-literature

A novel quasi-solid state electrolyte with highly effective polysulfide diffusion inhibition for lithium-sulfur batteries.

Project description:Polymer solid state electrolytes are actively sought for their potential application in energy storage devices, particularly lithium metal rechargeable batteries. Herein, we report a polymer with high concentration salts as a quasi-solid state electrolyte used for lithium-sulfur cells, which shows an ionic conductivity of 1.6 mS cm(-1) at room temperature. The cycling performance of Li-S battery with this electrolyte shows a long cycle life (300 cycles) and high coulombic efficiency (>98%), without any consuming additives in the electrolyte. Moreover, it also shows a remarkably decreased self-discharge (only 0.2%) after storage for two weeks at room temperature. The reason can be attributed to that the electrolyte can suppress polysulfide anions diffusion, due to the high ratio oxygen atoms with negative charges which induce an electrical repulsion to the polysulfide anions, and their relatively long chains which can provide additional steric hindrance. Thus, the polysulfide anions can be located around carbon particles, which result in remarkably improved overall electrochemical performance, and also the electrolyte have a function of suppress the formation of lithium dendrites on the lithium anode surface.

| S-EPMC4857097 | biostudies-literature

Synergy between Interconnected Porous Carbon-Sulfur Cathode and Metallic MgB2 Interlayer as a Lithium Polysulfide Immobilizer for High-Performance Lithium-Sulfur Batteries.

Project description:Lithium-sulfur (Li-S) batteries are the potential candidates for developing high-energy-density electric vehicles. However, poor electrical conductivity of sulfur/discharged products, low active material utilization, shuttle mechanism, and poor cycle life remain the major challenges for the development of Li-S batteries. Herein, we report the nitrogen-doped highly porous carbon (NC) with interconnected pores as the sulfur host (NC-S), which is synthesized by a facile one-step process without using any template and activation agents. The highly interconnected porous structure of NC can accommodate a high amount of sulfur loading and provide space for sulfur volume expansion during redox reactions. Besides, to mitigate the lithium polysulfide dissolution and shuttle mechanism, metallic and polar magnesium diboride (MgB2) is used as an interlayer. Consequently, the NC-S/MgB2 cathode delivers higher specific capacity, rate capability, and excellent cyclic stability than the NC-S cathode and bulk sulfur cathode with MgB2 interlayer. The lithium polysulfide (LPS) adsorption test shows that MgB2 has strong chemisorption toward lithium polysulfides, which can inhibit the dissolution of LPS into the electrolyte and minimizes the shuttle effect. The dynamic electrochemical impedance spectroscopy analysis investigates the electrochemical reaction kinetics of the NC-S/MgB2 cathode during the charging and discharging processes. Overall, this work demonstrates that the synergy between the nitrogen-doped porous carbon-sulfur host and polar metallic MgB2 improves the performance of the Li-S battery, which is beneficial for the development of high-energy-density batteries for the future.

| S-EPMC7482300 | biostudies-literature

The Polysulfide-Cathode Binding Energy Landscape for Lithium Sulfide Growth in Lithium-Sulfur Batteries.

Project description:A cathode substrate with strong adsorption of lithium polysulfides (LiPSs) has been preferred for lithium-sulfur (Li-S) batteries. However, the recent finding that controlled growth of lithium sulfides (Li2 S) during discharge is crucial for S utilization stimulates improvement of this preference. Here, the Li2 S growth and cell capacity in the LiPS binding energy landscape of cathode substrates are investigated. Specifically, Co-based ternary oxides are employed to obtain binding energies in the range of 4.0-7.4 eV. Of these substrates, only the MnCo2 O4 substrate with moderate LiPS affinity exhibits 3D Li2 S growth. The MnCo2 O4 cells achieve high sulfur utilization up to 84% at 0.2 C and excellent performance even under high sulfur loading/lean electrolyte conditions. In contrast, weak affinity substrates such as ZnCo2 O4 and strong affinity substrates such as NiCo2 O4 and CuCo2 O4 exhibit low discharge capacity with 2D Li2 S growth. For optimal LiPS affinity driving 3D growth, a balance between promoting LiPS adsorption and diffusion limitation in the LiPS adsorption layer is suggested.

| S-EPMC10131804 | biostudies-literature

Hierarchical TiO2 spheres as highly efficient polysulfide host for lithium-sulfur batteries.

Project description:Hierarchical TiO2 micron spheres assembled by nano-plates were prepared through a facile hydrothermal route. Chemical tuning of the TiO2 through hydrogen reduction (H-TiO2) is shown to increase oxygen-vacancy density and thereby modifies the electronic properties. H-TiO2 spheres with a polar surface serve as the surface-bound intermediates for strong polysulfides binding. Under the restricting and recapturing effect, the sulfur cathode could deliver a high reversible capacity of 928.1?mA h g(-1) after 50 charge-discharge cycles at a current density of 200?mA g(-1). The H-TiO2 additive developed here is practical for restricting and recapturing the polysulfide from the electrolyte.

| S-EPMC4786857 | biostudies-other

Influence of Lithium Polysulfide Clustering on the Kinetics of Electrochemical Conversion in Lithium-Sulfur Batteries.

Project description:The electrochemistry of lithium-sulfur (Li-S) batteries is heavily reliant on the structure and dynamics of lithium polysulfides, which dissolve into the liquid electrolyte and mediate the electrochemical conversion process during operation. This behavior is considerably distinct from the widely used lithium-ion batteries, necessitating new mechanistic insights to fully understand the electrochemical phenomena. Testing at low-temperature conditions presents a unique opportunity to glean new insights into the chemistry in kinetically constrained environments. Under such conditions, despite the low freezing point and favorable ionic conductivity of the glyme-based electrolyte, Li-S batteries exhibit counterintuitively poor performance. Here, we show that beyond just existing in single-molecule conformations, lithium polysulfides tend to cluster and aggregate in solution, particularly at low-temperature conditions, which subsequently constrains the kinetics of electrochemical conversion. Energetics and coordination implications of this behavior are extended towards a new framework for understanding the solution-coordination dynamics of dissolved lithium species. Based off this framework, a favorable strongly-bound lithium salt is introduced in the Li-S electrolyte to disrupt polysulfide clustered networks, enabling substantially enhanced low-temperature electrochemical performance. More broadly, this mechanistic insight heightens our understanding of polysulfide chemistry irrespective of temperature, confirming the link between the solution conformation of active material and electrochemical behavior.

| S-EPMC7939025 | biostudies-literature

Attention-based solubility prediction of polysulfide and electrolyte analysis for lithium-sulfur batteries.

Project description:During the continuous charge and discharge process in lithium-sulfur batteries, one of the next-generation batteries, polysulfides are generated in the battery's electrolyte, and impact its performance in terms of power and capacity by involving the process. The amount of polysulfides in the electrolyte could be estimated by the change of the Gibbs free energy of the electrolyte, [Formula: see text] in the presence of polysulfide. However, obtaining [Formula: see text] of the diverse mixtures of components in the electrolyte is a complex and expensive task that shows itself as a bottleneck in optimization of electrolytes. In this work, we present a machine-learning approach for predicting [Formula: see text] of electrolytes. The proposed architecture utilizes (1) an attention-based model (Attentive FP), a contrastive learning model (MolCLR) or morgan fingerprints to represent chemical components, and (2) transformers to account for the interactions between chemicals in the electrolyte. This architecture was not only capable of predicting electrolyte properties, including those of chemicals not used during training, but also providing insights into chemical interactions within electrolytes. It revealed that interactions with other chemicals relate to the logP and molecular weight of the chemicals.

| S-EPMC10682475 | biostudies-literature

Enhanced catalysis of radical-to-polysulfide interconversion via increased sulfur vacancies in lithium-sulfur batteries.

Project description:The practical application of lithium-sulfur (Li-S) batteries is seriously hindered by severe lithium polysulfide (LiPS) shuttling and sluggish electrochemical conversions. Herein, the Co9S8/MoS2 heterojunction as a model cathode host material is employed to discuss the performance improvement strategy and elucidate the catalytic mechanism. The introduction of sulfur vacancies can harmonize the chemisorption of the heterojunction component. Also, sulfur vacancies induce the generation of radicals, which participate in a liquidus disproportionated reaction to reduce the accumulation of liquid LiPSs. To assess the conversion efficiency from liquid LiPSs to solid Li2S, a new descriptor calculated from basic cyclic voltammetry curves, nucleation transformation ratio, is proposed.

| S-EPMC9159087 | biostudies-literature

Co-doped g-C3N4 nanotube decorated separators mediate polysulfide redox for high performance lithium sulfur batteries.

Project description:The main issue with lithium-sulfur (Li-S) batteries is the serious irreversible capacity loss caused by the polysulfide shuttle process. In this work, we propose an electro-catalytic strategy for absorbing and transferring long-chain polysulfides during the redox process, which is the key to improving the utilization of S. Reported here is a Co doped tubular g-C3N4 (CN) modified separator (Co-TCN@PP), which successfully inhibited the polysulfide shuttle by physical absorption and catalysis, thus facilitating the high utilization of S. Co-TCN with a tube-like structure ensures the uniform dispersion of Co nanoparticles, which provides abundant active sites to absorb polysulfides. Furthermore, Co-TCN exhibits fast reaction kinetics for polysulfide conversion. A Li-S battery with Co-TCN@PP achieves superior rate capacities and a long cycle life (400 times) with capacity fading as low as 0.07% per cycle at a high Li+ insertion/extraction rate of 2C. Moreover, electrodes with a high sulfur loading of 5.6 mg cm-2 can be realized by adopting the Co-TCN@PP separator.

| S-EPMC9846446 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data